{"title":"RAM Mounts Car, Van \u0026 Truck Mounts","description":"\u003cp\u003eRAM Mounts for cars, vans, pickups and trucks. Phone and tablet holders, laptop mounts, GPS cradles and powered GDS docks, on No-Drill seat-rail bases, drill-down bases or suction cups. Start with the device, choose a base that suits the vehicle, and keep base, arm and holder in the same ball size.\u003c\/p\u003e","products":[{"product_id":"ram-mounts-drill-down-dashboard-mount-with-backing-plate-c-size-short-ram-101-b-225b2u","title":"RAM Mounts Drill-Down Dashboard Mount with Steel Backing Plate, C-Size, Short Arm (RAM-101-B-225B2U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Drill-Down Dashboard Mount with Backing Plate\u003c\/strong\u003e (RAM-101-B-225B2U) is built for screwing a C-size mount into a vehicle dashboard. A 53.3 × 66 mm (2.10\" × 2.60\") steel plate sits behind the dash panel, so the four #8-32 screws pull against steel rather than relying on the plastic alone. Above it, a short arm and a round AMPS plate take almost any RAM holder or dock.\u003c\/p\u003e\n\u003cp\u003eRAM uses this base in complete kits: with a Tab-Tite tablet holder in \u003ca href=\"\/en\/products\/ram-mounts-tab-tite-dashboard-mount-with-backing-plate-for-9-10-5-inch-tablets-with-case-c-size-ram-101b2-tab20u\"\u003eRAM-101B2-TAB20U\u003c\/a\u003e and with a powered Samsung dock in \u003ca href=\"\/en\/products\/ram-mounts-ez-roll-r-usb-c-powered-mount-for-galaxy-tab-active5-active3-c-size-ram-101-225b2-sam60cp-v7cu\"\u003eRAM-101-225B2-SAM60CP-V7CU\u003c\/a\u003e. For bolting through a panel with a rectangular base, compare \u003ca href=\"\/en\/products\/ram-mounts-double-ball-mount-with-aluminium-backing-plate-c-size-short-arm-ram-101-b-sae1\"\u003eRAM-101-B-SAE1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel plate behind the dash\u003c\/strong\u003e – 53.3 × 66 mm (2.10\" × 2.60\") backing plate takes the screw load from the panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete fixing set\u003c\/strong\u003e – 4× #8-32 × 1\" machine screws, 4× #8 split lock washers and 4× #8 flat washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort, steady arm\u003c\/strong\u003e – 63.5 mm (2.5\") socket to socket; 132.7 mm (5.225\") overall height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMPS on top\u003c\/strong\u003e – Ø 63.5 mm (2.5\") round plate with AMPS 4-hole 30 × 38 mm and 3-hole 120° Ø 46 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-size rating\u003c\/strong\u003e – 1.8 kg (4 lb) standard use, 1.36 kg (3 lb) heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle dashboards and other panels where a backing plate can be fitted behind\u003c\/li\u003e\n\u003cli\u003eRAM holders, cradles and docks with AMPS 4-hole or 3-hole 120° pattern\u003c\/li\u003e\n\u003cli\u003eRAM C-size (38.1 mm \/ 1.5\") double socket arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-101-B-225B2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-202-225-2U dashboard ball base with backing plate, RAM-201U-B short arm, RAM-202U round plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eC, 38.1 mm (1.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eShort, 63.5 mm (2.5\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e132.7 mm (5.225\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eRound plate: AMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e1.8 kg (4 lb) standard use; 1.36 kg (3 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware Included\u003c\/th\u003e\n\u003ctd\u003e53.3 × 66 mm (2.10\" × 2.60\") steel backing plate, 4× #8-32 × 1\" machine screws, 4× #8 split lock washers, 4× #8 flat washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eDrill-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.53 kg (1.16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eDashboard ball base, steel backing plate, short double socket arm, round plate, screws and washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eFitting the same holder into a fleet of cars or vans? As an Official RAM Mounts Reseller we supply this dashboard base with the matching holder or dock for every vehicle and quote project pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188825809162,"sku":"ram101b225b2u","price":92.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-101-B-225B2U_1.jpg?v=1792001747"},{"product_id":"ram-mounts-double-socket-arm-b-size-long-152-mm-ram-b-201u-c","title":"RAM Mounts Double Socket Arm, B-Size, Long Arm 135 mm (RAM-B-201U-C)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Double Socket Arm, B-Size Long\u003c\/strong\u003e (RAM-B-201U-C) is the single B-size arm with the most reach: 135 mm (5.31\") socket to socket and 152 mm (6\") end to end. It earns its place when the base can only go somewhere awkward – low on a console, high on a windscreen – yet the screen still has to come towards the driver.\u003c\/p\u003e\n\u003cp\u003eFor a windscreen setup add the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-base-with-ball-b-size-aluminium-ram-b-224-1u\"\u003eTwist-Lock suction cup base\u003c\/a\u003e; for tubes and rails the \u003ca href=\"\/en\/products\/ram-mounts-torque-medium-rail-base-for-19-125-4-mm-rails-b-size-ram-b-408-75-1u\"\u003eTorque medium rail base\u003c\/a\u003e. A larger device such as a 7–8\" tablet fits the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-holder-for-7-inch-8-inch-tablets-with-b-size-ball-ram-hol-un8bu\"\u003eX-Grip tablet holder\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLongest single B-size arm\u003c\/strong\u003e – 135 mm (5.31\") socket to socket, 152 mm (6\") overall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrings the screen to the user\u003c\/strong\u003e – bridges the gap between a base fitted out of the way and the spot where the device is read\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame sockets, more reach\u003c\/strong\u003e – replaces RAM-B-201U or RAM-B-201U-A in an existing mount without changing base or holder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium construction\u003c\/strong\u003e – powder-coated marine-grade aluminium, 0.26 kg (0.57 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e – 0.9 kg (2 lb) standard use, 0.45 kg (1 lb) heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") ball bases, holders and adapters\u003c\/li\u003e\n\u003cli\u003eUsed in RAM's long-arm kits, e.g. suction cup, yoke clamp and marine electronics mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-201U-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eLong, 135 mm (5.31\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e152 mm (6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.26 kg (0.57 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eLong B-size double socket arm with knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003ePlanning mounts for vans, trucks or service vehicles where the base cannot sit near the driver? As an Official RAM Mounts Reseller we help choose arm lengths per vehicle and quote fleet pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188829774090,"sku":"ram201uc","price":38.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-201U-C_1.jpg?v=1792002325"},{"product_id":"ram-mounts-round-plate-with-ball-c-size-amps-pattern-ram-202u","title":"RAM Mounts Round Plate with Ball, AMPS Pattern, C-Size (RAM-202U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Round Plate with Ball\u003c\/strong\u003e (RAM-202U) is the 63.5 mm (2.5\") aluminium disc with a 38.1 mm (1.5\") rubber ball found at one or both ends of most C-size RAM mounts. Screw it to a console, deck or panel as a base, or bolt it to the back of a cradle with an AMPS pattern so the cradle can take a C-size arm. RAM builds it into more than 150 of its kits, which makes it the C-size part most worth keeping as a spare.\u003c\/p\u003e\n\u003cp\u003eJoin two plates with a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-medium-145-mm-ram-201u\"\u003emedium C-size double socket arm\u003c\/a\u003e for a complete mount. Where a lighter, non-metal plate suits better, see the \u003ca href=\"\/en\/products\/ram-mounts-composite-round-amps-plate-with-ball-c-size-rap-202u\"\u003ecomposite version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo hole patterns in one plate\u003c\/strong\u003e – drilled for AMPS 4-hole 30 × 38 mm (1.181\" × 1.496\") and for 3-hole 120° on a Ø 46 mm (1.812\") circle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks as base or adapter\u003c\/strong\u003e – screw it down to a flat surface, or fix it behind a holder so the holder gets a C-size ball\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-size load rating\u003c\/strong\u003e – 1.8 kg (4 lb) in standard use and 1.36 kg (3 lb) in heavy-duty use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for wet conditions\u003c\/strong\u003e – powder-coated marine-grade aluminium; RAM lists it for power boats and kayaks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny C-size arm fits\u003c\/strong\u003e – the 38.1 mm rubber ball takes every RAM C-size double socket arm and damps vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll RAM C-size (38.1 mm \/ 1.5\") double socket arms\u003c\/li\u003e\n\u003cli\u003eHolders, cradles and plates with the AMPS 4-hole (30 × 38 mm) or 3-hole 120° (Ø 46 mm) pattern\u003c\/li\u003e\n\u003cli\u003eFlat surfaces – boat consoles, kayak decks, vehicle panels, workbenches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-202U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate Size\u003c\/th\u003e\n\u003ctd\u003eØ 63.5 mm (2.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\"); 3-hole 120° Ø 46 mm (1.812\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eC, 38.1 mm (1.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e1.8 kg (4 lb) standard use; 1.36 kg (3 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eDrill-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.10 kg (0.23 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eRound plate with C-size ball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eKeeping C-size parts on the shelf for boat or vehicle installations? As an Official RAM Mounts Reseller we supply RAM-202U in quantity, together with the arms and holders it connects.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188829937930,"sku":"ram202u2","price":24.