

What's in the box – RAP-341
RAM Mounts RAM ROD Fly Rod Holder with Drill-Down Base (RAP-341) is the screw-down version of RAM's Fly Rod Jr. kit. A composite base with a 38.1 mm (1.5") ball is fixed to a flat surface on a kayak or boat, and the holder's socket sits on the ball. Fine changes of rod angle need no knob to be loosened – the holder moves on the ball and stays where you leave it.
Want the rod in a second place? Screw down an extra composite ball base and move the holder between them. Mounting to a rail instead? Use a small Tough-Claw with the holder on its own.
Key Features
- Permanent flat-surface base – the composite ball base screws down with a 38.1 × 50.8 mm (1.5" × 2") hole pattern
- No knob for small changes – the holder turns and tilts on the rubber ball, so the angle can be corrected as the day goes on
- Fly rods and reels – the Fly Rod Jr. tube is designed for fly fishing tackle
- Composite throughout – holder and base are high-strength composite for salt and fresh water
- C-size rated – 1.8 kg (4 lb) standard use, 1.36 kg (3 lb) heavy-duty use
On the kayak
A permanent base is the choice when the rod position is always the same, for example just behind the seat. The holder can be lifted off the ball for transport, and further bases let you move it around the hull.
Compatibility
- Fly rods and reels
- Flat surfaces on kayaks and power boats with room for the 38.1 × 50.8 mm (1.5" × 2") hole pattern
- Other RAM C-size (38.1 mm / 1.5") parts on the same ball
Technical Specifications
| Part Number | RAP-341 |
|---|---|
| Kit Contents | RAP-341NB fly rod holder with single socket, RAP-202U-225 composite ball base |
| Ball Size | C, 38.1 mm (1.5") |
| Hole Pattern | 38.1 × 50.8 mm (1.5" × 2") |
| Load Capacity | 1.8 kg (4 lb) standard use; 1.36 kg (3 lb) heavy-duty use |
| Materials | High-strength composite |
| Mounting Type | Drill-down |
| Weight | 0.40 kg (0.87 lb) |
| In the Box | Fly rod holder with single socket, composite ball base |
Kitting out a fleet of fishing kayaks with fixed fly rod positions? As an Official RAM Mounts Reseller we quote complete RAM ROD sets per boat.
Questions about RAP-341
Are screws included with RAP-341?
No screws are listed for this kit. Use fasteners that suit your deck and the 38.1 × 50.8 mm hole pattern of the base.
Which RAP-341 version should I choose?
RAP-341 screws to a flat surface. RAP-341-TRA1U slides into a kayak track, RAP-341-5 fits an existing RAM 5 spot base, and RAP-341NB is the holder without any base.
Do I have to loosen anything to change the angle?
No. The holder's socket grips the rubber ball firmly, but the rod can still be turned and tilted by hand for small corrections.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

