

What's in the box – RAP-B-304U-TRA1
RAM Mounts Track Ball Base with Drill-Down Receiver (RAP-B-304U-TRA1) gives a boat console or kayak deck a mounting point that almost disappears when not in use. The flat receiver is screwed down permanently; the B-size Track Ball slides into it on a T-bolt and is tightened in place. Slide the ball – with arm and device – out again and only the low receiver stays behind.
Build the mount on the Track Ball with a composite B-size arm and a holder such as the X-Grip phone holder. Extra receiver bases let one ball and device move between spots on the boat.
Key Features
- Disappears when not needed – the ball slides out of the receiver, leaving a low, flat base on the surface
- Permanent base, removable ball – the receiver screws down; the Track Ball locks in with its T-bolt
- Standard 2-hole AMPS – the receiver has the 48.6 mm (1.912") 2-hole AMPS pattern
- For small devices – phones, cameras and small tablets on a B-size ball, 0.9 kg (2 lb) in standard use
- Rust-free composite – high-strength composite, about 0.05 kg
On the water
On kayaks and small power boats, a permanent ball sticks up where paddles, lines and legs catch on it. With this receiver you leave nothing raised on deck between trips and carry the phone or camera mount in your bag. The composite parts do not corrode.
Compatibility
- Flat surfaces on power boats and kayaks, or any other flat surface you can drill
- All RAM B-size (25.4 mm / 1") double socket arms
- Phones, cameras and small tablets in suitable RAM holders
Technical Specifications
| Part Number | RAP-B-304U-TRA1 |
|---|---|
| Kit Contents | RAP-304U universal receiver base, RAP-B-354U-TRA1 Track Ball with T-bolt |
| Hole Pattern | 2-hole AMPS, 48.6 mm (1.912") |
| Ball Size | B, 25.4 mm (1") |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | High-strength composite |
| Mounting Type | Drill-down |
| Weight | 0.05 kg (0.12 lb) |
| In the Box | Receiver base, Track Ball with T-bolt |
Outfitting a kayak rental, a fishing guide service or a fleet of small boats? As an Official RAM Mounts Reseller we supply receivers and Track Balls in sets so every hull has the same mounting point.
Questions about RAP-B-304U-TRA1
Can I take the ball off when I am done?
Yes. Loosen it and slide the Track Ball out of the receiver. The receiver stays screwed to the deck with nothing sticking up.
What can I mount on it?
Small devices such as phones, cameras or small tablets, using a B-size arm and a holder. The ball is rated 0.9 kg (2 lb) in standard use.
How is it different from RAP-B-304U?
RAP-B-304U pairs the same receiver with a diamond ball base. This kit pairs it with a sliding Track Ball and is meant to be screwed to a surface.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