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-202U_1.jpg?v=1792001947"},{"product_id":"ram-mounts-twist-lock-suction-cup-base-for-diamond-ball-bases-rap-224-1u","title":"RAM Mounts Twist-Lock Suction Cup Base for Diamond Ball Bases (RAP-224-1U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Twist-Lock Suction Cup Base\u003c\/strong\u003e (RAP-224-1U) is the Ø 83.8 mm (3.3\") suction cup on its own, topped with a 2-hole AMPS plate rather than a ball. Screw a diamond ball base (RAP-B-238 or RAM-B-238) onto it and you have a windscreen base for B-size arms. RAM builds the same cup into many ready-made mounts, from \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-base-with-ball-b-size-aluminium-ram-b-224-1u\"\u003eRAM-B-224-1U\u003c\/a\u003e with the ball fitted to the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-triple-suction-cup-base-with-ball-c-size-ram-224-3u\"\u003etriple-cup C-size base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAP-224-1U\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTwist-Lock suction cup base\u003c\/strong\u003e – Ø 83.8 mm (3.3\"), 2-hole AMPS 48.6 mm (1.912\") on top\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eSheet metal screws\u003c\/strong\u003e – 2× #10 × 3\/4\" for fixing a diamond base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Prefer the ball already fitted? See \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-base-with-ball-b-size-aluminium-ram-b-224-1u\"\u003eRAM-B-224-1U\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-composite-suction-cup-base-with-ball-b-size-rap-b-224-1u\"\u003ecomposite version with ball\u003c\/a\u003e. For more grip, the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-dual-suction-cup-base-with-amps-plate-ram-b-189bu\"\u003edual suction cup base\u003c\/a\u003e spreads the load over two cups.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds on glass\u003c\/strong\u003e – made for vehicle windscreens and other smooth, non-porous surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-hole AMPS top\u003c\/strong\u003e – 48.6 mm (1.912\") spacing to suit the RAP-B-238 and RAM-B-238 diamond bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo drilling\u003c\/strong\u003e – the cup is set and released by hand and leaves no holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight composite\u003c\/strong\u003e – high-strength composite, 0.09 kg (0.20 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard RAM part\u003c\/strong\u003e – the same cup RAM uses in many of its Twist-Lock kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM diamond ball bases RAP-B-238 and RAM-B-238 (2-hole AMPS, 48.6 mm)\u003c\/li\u003e\n\u003cli\u003eVehicle windscreens and other smooth, non-porous surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAP-224-1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e2-hole AMPS, 48.6 mm (1.912\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003e2× #10 × 3\/4\" sheet metal screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.09 kg (0.20 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock suction cup base, 2 sheet metal screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eReplacing worn suction cups across a vehicle fleet, or building your own windscreen mounts? As an Official RAM Mounts Reseller we supply Twist-Lock bases singly or in volume.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188830200074,"sku":"ram2241u","price":22.27,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAP-224-1U_1.jpg?v=1792007203"},{"product_id":"ram-mounts-tough-tray-ii-spring-loaded-netbook-tablet-holder-ram-234-6","title":"RAM Mounts Tough-Tray II Spring-Loaded Holder for Tablets and Netbooks, 8.56\"–11.2\" Wide (RAM-234-6)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Tough-Tray II\u003c\/strong\u003e (RAM-234-6) is the compact member of the Tough-Tray family, sized for tablets, UMPCs and small laptops rather than full-size notebooks. The spring-loaded tray adjusts from 217 to 284 mm (8.56\"–11.2\") wide, and its retaining arms hold a compact laptop firmly with the screen open or folded. With AMPS 4-hole, AMPS 2-hole and VESA 75 × 75 patterns, it fits a wide range of RAM mounts for cars and boats.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-234-6\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTough-Tray II\u003c\/strong\u003e – spring-loaded tray with adjustable retaining arms\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTray assembly hardware\u003c\/strong\u003e – for fitting the retaining arms\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 × 5\/8\" machine screws, 4× #8-32 nyloc nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 For a ready-to-fit vehicle set, RAM pairs this tray with a Pod I mount in \u003ca href=\"\/en\/products\/ram-mounts-pod-i-floor-mount-with-tough-tray-ii-netbook-tablet-holder-c-size-ram-316-1-234-6u\"\u003eRAM-316-1-234-6U\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for compact devices\u003c\/strong\u003e – width 217–284 mm (8.56\"–11.2\"), tray depth 152 mm (6\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes cased tablets\u003c\/strong\u003e – side arms clamp devices up to 69.9 mm (2.75\") high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen up or down\u003c\/strong\u003e – a compact laptop stays held whether the lid is open or closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts stay usable\u003c\/strong\u003e – the retaining arms adjust to sit clear of ports and buttons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree mounting patterns\u003c\/strong\u003e – AMPS 4-hole (30 × 38 mm), AMPS 2-hole and VESA 75 × 75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTablets, UMPCs and compact laptops 217–284 mm (8.56\"–11.2\") wide\u003c\/li\u003e\n\u003cli\u003eListed by RAM (with case): Apple iPad Pro 12.9\" 1st–6th generation\u003c\/li\u003e\n\u003cli\u003eRAM bases and arms with the AMPS 4-hole (30 × 38 mm), AMPS 2-hole or VESA 75 × 75 mm pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-234-6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth Range\u003c\/th\u003e\n\u003ctd\u003e217–284 mm (8.56\"–11.2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Arm Clamp Height\u003c\/th\u003e\n\u003ctd\u003eUp to 69.9 mm (2.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Depth\u003c\/th\u003e\n\u003ctd\u003e152 mm (6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Thickness\u003c\/th\u003e\n\u003ctd\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm; AMPS 2-hole; VESA 75 × 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.52 kg (1.15 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTough-Tray II, tray assembly hardware, 4 machine screws, 4 nyloc nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eEquipping a boat crew or a car fleet with compact tablets? As an Official RAM Mounts Reseller we match the tray to your devices and the base to each vehicle or console.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188830363914,"sku":"ram2346","price":61.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-234-6_1.jpg?v=1792001988"},{"product_id":"ram-mounts-tough-tray-iii-spring-loaded-laptop-tray-lockable-ram-234-7","title":"RAM Mounts Tough-Tray III Locking Spring-Loaded Laptop Tray for Laptops up to 17\" (RAM-234-7)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Tough-Tray III\u003c\/strong\u003e (RAM-234-7) is the third generation of RAM's laptop tray, and it locks: an integrated tubular cam lock with two keys holds the laptop in place. The cradle springs open from 254 to 387 mm (10\"–15.25\") wide and takes slim or rugged laptops up to 17\" diagonal. Smaller, easier to assemble and more adjustable than earlier Tough-Trays, it is aimed at mobile workstations in fleet vehicles, boats and off-road machines.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-234-7\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTough-Tray III laptop tray\u003c\/strong\u003e – with integrated tubular cam lock\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eSide supports\u003c\/strong\u003e – two interchangeable lengths: long for rugged laptops, short for slim ones\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eKeys\u003c\/strong\u003e – 2 keys for the cam lock\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #10-24 × 3\/4\" machine screws, 4× #10-24 nyloc nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Complete the workstation with the RAM Power Caddy (RAM-234-5U) for the power supply and the Adjustable Laptop Screen Support (RAM-234-S2U), which stows in the tray's own recess.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocks the laptop in\u003c\/strong\u003e – an integrated tubular cam lock holds the laptop in the tray; 2 keys supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim or rugged\u003c\/strong\u003e – side supports fit laptops 0–47.6 mm (0\"–1.875\") thick, with long and short supports to swap in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable depth\u003c\/strong\u003e – swivelling rear supports cover laptop depths of 194–270 mm (7.625\"–10.625\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKind to the device\u003c\/strong\u003e – foam-padded side supports slide sideways to keep ports clear and soak up vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for add-ons\u003c\/strong\u003e – 2-hole AMPS points around the edge for printers, handhelds or scanners; recess for the screen support; Power Caddy compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaptops up to 17\" diagonal: 254–387 mm (10\"–15.25\") wide, 194–270 mm (7.625\"–10.625\") deep, up to 47.6 mm (1.875\") thick\u003c\/li\u003e\n\u003cli\u003eRAM Adjustable Laptop Screen Support and RAM Power Caddy\u003c\/li\u003e\n\u003cli\u003eAccessories with the 2-hole AMPS pattern on the tray perimeter\u003c\/li\u003e\n\u003cli\u003eRAM bases and pedestals with the AMPS 4-hole pattern (30 × 38 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-234-7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth Range\u003c\/th\u003e\n\u003ctd\u003e254–387 mm (10\"–15.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLaptop Size\u003c\/th\u003e\n\u003ctd\u003eUp to 17\" diagonal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLaptop Thickness\u003c\/th\u003e\n\u003ctd\u003e0–47.6 mm (0\"–1.875\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Range\u003c\/th\u003e\n\u003ctd\u003e194–270 mm (7.625\"–10.625\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Thickness\u003c\/th\u003e\n\u003ctd\u003e32 mm (1.26\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eTubular cam lock, 2 keys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm; 2-hole AMPS accessory points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.13 kg (2.48 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTough-Tray III, long and short side supports, 2 keys, mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eBuilding mobile workstations for service vehicles or work boats? As an Official RAM Mounts Reseller we supply the locking tray with power and mounting parts and quote the whole programme.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188830396682,"sku":"ram2347","price":150.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-234-7_1.jpg?v=1792001997"},{"product_id":"ram-mounts-stubby-cup-holder-mount-with-double-socket-arm-b-size-medium-rap-b-299-4-201u","title":"RAM Mounts Stubby Cup Holder Mount with Double Socket Arm, B-Size, Medium Arm (RAP-B-299-4-201U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Stubby Cup Holder Mount – Medium Arm\u003c\/strong\u003e (RAP-B-299-4-201U) is the starting point for drivers who already own a RAM holder. It pairs the Stubby base with a 76.2 mm (3\") composite double socket arm; put your holder's B-size ball into the free socket, tighten the knob and the mount is done.