

What's in the box – RAP-SB-178U
RAM Mounts Snap-Link Flex Adhesive Dashboard Mount (RAP-SB-178U) is the bare base behind RAM's flex adhesive dash kits: a peel-and-stick Flex-Base, a 3/4" Snap-Link ball and a socket topped with an angled diamond plate. Bolt your own holder or cradle to the 2-hole AMPS plate and a light device gets a no-drill place on a car or truck dashboard. Unlike the complete kits, such as the version with a phone holder, it comes without a holder.
Preparing a second vehicle? The Flex-Base adhesive mount is also sold on its own. For a finished set, the Finger-Grip radio and GPS kit uses this same base.
Key Features
- No drilling – a 63.5 mm (2.5") double-sided adhesive pad fixes the composite Flex-Base to the dash; an alcohol prep pad for cleaning the spot is included
- Takes 2-hole AMPS holders – the angled diamond plate on the socket has two holes 48.6 mm (1.912") apart
- Friction you can set – tighten the screw on the Snap-Link socket until the holder moves by hand but stays where you leave it
- Sized for light devices – rated for 0.23 kg (0.5 lb) in total, which suits small phones, compact GPS units and handheld radios
- Three replaceable parts – Flex-Base adhesive mount (RAP-273U), Snap-Link ball with diamond plate (RAP-SB-238U) and Snap-Link socket with angled diamond plate (RAP-SB-275-45U)
Compatibility
- RAM holders and cradles with the 2-hole AMPS pattern (48.6 mm / 1.912") and a total weight up to 0.23 kg (0.5 lb)
- RAM Snap-Link (3/4") components
- Clean dashboard and console surfaces in cars and trucks
Technical Specifications
| Part Number | RAP-SB-178U |
|---|---|
| Kit Contents | RAP-273U Flex-Base adhesive mount, RAP-SB-238U Snap-Link ball with diamond plate, RAP-SB-275-45U Snap-Link socket with angled diamond plate |
| Ball Size | RAM Snap-Link, 19 mm (3/4") |
| Hole Pattern | 2-hole AMPS, 48.6 mm (1.912") |
| Load Capacity | 0.23 kg (0.5 lb) |
| Materials | High-strength composite |
| Mounting Type | Adhesive |
| Weight | 0.08 kg (0.17 lb) |
| In the Box | Flex-Base, Snap-Link ball, Snap-Link socket, assembly hardware, double-sided adhesive pad, alcohol prep pad |
Standardising small-device mounts across a car or van fleet? As an Official RAM Mounts Reseller we supply this base on its own or as complete kits, with project pricing for larger rollouts.
Complete RAM mounts with this part (6)
Every complete mount below includes this part.
Power Plate II Magnetic Holder with Snap-Link Flex Adhesive Base
46,92 € +VATOut of stock
Belt Clip Holder with Snap-Link Flex Adhesive Dashboard Mount
41,94 € +VATOut of stock
Flex Adhesive Dashboard Mount for Garmin GPSMAP 176C, 396, 496 + More, Snap-Link
40,05 € +VATOut of stock
Flex Adhesive Dashboard Mount for Magellan eXplorist GC, 110, 310 & 350H, Snap-Link
42,65 € +VATOut of stock
Spring Loaded Small Phone Holder with Flex Adhesive Dashboard Mount, Snap-Link
81,99 € +VATOut of stock
Finger-Grip GPS & Radio Holder with Flex Adhesive Dashboard Mount, Snap-Link
80,09 € +VATOut of stock
Questions about RAP-SB-178U
Does RAP-SB-178U come with a phone or GPS holder?
No. It is the base only and ends in a 2-hole AMPS diamond plate. For a ready-made set, choose a kit with a holder, for example {{RAP-SB-178-UN1U}} (spring-loaded phone holder) or {{RAP-SB-178-GA7U}} (Garmin GPSMAP cradle).
Can I connect a B-size RAM arm to it?
Not to the ball or socket: they are Snap-Link 3/4", a smaller size than the 1" B-size system, and the two do not mix.
Will it carry a tablet?
No. The rated load is 0.23 kg (0.5 lb), so it is meant for phones, small GPS units and radios.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.


