

What's in the box – RAP-394-SSBMPU
RAM Mounts Tough-Tube Rod Holder with Bulkhead/Flat Surface Base (RAP-394-SSBMPU) is the complete screw-down version: tube, 2" ratchet post and the RAM ROD combination base in one box. The base works lying flat on a deck or standing upright on a bulkhead, and a plunger keeps the post captive until you press it. It suits a sit-on-top kayak as well as a tournament boat.
Want no screws on show? The round flush kit sits in the gunwale; on a kayak with track, RAP-394-418 needs no drilling. A spare bulkhead/flat surface base gives the tube a second position.
Key Features
- Deck or bulkhead – the combination base screws down horizontally or vertically, hole pattern 33 × 81 mm (1.3" × 3.19")
- Plunger lock – the post cannot lift out until the plunger is released, so the holder does not come out by accident
- 180° ratchet tilt – the 51 mm (2") ratchet spline post angles the tube forward or back
- Room for the rod butt – inside diameter 48.3 mm (1.9"), inside length 254 mm (10")
- All composite – high-strength composite, 0.57 kg (1.25 lb) for the complete kit
Compatibility
- Flat decks and vertical bulkheads on kayaks and power boats
- RAM ROD holders and accessories with a spline post, in the same base
Technical Specifications
| Part Number | RAP-394-SSBMPU |
|---|---|
| Kit Contents | RAP-394-SSTU Tough-Tube with 2" ratchet spline post, RAM-114BMPU bulkhead/flat surface base |
| Tube | Inside diameter 48.3 mm (1.9"); inside length 254 mm (10") |
| Post Length | 51 mm (2") |
| Hole Pattern | 33 × 81 mm (1.3" × 3.19") |
| Mounting Type | Drill-down, horizontal or vertical |
| Materials | High-strength composite |
| Weight | 0.57 kg (1.25 lb) |
| In the Box | Tough-Tube rod holder with 2" ratchet spline post, bulkhead/flat surface base |
Fitting rod holders across a charter boat or a guiding fleet? As an Official RAM Mounts Reseller we can deliver the same Tough-Tube kit for every boat and quote volume pricing.
Questions about RAP-394-SSBMPU
Can the base go on a vertical surface?
Yes. The combination base mounts flat on a deck or upright on a bulkhead or console side, using the 33 × 81 mm hole pattern.
How do I take the rod holder off?
Release the plunger on the base and lift the post out. The base stays screwed down, ready for next time.
How does it differ from RAP-394-SSFU?
Both screw down. This kit has the plunger-locking bulkhead/flat surface base; RAP-394-SSFU uses a square flush base that screws down through four holes.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