\u003c\/p\u003e\n\u003cp\u003eNo holder yet? Add an \u003ca href=\"\/en\/products\/ram-mounts-x-grip-universal-phone-holder-with-b-size-ball-ram-hol-un7bu\"\u003eX-Grip phone holder\u003c\/a\u003e, the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-large-phone-holder-with-b-size-ball-ram-hol-un10bu\"\u003elarge-phone X-Grip\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-holder-for-7-inch-8-inch-tablets-with-b-size-ball-ram-hol-un8bu\"\u003eX-Grip for 7–8\" tablets\u003c\/a\u003e. For AMPS cradles, a \u003ca href=\"\/en\/products\/ram-mounts-round-plate-with-ball-b-size-amps-pattern-ram-b-202u\"\u003eround plate with ball\u003c\/a\u003e goes in the socket.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for your holder\u003c\/strong\u003e – the free end of the arm takes any RAM holder with a B-size ball\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium reach\u003c\/strong\u003e – composite arm, 76.2 mm (3\") socket to socket; 198.9 mm (7.83\") overall height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCup holder installation\u003c\/strong\u003e – the Stubby base wedges into holders of 65.3–88.9 mm (2.57\"–3.5\"), fins trimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoves between vehicles\u003c\/strong\u003e – nothing is screwed in, so it lifts out with the arm attached\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll composite\u003c\/strong\u003e – 0.65 kg (1.43 lb) complete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM holders, cradles and plates with a B-size (25.4 mm \/ 1\") ball\u003c\/li\u003e\n\u003cli\u003eCup holders 65.3–88.9 mm (2.57\"–3.5\") inside diameter in cars, trucks, ATVs, side-by-sides and boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAP-B-299-4-201U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAP-B-299-4U Stubby base, RAP-B-201U composite medium arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCup Holder Fit\u003c\/th\u003e\n\u003ctd\u003eCup holders 65.3–88.9 mm (2.57\"–3.5\") inside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eMedium, 76.2 mm (3\") socket to socket, composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e198.9 mm (7.83\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eCup holder wedge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.65 kg (1.43 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eStubby cup holder base, medium composite arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRe-using RAM holders you already own in new vehicles? As an Official RAM Mounts Reseller we can supply just the base-and-arm sets, so you do not pay for holders twice.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188831805706,"sku":"ram299-1u","price":63.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAP-B-299-4-201U_1.jpg?v=1792007361"},{"product_id":"ram-mounts-stubby-cup-holder-ball-base-b-size-rap-b-299-4u","title":"RAM Mounts Stubby Cup Holder Ball Base, B-Size (RAP-B-299-4U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Stubby Cup Holder Ball Base\u003c\/strong\u003e (RAP-B-299-4U) turns a cup holder into a mounting point without a single screw. The short composite body wedges into holders from 65.3 to 88.9 mm (2.57\"–3.5\") across and has a B-size ball on top, ready for an arm and holder. This is the base on its own – the same one inside every Stubby kit – for anyone who already has the arm and cradle.\u003c\/p\u003e\n\u003cp\u003eAdd a \u003ca href=\"\/en\/products\/ram-mounts-composite-double-socket-arm-b-size-medium-95-mm-rap-b-201u\"\u003emedium composite arm\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-long-152-mm-ram-b-201u-c\"\u003elong arm\u003c\/a\u003e and a holder such as the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-large-phone-holder-with-b-size-ball-ram-hol-un10bu\"\u003eX-Grip Large Phone Holder\u003c\/a\u003e. Complete kits: \u003ca href=\"\/en\/products\/ram-mounts-x-grip-phone-mount-with-stubby-cup-holder-base-b-size-medium-arm-rap-b-299-4-un7u\"\u003ewith X-Grip for phones\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-x-grip-mount-for-7-8-inch-tablets-with-stubby-cup-holder-base-b-size-medium-arm-rap-b-299-4-un8u\"\u003efor 7–8\" tablets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo tools, no drilling\u003c\/strong\u003e – wedges into the cup holder and lifts out again\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits most cup holders\u003c\/strong\u003e – 65.3–88.9 mm (2.57\"–3.5\") inside diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrimmable fins\u003c\/strong\u003e – the flexible support fins can be cut down for a firmer seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile\u003c\/strong\u003e – 124.5 mm (4.9\") overall – RAM's low version of its cup holder base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite shell\u003c\/strong\u003e – high-strength composite, 0.51 kg (1.13 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCars, side-by-sides and boats\u003c\/h2\u003e\n\u003cp\u003eBecause it only sits in the cup holder, the Stubby can move between vehicles or come out when a car is shared. Its flexible support fins can be trimmed for a snug fit in a particular holder. Position the device so it does not cover controls, vents or airbag deployment areas.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCup holders 65.3–88.9 mm (2.57\"–3.5\") inside diameter in cars, trucks, ATVs, side-by-sides and boats\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") double socket arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAP-B-299-4U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCup Holder Fit\u003c\/th\u003e\n\u003ctd\u003eCup holders 65.3–88.9 mm (2.57\"–3.5\") inside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e124.5 mm (4.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eCup holder wedge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.51 kg (1.13 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eStubby cup holder ball base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eNeed temporary mounts for pool cars or shared vehicles where drilling is not allowed? As an Official RAM Mounts Reseller we supply Stubby bases with arms and holders in fleet quantities.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188832362762,"sku":"ram2994u","price":49.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAP-B-299-4U_1.jpg?v=1792007366"},{"product_id":"ram-mounts-pod-hd-30-inch-vehicle-floor-mount-with-round-amps-plate-c-size-ram-316-hd-18-202u","title":"RAM Mounts Pod HD 30\" Vehicle Floor Mount with Round AMPS Plate, C-Size, Medium Arm (RAM-316-HD-18-202U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Pod HD 30\" Vehicle Floor Mount with Round Plate\u003c\/strong\u003e (RAM-316-HD-18-202U) is the taller of the two Pod HD pedestals: with its 18\" aluminium rod it sets the device between 629 and 806 mm (24.75\"–31.75\") above the floor. It bolts to the seat rail without drilling and ends in a round AMPS plate, so you add the tablet cradle, keyboard tray or dock of your choice. Pick it for vans, trucks and SUVs with higher seating.\u003c\/p\u003e\n\u003cp\u003eLock the arm with the \u003ca href=\"\/en\/products\/ram-mounts-key-lock-knob-with-brass-insert-for-c-size-socket-arms-ram-knob5lu\"\u003eC-size key lock knob\u003c\/a\u003e, or bring the screen further out with the \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-long-232-mm-ram-201u-d\"\u003elong C-size arm\u003c\/a\u003e. For VESA monitors, add the \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-c-size-ram-2461u\"\u003eC-size VESA 75 plate\u003c\/a\u003e. In a lower cab, the \u003ca href=\"\/en\/products\/ram-mounts-pod-hd-24-inch-vehicle-floor-mount-with-round-amps-plate-c-size-ram-316-hd-202u\"\u003e24\" Pod HD\u003c\/a\u003e is the better fit.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaller 30\" version\u003c\/strong\u003e – height range 629–806 mm (24.75\"–31.75\") for higher cabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits without drilling\u003c\/strong\u003e – attaches to the seat rail; stabiliser foot included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod removes without tools\u003c\/strong\u003e – take the pipe out when a vehicle is sold or reassigned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMPS round plate\u003c\/strong\u003e – 4-hole 30 × 38 mm and 3-hole 120° Ø 46 mm patterns take most RAM holders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-size arm\u003c\/strong\u003e – medium arm, 118 mm (4.66\") socket to socket, rated 1.8 kg (4 lb) standard use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFor mixed fleets\u003c\/h2\u003e\n\u003cp\u003eOne Pod HD fits a wide range of cars and trucks, which keeps a mixed fleet on a single mount. The rod comes out without tools when the vehicle changes hands, and the stabiliser foot steadies the base on the floor. Position the device outside airbag deployment zones.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCars and trucks – attaches to the seat rail without drilling\u003c\/li\u003e\n\u003cli\u003eHolders, trays and docks with AMPS 4-hole (30 × 38 mm) or 3-hole 120° (Ø 46 mm) patterns\u003c\/li\u003e\n\u003cli\u003eAll RAM C-size (38.1 mm \/ 1.5\") arms and ball parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-316-HD-18-202U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-316-HD-18-NBU Pod HD 30\" mount with double socket arm, RAM-202U round plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight Range\u003c\/th\u003e\n\u003ctd\u003e629–806 mm (24.75\"–31.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePipe Diameter\u003c\/th\u003e\n\u003ctd\u003e21.3 mm (0.84\") OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eC, 38.1 mm (1.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eMedium, 118 mm (4.66\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e1.8 kg (4 lb) standard use; 1.36 kg (3 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated steel, marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eFloor mount, seat rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.39 kg (5.26 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003ePod HD 30\" base with rod and arm, round plate, stabiliser foot, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eStandardising tablet mounts across vans, pickups and trucks? We are an Official RAM Mounts Reseller and can deliver Pod HD bases together with the cradles for each device type.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188832395530,"sku":"ram316hd18202u","price":320.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-316-HD-18-202U_1.jpg?v=1792002137"},{"product_id":"ram-mounts-pod-hd-24-inch-vehicle-floor-mount-with-round-amps-plate-c-size-ram-316-hd-202u","title":"RAM Mounts Pod HD 24\" Vehicle Floor Mount with Round AMPS Plate, C-Size, Medium Arm (RAM-316-HD-202U)","description":"\u003cp\u003eCompact cabs are where \u003cstrong\u003eRAM Mounts Pod HD 24\" Floor Mount\u003c\/strong\u003e (RAM-316-HD-202U) earns its place. With a 12\" aluminium rod it holds the plate 476–654 mm (18.75\"–25.75\") above the floor – low enough for passenger cars and small vans, where the 30\" version would put the screen too high. You choose the holder: the round plate takes any RAM cradle with an AMPS pattern.