

What's in the box – RAM-HC1U
RAM Mounts Handi-Case (RAM-HC1U) is a hard composite case with a writing surface on top and storage inside for paperwork, pens and small tools – and, unlike a clipboard, it can be mounted. AMPS and VESA patterns on the outside let it sit on a RAM arm in a van, a truck cab or on a forklift, so delivery notes and pick lists stay in reach. Inside it measures 308 × 251 × 35 mm (12.125" × 9.875" × 1.375").
To mount it, add a B-size or C-size round plate or a C-size VESA 75 plate with a matching arm, and a diamond ball base on top for a phone holder. Ready-made sets: Handi-Case with U-bolt mount and Handi-Case with Slide-N-Lock.
Key Features
- Room for paperwork – internal space of 308 × 251 × 35 mm (12.125" × 9.875" × 1.375") with separate compartments for documents, pens and hardware
- Mounts like a device – AMPS 4-hole, AMPS 2-hole, VESA 75 × 75, VESA 100 × 100 and half VESA 100 × 50 mm patterns for RAM ball bases and plates
- Phone or GPS on top – two mounting points on the lid take a small-electronics holder
- Cable entry – knock-outs on the sides and back let a power cable run into or out of the case
- Magnet pockets – two rare earth magnets hold pens or let the case cling to steel; a RAM pen is included
In the cab and on the warehouse floor
Fixed to a RAM arm, the Handi-Case keeps job sheets, delivery notes and a pen in one place instead of on the seat or the dashboard. Knock-outs on the sides and back let you route a cable into the case. Mount it where it does not block the driver's view or any airbag deployment zone.
Compatibility
- RAM ball bases and plates with AMPS 4-hole, AMPS 2-hole, VESA 75 × 75, VESA 100 × 100 or 100 × 50 mm patterns
- RAM B- and C-size arms via the matching ball base
- Phone or GPS holders on the lid mounting points
Technical Specifications
| Part Number | RAM-HC1U |
|---|---|
| Kit Contents | RAM-HC1-MAGU magnets (2), RAM-PEN1U pen |
| Internal Dimensions | 308 × 251 × 35 mm (12.125" × 9.875" × 1.375") |
| Hole Pattern | AMPS 4-hole; AMPS 2-hole; VESA 75 × 75; VESA 100 × 100; half VESA 100 × 50 mm |
| Hardware Included | 4× #8-32 x 5/8" machine screws; 4× #8-32 nyloc nuts; assembly hardware |
| Materials | High-strength composite |
| Weight | 1.02 kg (2.25 lb) |
| In the Box | Handi-Case, 2 magnets, pen, mounting and assembly hardware |
Equipping a delivery fleet or warehouse trucks with a fixed place for paperwork? As an Official RAM Mounts Reseller we supply Handi-Cases with the right base for each vehicle.
Complete RAM mounts with this part (2)
Every complete mount below includes this part.
Questions about RAM-HC1U
Will an A4 sheet fit inside?
By its internal dimensions of 308 × 251 × 35 mm, yes – an A4 sheet measures 297 × 210 mm.
How do I mount the Handi-Case?
Screw a RAM ball base or plate to one of the AMPS or VESA patterns and connect it with a RAM arm to a base in the vehicle. Four #8-32 screws and nuts are included.
Can I charge a phone in it?
There are knock-outs on the sides and back to run a cable in or out. The case has no charger of its own.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.