\u003c\/p\u003e\n\u003cp\u003eFor a keyed installation, fit the \u003ca href=\"\/en\/products\/ram-mounts-key-lock-knob-with-brass-insert-for-c-size-socket-arms-ram-knob5lu\"\u003eC-size key lock knob\u003c\/a\u003e. A \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-short-90-mm-ram-201u-b\"\u003eshort C-size arm\u003c\/a\u003e brings the device closer to the rod, a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-long-232-mm-ram-201u-d\"\u003elong one\u003c\/a\u003e adds reach. Taller cabs suit the \u003ca href=\"\/en\/products\/ram-mounts-pod-hd-30-inch-vehicle-floor-mount-with-round-amps-plate-c-size-ram-316-hd-18-202u\"\u003e30\" Pod HD\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower 24\" height\u003c\/strong\u003e – 476–654 mm (18.75\"–25.75\") from the floor, sized for cars and small vans\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat rail installation\u003c\/strong\u003e – no holes in the floor or dash; a stabiliser foot is included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable rod\u003c\/strong\u003e – the pipe lifts out without tools, so the mount moves with the vehicle's next user\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree separate parts\u003c\/strong\u003e – Pod HD base with 12\" rod and ball, RAM-201U medium arm and RAM-202U round plate – each replaceable on its own\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-size ball system\u003c\/strong\u003e – 38.1 mm (1.5\") balls, 118 mm (4.66\") arm, 1.8 kg (4 lb) standard-use rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCars and small vans – attaches to the seat rail without drilling\u003c\/li\u003e\n\u003cli\u003eRAM holders and trays with AMPS 4-hole (30 × 38 mm) or 3-hole 120° (Ø 46 mm) patterns\u003c\/li\u003e\n\u003cli\u003eAll RAM C-size (38.1 mm \/ 1.5\") arms and plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-316-HD-202U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-316-HD-NABU Pod HD base with 12\" rod and ball, RAM-201U arm, RAM-202U round plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight Range\u003c\/th\u003e\n\u003ctd\u003e476–654 mm (18.75\"–25.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePipe Diameter\u003c\/th\u003e\n\u003ctd\u003e21.3 mm (0.84\") OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eC, 38.1 mm (1.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eMedium, 118 mm (4.66\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e1.8 kg (4 lb) standard use; 1.36 kg (3 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated steel, marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eFloor mount, seat rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.30 kg (5.08 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003ePod HD 24\" base with rod, medium C-size arm, round plate, stabiliser foot, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eEquipping pool cars or sales vehicles with tablets? Talk to us – as an Official RAM Mounts Reseller we match the Pod HD height to each model and supply the holders with it.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188832461066,"sku":"ram316hd202u","price":308.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-316-HD-202U_1.jpg?v=1792002145"},{"product_id":"ram-mounts-twist-lock-suction-cup-mount-with-round-amps-plate-b-size-medium-arm-ram-b-166-202u","title":"RAM Mounts Twist-Lock Suction Cup Mount with Round AMPS Plate, B-Size, Medium Arm (RAM-B-166-202U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Twist-Lock Suction Mount with Round Plate, Medium Arm\u003c\/strong\u003e (RAM-B-166-202U) is the windscreen mount RAM builds many of its own kits on – Tab-Tite and X-Grip tablet mounts and the \u003ca href=\"\/en\/products\/ram-mounts-ez-roll-r-suction-cup-mount-for-ipad-pro-11-inch-ipad-air-11-inch-b-size-medium-arm-ram-b-166-ap23u\"\u003eiPad Pro 11\" suction mount\u003c\/a\u003e all start from it. Bought on its own, it is a universal base for any cradle with the AMPS 4-hole or 3-hole 120° pattern. Its 76 mm arm is the middle of three lengths.\u003c\/p\u003e\n\u003cp\u003eDifferent reach needed? The arm swaps for the \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-short-61-mm-ram-b-201u-a\"\u003eshort\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-long-152-mm-ram-b-201u-c\"\u003elong B-size arm\u003c\/a\u003e. Spare \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-base-with-ball-b-size-aluminium-ram-b-224-1u\"\u003eTwist-Lock suction bases\u003c\/a\u003e let one cradle move between several vehicles.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocks on with a twist\u003c\/strong\u003e – the Ø 83.8 mm (3.3\") Twist-Lock cup holds on glass and non-porous plastic, including RAM adhesive discs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo hole patterns on one plate\u003c\/strong\u003e – the Ø 63.5 mm (2.5\") round plate has AMPS 4-hole (30 × 38 mm) and 3-hole 120° (Ø 46 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMiddle arm length\u003c\/strong\u003e – 76 mm (3\") socket to socket, about 170 mm (6.69\") overall height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for tablets and handhelds\u003c\/strong\u003e – 0.9 kg (2 lb) in standard use, 0.45 kg (1 lb) in heavy-duty use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable build\u003c\/strong\u003e – powder-coated marine-grade aluminium arm and plate with a high-strength composite suction base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIn the vehicle\u003c\/h2\u003e\n\u003cp\u003ePress the cup onto clean glass and turn the lever to lock it; turning it back releases the mount without tools, so a device can come out of the vehicle at the end of a shift. Place it where it does not block the driver's view and never in an airbag deployment zone.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM and third-party cradles with AMPS 4-hole (30 × 38 mm) or 3-hole 120° (Ø 46 mm) patterns\u003c\/li\u003e\n\u003cli\u003eWindscreens and other smooth, non-porous surfaces; RAM adhesive discs\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") arms and balls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-166-202U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-B-224-1U suction cup base, RAM-B-201U arm, RAM-B-202U round plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eMedium, 76 mm (3\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate\u003c\/th\u003e\n\u003ctd\u003eØ 63.5 mm (2.5\") round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e170 mm (6.69\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, high-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.32 kg (0.7 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eSuction cup base, medium arm, round plate, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eStandardising tablet or terminal mounts across a car or van fleet? As an Official RAM Mounts Reseller we supply this base in volume for repeat rollouts and quote project pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188834361610,"sku":"ramarm1","price":64.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-166-202U_1.jpg?v=1792002243"},{"product_id":"ram-mounts-twist-lock-suction-cup-mount-with-round-amps-plate-b-size-long-arm-ram-b-166-c-202u","title":"RAM Mounts Twist-Lock Suction Cup Mount with Round AMPS Plate, B-Size, Long Arm (RAM-B-166-C-202U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Long-Arm Twist-Lock Suction Mount\u003c\/strong\u003e (RAM-B-166-C-202U) is for windscreens that sit far from the user – a deep truck dashboard, a boat console screen or an aircraft windshield. Its 135 mm (5.31\") arm brings the round AMPS plate about 229 mm (9\") out from the glass, almost 6 cm further than the medium version.\u003c\/p\u003e\n\u003cp\u003eToo much reach? The \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-medium-95-mm-ram-b-201u\"\u003emedium B-size arm\u003c\/a\u003e drops straight in. For a lighter build with the same long aluminium arm, ask for RAP-B-166-C-202U.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong reach\u003c\/strong\u003e – 135 mm (5.31\") socket to socket, about 229 mm (9\") overall height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free suction\u003c\/strong\u003e – Ø 83.8 mm (3.3\") Twist-Lock cup for glass and non-porous plastic, also RAM adhesive discs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal plate\u003c\/strong\u003e – Ø 63.5 mm (2.5\") round plate with AMPS 4-hole (30 × 38 mm) and 3-hole 120° (Ø 46 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e – 0.9 kg (2 lb) in standard use; 0.45 kg (1 lb) in heavy-duty use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-ready materials\u003c\/strong\u003e – powder-coated marine-grade aluminium and high-strength composite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eReaching the pilot or driver\u003c\/h2\u003e\n\u003cp\u003eThe extra length lets a tablet or GPS cradle come back towards the seat instead of sitting against distant glass, and both ball joints still allow full tilt and swivel. In aircraft, follow the aircraft's and aviation authority's rules on what may be fixed to the windshield; in road vehicles keep the mount clear of airbag zones.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCradles with AMPS 4-hole (30 × 38 mm) or 3-hole 120° (Ø 46 mm) patterns\u003c\/li\u003e\n\u003cli\u003eCar, truck, boat and aircraft windscreens; other smooth, non-porous surfaces\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") arms and balls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-166-C-202U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-B-224-1U suction cup base, RAM-B-201U-C arm, RAM-B-202U round plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eLong, 135 mm (5.31\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate\u003c\/th\u003e\n\u003ctd\u003eØ 63.5 mm (2.5\") round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e229 mm (9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, high-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.41 kg (0.9 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eSuction cup base, long arm, round plate, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMounting devices in trucks, coaches or aircraft where the glass is a long way off? As an Official RAM Mounts Reseller we supply long-arm suction kits in quantity and quote project prices.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188834918666,"sku":"ramb166c202u","price":78.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-166-C-202U_1.jpg?v=1792002249"},{"product_id":"ram-mounts-twist-lock-suction-cup-mount-with-diamond-plate-b-size-medium-arm-ram-b-166u","title":"RAM Mounts Twist-Lock Suction Cup Double Ball Mount with Diamond Plate, B-Size, Medium Arm (RAM-B-166U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Twist-Lock Suction Cup Double Ball Mount\u003c\/strong\u003e (RAM-B-166U) is the standard no-drill base-and-arm set for a windscreen: an 83.8 mm suction cup, a 76 mm aluminium double socket arm and a diamond plate with the 2-hole AMPS pattern. Screw a RAM cradle or holder with that pattern to the plate and the windscreen mount is complete. Of the five versions in this family, this is the all-round choice – aluminium, medium reach – with long and composite alternatives alongside.\u003c\/p\u003e\n\u003cp\u003eWant it lighter and rust-free for a boat? Take the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-composite-suction-cup-double-ball-mount-b-size-medium-rap-b-166u\"\u003ecomposite version\u003c\/a\u003e. More distance from the glass comes with the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-mount-with-diamond-plate-b-size-long-arm-ram-b-166u-c\"\u003elong-arm version\u003c\/a\u003e, and holders with a 4-hole AMPS back match the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-mount-with-round-amps-plate-b-size-medium-arm-ram-b-166-202u\"\u003eround-plate version\u003c\/a\u003e better.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits without tools\u003c\/strong\u003e – the Ø 83.8 mm (3.3\") Twist-Lock cup grips windscreens, gloss panels and RAM adhesive disks – no holes in the vehicle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for most RAM cradles\u003c\/strong\u003e – the 61.7 × 33.3 mm diamond plate has the 2-hole AMPS pattern, holes 48.6 mm (1.912\") apart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium reach\u003c\/strong\u003e – 76 mm (3\") between the arm's sockets; the assembled mount stands about 170 mm (6.69\") tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjusts at both ends\u003c\/strong\u003e – B-size 25.4 mm (1\") rubber balls at the cup and the plate let you tilt and turn the device, while the rubber takes the edge off vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium arm and plate\u003c\/strong\u003e – marine-grade aluminium with composite parts; 0.9 kg (2 lb) load in standard use, 0.45 kg (1 lb) in heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWindscreens in cars, boats and aircraft\u003c\/h2\u003e\n\u003cp\u003eRAM lists this mount for the windshields of cars and trucks, boats, ATVs and side-by-sides, and aircraft. The cup holds on glass and smooth, non-porous plastic; where a panel is textured, a RAM adhesive disk gives it a smooth surface to grip. Pilots should follow the aircraft's and the aviation authority's rules on windshield-mounted equipment, and drivers should keep the mount and device clear of airbag deployment zones.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM cradles, holders and docks with the 2-hole AMPS pattern (48.6 mm \/ 1.912\")\u003c\/li\u003e\n\u003cli\u003eRAM B-size (25.4 mm \/ 1\") holders with ball, fitted in the arm socket instead of the diamond plate\u003c\/li\u003e\n\u003cli\u003eGlass and other smooth, non-porous surfaces, including RAM adhesive disks\u003c\/li\u003e\n\u003cli\u003eListed by RAM for car, truck, boat, ATV\/side-by-side and aircraft windshields\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-166U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-B-224-1U Twist-Lock suction cup base, RAM-B-201U medium arm, RAM-B-238U diamond base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eMedium, 76 mm (3\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate Size\u003c\/th\u003e\n\u003ctd\u003e61.7 × 33.3 mm (2.43\" × 1.31\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e2-hole AMPS, 48.6 mm (1.912\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e170 mm (6.69\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, high-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.32 kg (0.71 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eSuction cup base, medium double socket arm, diamond base, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003ePutting the same windscreen mount into every car, truck or work boat in a fleet? As an Official RAM Mounts Reseller we supply this base-and-arm set together with the cradles that go on it and quote volume pricing for the rollout.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188834951434,"sku":"ramb166u","price":63.51,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-166U_1.jpg?v=1792002296"},{"product_id":"ram-mounts-twist-lock-composite-suction-cup-double-ball-mount-b-size-medium-rap-b-166u","title":"RAM Mounts Twist-Lock Composite Suction Cup Double Ball Mount, B-Size, Medium Arm (RAP-B-166U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Composite Twist-Lock Suction Cup Double Ball Mount\u003c\/strong\u003e (RAP-B-166U) builds the cup base, the 76 mm arm and the diamond plate from high-strength composite. That makes it the lighter alternative to the aluminium RAM-B-166U – 0.26 kg against 0.32 kg – and with no metal arm or plate to corrode, a natural fit for boat windscreens. The load rating stays the same.\u003c\/p\u003e\n\u003cp\u003eNeed a different reach? The \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-composite-suction-cup-double-ball-mount-b-size-long-arm-rap-b-166u-c\"\u003elong version\u003c\/a\u003e has a 135 mm arm, the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-composite-suction-cup-double-ball-mount-b-size-short-rap-b-166u-a\"\u003eshort version\u003c\/a\u003e a 44.5 mm arm. Prefer metal? See the aluminium \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-mount-with-diamond-plate-b-size-medium-arm-ram-b-166u\"\u003eRAM-B-166U\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight and corrosion-free\u003c\/strong\u003e – high-strength composite cup base, arm and plate; the assembled mount weighs 0.26 kg (0.57 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock suction cup\u003c\/strong\u003e – Ø 83.8 mm (3.3\") for glass, smooth non-porous plastic and RAM adhesive disks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes RAM cradles\u003c\/strong\u003e – the composite diamond plate carries the 2-hole AMPS pattern, 48.6 mm (1.912\") between holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium arm\u003c\/strong\u003e – 76 mm (3\") socket to socket; overall height about 171 mm (6.75\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame load as aluminium\u003c\/strong\u003e – 0.9 kg (2 lb) in standard use and 0.45 kg (1 lb) in heavy-duty use on B-size 25.4 mm (1\") balls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOn the water and in the air\u003c\/h2\u003e\n\u003cp\u003eRAM lists this mount for boat, car and truck, ATV\/side-by-side and aircraft windshields. Composite parts shrug off spray and damp air, and the Twist-Lock cup comes off the glass when the boat or aircraft is laid up. Pilots should check their aircraft's and authority's rules before fitting equipment to a windshield; in road vehicles, keep it away from airbag deployment zones.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM cradles and holders with the 2-hole AMPS pattern (48.6 mm \/ 1.912\")\u003c\/li\u003e\n\u003cli\u003eRAM B-size (25.4 mm \/ 1\") holders with ball, in place of the diamond plate\u003c\/li\u003e\n\u003cli\u003eGlass and smooth, non-porous surfaces, including RAM adhesive disks\u003c\/li\u003e\n\u003cli\u003eListed by RAM for boat, car\/truck, ATV\/side-by-side and aircraft windshields\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAP-B-166U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAP-B-224-1U composite Twist-Lock suction cup base, RAP-B-201U composite medium arm, RAP-B-238U composite diamond base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eMedium, 76 mm (3\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate Size\u003c\/th\u003e\n\u003ctd\u003e61.7 × 33.3 mm (2.43\" × 1.31\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e2-hole AMPS, 48.6 mm (1.912\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e171 mm (6.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.26 kg (0.57 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eComposite suction cup base, composite medium arm, composite diamond base, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eFitting out a charter fleet or a sailing club's support boats? As an Official RAM Mounts Reseller we supply composite and aluminium windscreen mounts side by side, so every boat gets the right one, and we quote volume pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188834984202,"sku":"ramb166u-2","price":50.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAP-B-166U_1.jpg?v=1792007314"},{"product_id":"ram-mounts-twist-lock-composite-suction-cup-double-ball-mount-b-size-short-rap-b-166u-a","title":"RAM Mounts Twist-Lock Composite Suction Cup Double Ball Mount, B-Size, Short Arm (RAP-B-166U-A)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Short Composite Twist-Lock Suction Mount\u003c\/strong\u003e (RAP-B-166U-A) keeps the device tight to the glass. With a 44.5 mm arm – the shortest in the family – a phone, GPS or small cradle sits close to the windscreen, and the all-composite set weighs just 0.20 kg. It is the one to pick when the screen is already within easy reach and you want as little overhang as possible.\u003c\/p\u003e\n\u003cp\u003eIf the device needs to come further towards you, the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-composite-suction-cup-double-ball-mount-b-size-medium-rap-b-166u\"\u003emedium composite version\u003c\/a\u003e has a 76 mm arm and the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-composite-suction-cup-double-ball-mount-b-size-long-arm-rap-b-166u-c\"\u003elong version\u003c\/a\u003e a 135 mm arm.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSits close to the glass\u003c\/strong\u003e – 44.5 mm (1.75\") socket to socket – the shortest arm among the Twist-Lock double ball mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightest of the family\u003c\/strong\u003e – all high-strength composite, 0.20 kg (0.43 lb) assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock suction cup\u003c\/strong\u003e – Ø 83.8 mm (3.3\"), for glass, smooth non-porous plastic and RAM adhesive disks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-hole AMPS plate\u003c\/strong\u003e – composite diamond plate with holes 48.6 mm (1.912\") apart for RAM cradles and holders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB-size ball and socket\u003c\/strong\u003e – 25.4 mm (1\") rubber balls; 0.9 kg (2 lb) standard and 0.45 kg (1 lb) heavy-duty load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWindscreens on ATVs, boats and aircraft\u003c\/h2\u003e\n\u003cp\u003eRAM lists this mount for ATV and side-by-side, boat, car\/truck and aircraft windshields. A short arm leaves little leverage on the cup, which suits vehicles that bounce. In an aircraft, follow the aircraft's and aviation authority's rules for windshield-mounted equipment; in road vehicles, keep it out of airbag deployment zones.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM cradles and holders with the 2-hole AMPS pattern (48.6 mm \/ 1.912\")\u003c\/li\u003e\n\u003cli\u003eRAM B-size (25.4 mm \/ 1\") holders with ball, in place of the diamond plate\u003c\/li\u003e\n\u003cli\u003eGlass and smooth, non-porous surfaces, including RAM adhesive disks\u003c\/li\u003e\n\u003cli\u003eListed by RAM for ATV\/side-by-side, boat, car\/truck and aircraft windshields\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAP-B-166U-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAP-B-224-1U composite Twist-Lock suction cup base, RAP-B-201U-A composite short arm, RAP-B-238U composite diamond base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eShort, 44.5 mm (1.75\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e2-hole AMPS, 48.6 mm (1.912\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.20 kg (0.43 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eComposite suction cup base, composite short arm, composite diamond base, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eEquipping a group of ATVs and side-by-sides, or a few small boats, with compact windscreen mounts? Talk to us – we are an Official RAM Mounts Reseller and quote quantity pricing on complete mounts and spare parts.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188835016970,"sku":"ramb166ua","price":47.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAP-B-166U-A_1.jpg?v=1792007310"},{"product_id":"ram-mounts-twist-lock-suction-cup-mount-with-diamond-plate-b-size-long-arm-ram-b-166u-c","title":"RAM Mounts Twist-Lock Suction Cup Double Ball Mount with Diamond Plate, B-Size, Long Arm (RAM-B-166U-C)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Long-Arm Twist-Lock Suction Cup Mount\u003c\/strong\u003e (RAM-B-166U-C) is meant for windscreens that sit a long way from the person reading the device – deep dashboards, raked boat screens, wide truck cabs. Its 135 mm aluminium arm gives almost twice the reach of the medium RAM-B-166U, and the diamond plate on the end takes any RAM cradle with the 2-hole AMPS pattern.\u003c\/p\u003e\n\u003cp\u003eIf the screen is closer to you, the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-mount-with-diamond-plate-b-size-medium-arm-ram-b-166u\"\u003emedium-arm version\u003c\/a\u003e is 59 mm more compact. The same long arm with a composite cup and plate is the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-composite-suction-cup-double-ball-mount-b-size-long-arm-rap-b-166u-c\"\u003ecomposite long version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra reach\u003c\/strong\u003e – 135 mm (5.31\") socket to socket; the assembled mount stands about 229 mm (9\") tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock suction cup\u003c\/strong\u003e – Ø 83.8 mm (3.3\") cup for glass, smooth non-porous plastic and RAM adhesive disks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard cradle interface\u003c\/strong\u003e – 61.7 × 33.3 mm diamond plate with the 2-hole AMPS pattern, holes 48.6 mm (1.912\") apart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo adjustment points\u003c\/strong\u003e – B-size 25.4 mm (1\") rubber balls at the cup and the plate, clamped by the knob on the arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium long arm\u003c\/strong\u003e – marine-grade aluminium arm and plate; 0.9 kg (2 lb) standard and 0.45 kg (1 lb) heavy-duty load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eReaching back from the glass\u003c\/h2\u003e\n\u003cp\u003eRAM lists the mount for car, truck, boat, ATV\/side-by-side and aircraft windshields. A long arm acts as a longer lever on the cup, so on rough water or terrain keep the device within the 0.45 kg (1 lb) heavy-duty rating. In aircraft, follow the aircraft's and authority's rules on windshield-mounted equipment; in road vehicles, keep the device out of airbag deployment zones.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM cradles and holders with the 2-hole AMPS pattern (48.6 mm \/ 1.912\")\u003c\/li\u003e\n\u003cli\u003eRAM B-size (25.4 mm \/ 1\") holders with ball, in place of the diamond plate\u003c\/li\u003e\n\u003cli\u003eGlass and smooth, non-porous surfaces, including RAM adhesive disks\u003c\/li\u003e\n\u003cli\u003eListed by RAM for car, truck, boat, ATV\/side-by-side and aircraft windshields\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-166U-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-B-224-1U Twist-Lock suction cup base, RAM-B-201U-C long arm, RAM-B-238U diamond base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eLong, 135 mm (5.31\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate Size\u003c\/th\u003e\n\u003ctd\u003e61.7 × 33.3 mm (2.43\" × 1.31\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e2-hole AMPS, 48.6 mm (1.912\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e229 mm (9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, high-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.40 kg (0.88 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eSuction cup base, long double socket arm, diamond base, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eTrucks, buses or work boats where the windscreen is out of the driver's easy reach? We are an Official RAM Mounts Reseller and can deliver long-arm windscreen mounts for the whole fleet, matched to the cradles you use.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188835049738,"sku":"ramb166uc","price":76.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-166U-C_1.jpg?v=1792002285"},{"product_id":"ram-mounts-x-grip-phone-mount-with-twist-lock-suction-cup-b-size-ram-b-166-un7u","title":"RAM Mounts X-Grip Phone Mount with Twist-Lock Suction Cup, B-Size, Medium Arm (RAM-B-166-UN7U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts X-Grip Phone Mount with Twist-Lock Suction Cup\u003c\/strong\u003e (RAM-B-166-UN7U) puts a standard-size smartphone on a windscreen without a single drilled hole. The four-armed X-Grip closes around phones 47.6–82.6 mm wide, case included, and the 83.8 mm Twist-Lock cup is fixed or released with a twist. This is the aluminium-and-composite kit; owners of Plus, Pro Max or Ultra phones should look at the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-large-phone-mount-with-twist-lock-suction-cup-b-size-medium-arm-ram-b-166-un10u\"\u003elarge X-Grip version\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003eWant the phone further from the glass? Swap in the \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-long-152-mm-ram-b-201u-c\"\u003elong B-size arm\u003c\/a\u003e. To move the holder onto a handlebar or rail, combine it with a \u003ca href=\"\/en\/products\/ram-mounts-tough-claw-small-clamp-base-with-ball-for-15-929-mm-rails-b-size-rap-b-400u\"\u003eTough-Claw small clamp base\u003c\/a\u003e or a \u003ca href=\"\/en\/products\/ram-mounts-handlebar-u-bolt-base-for-12-731-8-mm-rails-b-size-ram-b-231zu\"\u003eU-bolt rail base\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits phones in their case\u003c\/strong\u003e – the X-Grip spreads from 47.6 to 82.6 mm (1.875\"–3.25\") and takes devices up to 22.2 mm (0.875\") deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo drilling\u003c\/strong\u003e – the Ø 83.8 mm (3.3\") Twist-Lock suction cup holds on windscreens, glass and smooth, non-porous plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen and buttons stay free\u003c\/strong\u003e – four rubber-capped arms hold the phone by its edges, so nothing covers the display or the side keys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne knob, two joints\u003c\/strong\u003e – the medium 76 mm (3\") B-size arm locks both ball joints at once, and the rubber balls take up road vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTether included\u003c\/strong\u003e – an optional tether is in the box; RAM recommends it for outdoor and high-vibration use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOn the windscreen\u003c\/h2\u003e\n\u003cp\u003eChoose a spot low on the glass where the phone does not block the view of the road, and keep clear of airbag deployment zones. Clean the glass first; the cup grips glass and smooth, non-porous plastic. When the car changes hands, the whole kit comes off and goes with the driver.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePhones 47.6–82.6 mm (1.875\"–3.25\") wide and up to 22.2 mm (0.875\") deep, measured with their case\u003c\/li\u003e\n\u003cli\u003eListed by RAM: Apple iPhone 8, SE, X, Xs, 12 mini, 13 mini, 15 Pro; Google Pixel 2, 3, 3a, 4, 4a, 5, 8\u003c\/li\u003e\n\u003cli\u003eSamsung Galaxy S8, S9, S10, S10e, S20 5G, S22 5G, S23, S24, S25, A6, A10e, A20e, A40, J2, Z4\u003c\/li\u003e\n\u003cli\u003eSony Xperia XZ1 Compact, XZ2 Compact; LG Q6; Motorola razr; Nokia 1, 8, 3310 Dual SIM, 8110 4G; Xiaomi Mi 9 Explorer\u003c\/li\u003e\n\u003cli\u003eWindscreens and other smooth, non-porous surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-166-UN7U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-HOL-UN7BU X-Grip phone holder, RAM-B-201U arm, RAM-B-224-1U Twist-Lock suction cup base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice Size\u003c\/th\u003e\n\u003ctd\u003eWidth 47.6–82.6 mm (1.875\"–3.25\"); depth up to 22.2 mm (0.875\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eMedium, 76 mm (3\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, high-strength composite, stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.35 kg (0.77 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eX-Grip phone holder, double socket arm, Twist-Lock suction cup base, assembly hardware, optional tether, glue tube for rubber caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHanding out phones to drivers of company cars or service vans? As an Official RAM Mounts Reseller we supply the same suction kit for every vehicle and quote volume pricing for the rollout.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188835115274,"sku":"ramb166un7u","price":100.47,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-166-UN7U_1.jpg?v=1792002255"},{"product_id":"ram-mounts-twist-lock-dual-suction-cup-base-with-amps-plate-ram-b-189bu","title":"RAM Mounts Twist-Lock Dual Suction Cup Base with AMPS Plate (RAM-B-189BU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Twist-Lock Dual Suction Cup Base\u003c\/strong\u003e (RAM-B-189BU) is the bare two-cup platform: a dual adapter plate with the 4-hole AMPS pattern, two Twist-Lock suction cups and the screws to fasten a ball base. Add a B-size round plate and you have the same set-up as \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-dual-suction-cup-base-with-round-ball-plate-b-size-ram-b-189b-202u\"\u003eRAM-B-189B-202U\u003c\/a\u003e; or bolt on another AMPS-drilled RAM base of your choice. RAM recommends it for vehicle windshields and other non-porous surfaces.\u003c\/p\u003e\n\u003cp\u003eFit a \u003ca href=\"\/en\/products\/ram-mounts-round-plate-with-ball-b-size-amps-pattern-ram-b-202u\"\u003eround plate with B-size ball\u003c\/a\u003e to the AMPS holes, then add a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-medium-95-mm-ram-b-201u\"\u003emedium B-size arm\u003c\/a\u003e and a holder.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-hole AMPS plate\u003c\/strong\u003e – 30 × 38 mm (1.181\" × 1.496\") pattern for RAM round plates and other AMPS bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrews included\u003c\/strong\u003e – 4× #8-32 × 1\/2\" machine screws and 4 thin nyloc nuts to fix the ball base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Twist-Lock cups\u003c\/strong\u003e – Ø 83.8 mm (3.3\") each, 202 mm (7.95\") across the pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel and composite\u003c\/strong\u003e – powder-coated steel plate with high-strength composite cups; 0.31 kg (0.69 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOn windshields\u003c\/h2\u003e\n\u003cp\u003eRAM lists the base for aircraft and vehicle windshields. In a car or truck, fit it outside airbag deployment zones and away from the driver's view of the road. In aircraft, follow the aircraft's and aviation authority's rules for windshield-mounted equipment.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM ball bases and plates with the AMPS 4-hole pattern (30 × 38 mm), e.g. the B-size round plate\u003c\/li\u003e\n\u003cli\u003eVehicle and aircraft windshields and other smooth, non-porous surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-189BU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-B-189BPU dual adapter plate, RAP-224-1U Twist-Lock suction cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cups\u003c\/th\u003e\n\u003ctd\u003e2× Twist-Lock, Ø 83.8 mm (3.3\") each; total width 202 mm (7.95\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated steel, high-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.31 kg (0.69 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eDual adapter plate, 2 Twist-Lock suction cups, 4 machine screws, 4 nyloc nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eKeeping spare windshield bases for a vehicle or aircraft fleet? As an Official RAM Mounts Reseller we quote volume pricing on bases and the ball plates that go with them.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188835180810,"sku":"ramb189bu","price":52.13,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-189BU_1.jpg?v=1792002306"},{"product_id":"ram-mounts-double-socket-arm-b-size-medium-95-mm-ram-b-201u","title":"RAM Mounts Double Socket Arm, B-Size, Medium Arm 76 mm (RAM-B-201U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Double Socket Arm, B-Size Medium\u003c\/strong\u003e (RAM-B-201U) is the arm most RAM phone, GPS and small-tablet mounts are built around. It grips a 25.4 mm (1\") rubber ball at each end – one on the base, one on the holder – and the T-knob in the middle sets both joints in one turn. At 76 mm (3\") socket to socket it sits between the \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-short-61-mm-ram-b-201u-a\"\u003eshort\u003c\/a\u003e and \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-long-152-mm-ram-b-201u-c\"\u003elong\u003c\/a\u003e arms, which makes it the spare to keep on the shelf for any B-size installation.\u003c\/p\u003e\n\u003cp\u003eStarting from scratch? Combine it with a \u003ca href=\"\/en\/products\/ram-mounts-round-plate-with-ball-b-size-amps-pattern-ram-b-202u\"\u003eround B-size ball plate\u003c\/a\u003e or a \u003ca href=\"\/en\/products\/ram-mounts-diamond-ball-base-with-2-hole-amps-pattern-b-size-ram-b-238u\"\u003ediamond ball base\u003c\/a\u003e and a holder such as the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-universal-phone-holder-with-b-size-ball-ram-hol-un7bu\"\u003eX-Grip phone holder\u003c\/a\u003e. Prefer a lighter, rust-free arm? See the \u003ca href=\"\/en\/products\/ram-mounts-composite-double-socket-arm-b-size-medium-95-mm-rap-b-201u\"\u003ecomposite medium arm\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe standard reach\u003c\/strong\u003e – 76 mm (3\") between socket centres and 94.7 mm (3.73\") end to end – enough to angle a screen towards the driver without the leverage of a long arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne knob, two joints\u003c\/strong\u003e – tightening the T-knob clamps both balls; loosening it lets the internal spring open the arm so each end can be turned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes any B-size ball\u003c\/strong\u003e – works with every RAM 1\" ball base, holder and adapter, from X-Grip cradles to suction cups and rail clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-coated aluminium\u003c\/strong\u003e – marine-grade aluminium body for cars, trucks and motorcycles that see weather and constant vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for small devices\u003c\/strong\u003e – 0.9 kg (2 lb) in standard use and 0.45 kg (1 lb) in heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") ball bases, holders and adapters\u003c\/li\u003e\n\u003cli\u003ePhones, GPS units and small tablets within the 0.9 kg standard-use rating\u003c\/li\u003e\n\u003cli\u003eNot for C-size (38.1 mm \/ 1.5\") balls – use a C-size arm such as RAM-201U\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-201U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-B-201U-WD1 arm halves, RAM-B-2-1 T-knob with bolt, washers and spring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eMedium, 76 mm (3\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e94.7 mm (3.73\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.15 kg (0.32 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eMedium B-size double socket arm with T-knob, assembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eKeeping spares for a vehicle fleet or an installation workshop? As an Official RAM Mounts Reseller we stock B-size arms in short, medium and long and quote volume pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188835377418,"sku":"ramb201","price":26.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-201U_1.jpg?v=1792002333"},{"product_id":"ram-mounts-double-socket-arm-b-size-short-61-mm-ram-b-201u-a","title":"RAM Mounts Double Socket Arm, B-Size, Short Arm 44.5 mm (RAM-B-201U-A)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Double Socket Arm, B-Size Short\u003c\/strong\u003e (RAM-B-201U-A) is the most compact arm in RAM's 1\" range, with just 44.5 mm (1.75\") between the sockets and 61.5 mm (2.42\") overall. Keeping the phone or GPS close to its base means less leverage on the joints, so it is the arm to fit on motorcycle handlebars and in vehicles that run on poor roads.\u003c\/p\u003e\n\u003cp\u003eNeed a base? The \u003ca href=\"\/en\/products\/ram-mounts-handlebar-u-bolt-base-for-12-731-8-mm-rails-b-size-ram-b-231zu\"\u003ehandlebar U-bolt base\u003c\/a\u003e fits rails of 12.7–31.8 mm (0.5\"–1.25\"); for flat surfaces use the \u003ca href=\"\/en\/products\/ram-mounts-diamond-ball-base-with-2-hole-amps-pattern-b-size-ram-b-238u\"\u003ediamond ball base\u003c\/a\u003e. Want the same length in composite? See \u003ca href=\"\/en\/products\/ram-mounts-composite-double-socket-arm-b-size-short-61-mm-rap-b-201u-a\"\u003eRAP-B-201U-A\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowest profile B-size arm\u003c\/strong\u003e – 44.5 mm (1.75\") socket to socket and 61.5 mm (2.42\") overall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess sway under vibration\u003c\/strong\u003e – the short lever keeps bounce to a minimum on motorcycles and in vehicles on rough surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in replacement\u003c\/strong\u003e – same B-size sockets as the medium RAM-B-201U, so it swaps into an existing mount when the device should sit closer to its base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium body\u003c\/strong\u003e – powder-coated marine-grade aluminium, 0.10 kg (0.22 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e – 0.9 kg (2 lb) standard use, 0.45 kg (1 lb) heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") ball bases, holders and adapters\u003c\/li\u003e\n\u003cli\u003eUsed in RAM's short-arm kits, e.g. handlebar U-bolt, yoke clamp and strap clamp mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-201U-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eShort, 44.5 mm (1.75\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e61.5 mm (2.42\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNote\u003c\/th\u003e\n\u003ctd\u003eAccording to RAM, the pin spring is not part of this arm's package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.10 kg (0.22 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eShort B-size double socket arm with knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eFitting short, stiff mounts to motorcycles or a mixed vehicle fleet? We are an Official RAM Mounts Reseller and can bundle arms, bases and holders per vehicle.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188835410186,"sku":"ramb201a","price":23.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-201U-A_1.jpg?v=1792002317"},{"product_id":"ram-mounts-ball-adapter-with-qi2-15-w-wireless-charger-for-magsafe-iphones-rap-b-202-ap-mag-1-w2mu","title":"RAM Mounts Ball Adapter with RAM Qi2 15W Wireless Charger for MagSafe iPhone, B-Size (RAP-B-202-AP-MAG-1-W2MU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Qi2 15W Wireless Charger on a B-Size Ball Adapter\u003c\/strong\u003e (RAP-B-202-AP-MAG-1-W2MU) is a complete charging head for a RAM mount: RAM's own Qi2 magnetic charging puck, already seated in the B-size ball adapter. Unlike the adapter-only versions, nothing from Apple is needed – plug the 1 m USB-C cable (USB-A adapter included) into a USB supply, and an iPhone 12 or later aligns on the puck and charges at up to 15 W.\u003c\/p\u003e\n\u003cp\u003eAdd a \u003ca href=\"\/en\/products\/ram-mounts-composite-double-socket-arm-b-size-medium-95-mm-rap-b-201u\"\u003ecomposite B-size arm\u003c\/a\u003e and a base: the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-base-with-ball-b-size-aluminium-ram-b-224-1u\"\u003eTwist-Lock suction cup\u003c\/a\u003e for the windscreen or the \u003ca href=\"\/en\/products\/ram-mounts-drill-down-dashboard-ball-base-with-steel-backing-plate-b-size-ram-b-202-225-2u\"\u003edrill-down base with backing plate\u003c\/a\u003e for the dash. Already own an Apple charger? Take the \u003ca href=\"\/en\/products\/ram-mounts-ball-adapter-for-apple-25w-magsafe-charger-2024-b-size-rap-b-202-ap-mag-1u\"\u003eadapter on its own\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQi2 charging up to 15 W\u003c\/strong\u003e – MPP 15 W for Qi2 phones; BPP 5 W and EPP 7.5 W for other Qi devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic alignment\u003c\/strong\u003e – the magnets centre an iPhone 12 or newer on the charging coil, per RAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible power input\u003c\/strong\u003e – USB 5 V\/3 A, Quick Charge 2.0 9 V\/2.22 A or USB PD 2.0 5–15 V\/2 A via the 1 m USB-C cable with USB-A adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for vehicles\u003c\/strong\u003e – IP67, SAE J1455 and E-Mark among RAM's listed certifications; over-current, short-circuit and over-temperature protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharges through a case\u003c\/strong\u003e – up to 8 mm between puck and phone, according to RAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMagnetic alignment: Apple iPhone 12 and later – RAM lists iPhone 12, 13, 14, 15, 16 and 17 families, iPhone 16e, 17e, iPhone Air and iPhone 18 Pro\u003c\/li\u003e\n\u003cli\u003eAlso listed by RAM: iPhone 8, 8 Plus, X, Xr, Xs, Xs Max, SE\u003c\/li\u003e\n\u003cli\u003eSamsung Galaxy S8–S26 series (incl. Plus, Ultra, S8 Active, S10e, S20 FE 5G) and Galaxy Note 8, 9, 10, 10 Plus\u003c\/li\u003e\n\u003cli\u003eGoogle Pixel 3, 3 XL, 4, 4 XL, 5, 6, 6 Pro, 7, 7 Pro, 8, 8 Pro, 9, 9 Pro, 9 Pro XL, 9a\u003c\/li\u003e\n\u003cli\u003eAlso listed: BlackBerry Evolve X; Blackview BV9900, BV9900 Pro; Cat S62, S62 Pro; Huawei Mate 20 Pro, Mate 20 X, P30 Pro; LG G6, G6 Plus, G7\/G8\/G8S ThinQ, V30, V35\/V40\/V50 ThinQ; Nokia 8 Sirocco, 9 PureView; Panasonic Eluga X1 Pro; Razer Phone 2; Sony Xperia XZ2, XZ2 Compact, XZ3; Xiaomi Mi 9, Mi 9 Explorer, Mi Mix 2S, Mi Mix 3; ZTE Axon 9 Pro, Axon 10 Pro\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") double socket arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAP-B-202-AP-MAG-1-W2MU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-W2M Qi2 15 W wireless charger, RAP-B-202-AP-MAG-1U ball adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eInput USB 5 V\/3 A; QC 2.0 9 V\/2.22 A; USB PD 2.0 5–15 V\/2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCharging Output\u003c\/th\u003e\n\u003ctd\u003eQi2 MPP 15 W; EPP 7.5 W; BPP 5 W; efficiency 80 % or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eUSB-C male with USB-A adapter, 1 m cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCharging Distance\u003c\/th\u003e\n\u003ctd\u003eUp to 8 mm between puck and device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e0 °C to +40 °C (storage −20 °C to +80 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eOver-current, short-circuit and over-temperature protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eIP67, SAE J1455, FCC, CE, E-Mark, RCM; RoHS and WEEE compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07 kg (0.15 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eBall adapter, RAM Qi2 wireless charging puck with cable and USB-A adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRolling out iPhones with in-vehicle charging across a sales or service fleet? As an Official RAM Mounts Reseller we supply charging heads, arms and bases and quote project pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188835836170,"sku":"ramb202apmag","price":90.28,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAP-B-202-AP-MAG-1-W2MU_1.jpg?v=1792007346"},{"product_id":"ram-mounts-round-plate-with-ball-b-size-amps-pattern-ram-b-202u","title":"RAM Mounts Round Plate with Ball, AMPS Pattern, B-Size (RAM-B-202U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Round Plate with Ball\u003c\/strong\u003e (RAM-B-202U) is the building block behind most RAM B-size mounts: a Ø 63.5 mm (2.5\") aluminium disc with a 25.4 mm (1\") rubber ball on top. Screw it to a dashboard, console or panel as a base, or bolt it under a holder with AMPS holes so the holder gets a ball. RAM uses it in more than 140 kits, which also makes it the usual spare when a mount moves to another vehicle.\u003c\/p\u003e\n\u003cp\u003eComplete it with a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-medium-95-mm-ram-b-201u\"\u003emedium B-size double socket arm\u003c\/a\u003e (also as \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-short-61-mm-ram-b-201u-a\"\u003eshort\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-long-152-mm-ram-b-201u-c\"\u003elong\u003c\/a\u003e) and a holder such as the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-universal-phone-holder-with-b-size-ball-ram-hol-un7bu\"\u003eX-Grip phone holder with ball\u003c\/a\u003e. Need it lighter and rust-free? Take the \u003ca href=\"\/en\/products\/ram-mounts-composite-round-plate-with-ball-amps-pattern-b-size-rap-b-202u\"\u003ecomposite round plate\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo hole patterns in one plate\u003c\/strong\u003e – AMPS 4-hole 30 × 38 mm (1.181\" × 1.496\") plus a 3-hole 120° pattern on a Ø 46 mm (1.812\") circle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase or adapter\u003c\/strong\u003e – screw it to a surface as a base, or bolt it under a holder, cradle or device with AMPS holes to give it a B-size ball\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with every B-size arm\u003c\/strong\u003e – the 25.4 mm (1\") rubber ball fits all RAM B-size double socket arms and soaks up vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal plate\u003c\/strong\u003e – powder-coated marine-grade aluminium, 68 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for phones and small tablets\u003c\/strong\u003e – rated 0.9 kg (2 lb) in standard use and 0.45 kg (1 lb) in heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDashboards, decks and panels\u003c\/h2\u003e\n\u003cp\u003eThe flat plate sits on a car or truck dashboard, a boat console, a kayak deck or an aircraft instrument panel. In aircraft, fit it only where the aircraft documentation and your aviation authority allow it; in road vehicles, keep the mount and the device out of airbag deployment zones.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM holders, cradles and devices with the AMPS 4-hole (30 × 38 mm) or 3-hole 120° (Ø 46 mm) pattern\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") double socket arms\u003c\/li\u003e\n\u003cli\u003eFlat surfaces: dashboards, consoles, kayak decks, aircraft panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-202U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate Size\u003c\/th\u003e\n\u003ctd\u003eØ 63.5 mm (2.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\"); 3-hole 120° Ø 46 mm (1.812\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eDrill-down or holder adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07 kg (0.15 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eRound plate with B-size ball\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eInstallers who fit RAM mounts every week keep a box of these plates on the shelf. As an Official RAM Mounts Reseller we supply RAM-B-202U in workshop quantities with volume pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188836032778,"sku":"ramb202u","price":14.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-202U_1.jpg?v=1792002348"},{"product_id":"ram-mounts-twist-lock-composite-suction-cup-base-with-ball-b-size-rap-b-224-1u","title":"RAM Mounts Twist-Lock Composite Suction Cup Base with Ball, B-Size (RAP-B-224-1U)","description":"\u003cp\u003eThis is the all-composite build of RAM's 83.8 mm windscreen base. The \u003cstrong\u003eRAM Mounts Twist-Lock Composite Suction Cup Base with Ball\u003c\/strong\u003e (RAP-B-224-1U) pairs the RAP-224-1U Twist-Lock cup with a composite diamond ball base (RAP-B-238U), which brings it down to 109 g – lighter than the aluminium-plate \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-base-with-ball-b-size-aluminium-ram-b-224-1u\"\u003eRAM-B-224-1U\u003c\/a\u003e. Besides vehicle windscreens, it is used on stand-up paddleboards.\u003c\/p\u003e\n\u003cp\u003eKeep the mount metal-free with a \u003ca href=\"\/en\/products\/ram-mounts-composite-double-socket-arm-b-size-medium-95-mm-rap-b-201u\"\u003ecomposite medium arm\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-composite-double-socket-arm-b-size-short-61-mm-rap-b-201u-a\"\u003ecomposite short arm\u003c\/a\u003e, then add a holder such as the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-universal-phone-holder-with-b-size-ball-ram-hol-un7bu\"\u003eX-Grip phone holder\u003c\/a\u003e. Need a smaller cup? The \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-low-profile-suction-cup-ball-base-b-size-rap-b-224-2u\"\u003elow-profile Twist-Lock base\u003c\/a\u003e measures 69.9 mm.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite throughout\u003c\/strong\u003e – cup and diamond ball base are high-strength composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight\u003c\/strong\u003e – 109 g – about 18 g less than the version with the aluminium ball base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock grip\u003c\/strong\u003e – Ø 83.8 mm (3.3\") cup for windscreens and other smooth, non-porous surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwappable ball base\u003c\/strong\u003e – the cup takes either the composite RAP-B-238U or the aluminium RAM-B-238U diamond ball base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB-size rating\u003c\/strong\u003e – 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle windscreens, glass and other smooth, non-porous surfaces\u003c\/li\u003e\n\u003cli\u003eStand-up paddleboards with a smooth surface for the cup\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") double socket arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAP-B-224-1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAP-224-1U Twist-Lock suction cup, RAP-B-238U composite diamond ball base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.11 kg (0.24 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock suction cup with composite diamond ball base, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSupplying a paddle centre, a rental business or a delivery fleet with suction mounts? As an Official RAM Mounts Reseller we deliver RAP-B-224-1U in the numbers you need, including spares.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188836098314,"sku":"ramb2241u","price":29.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAP-B-224-1U_1.jpg?v=1792007353"},{"product_id":"ram-mounts-twist-lock-suction-cup-base-with-ball-b-size-aluminium-ram-b-224-1u","title":"RAM Mounts Twist-Lock Suction Cup Base with Ball, B-Size (RAM-B-224-1U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Twist-Lock Suction Cup Base with Ball\u003c\/strong\u003e (RAM-B-224-1U) is the windscreen base behind RAM's B-size suction mounts, sold on its own. A Ø 83.8 mm (3.3\") Twist-Lock cup carries an aluminium diamond plate with a 25.4 mm (1\") ball, ready for a double socket arm and a holder. It grips glass and other smooth, non-porous surfaces in cars, trucks, boats and aircraft – no drilling.\u003c\/p\u003e\n\u003cp\u003eAdd a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-medium-95-mm-ram-b-201u\"\u003emedium B-size arm\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-short-61-mm-ram-b-201u-a\"\u003eshort arm\u003c\/a\u003e and a holder such as the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-universal-phone-holder-with-b-size-ball-ram-hol-un7bu\"\u003eX-Grip phone holder\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-x-grip-holder-for-7-inch-8-inch-tablets-with-b-size-ball-ram-hol-un8bu\"\u003eX-Grip for 7–8\" tablets\u003c\/a\u003e. Want it without aluminium? See the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-composite-suction-cup-base-with-ball-b-size-rap-b-224-1u\"\u003ecomposite version\u003c\/a\u003e; for a smaller cup, the \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-low-profile-suction-cup-ball-base-b-size-rap-b-224-2u\"\u003elow-profile base\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge Twist-Lock cup\u003c\/strong\u003e – Ø 83.8 mm (3.3\") suction cup for glass and smooth, non-porous surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal ball plate\u003c\/strong\u003e – the ball sits on an aluminium diamond base (RAM-B-238U) fitted to the RAP-224-1U cup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for any B-size arm\u003c\/strong\u003e – 25.4 mm (1\") rubber ball for all RAM B-size double socket arms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight\u003c\/strong\u003e – 127 g including the ball base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhone and small-tablet load\u003c\/strong\u003e – rated 0.9 kg (2 lb) in standard use and 0.45 kg (1 lb) in heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWindscreens on the road, water and in the air\u003c\/h2\u003e\n\u003cp\u003eThe cup suits windscreens in cars and trucks, boat screens and aircraft windshields. In an aircraft, mount equipment only where the aircraft's documentation and your aviation authority allow it. In road vehicles, keep the mount out of airbag deployment zones and clear of the driver's view.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWindscreens of cars, trucks, power boats and aircraft\u003c\/li\u003e\n\u003cli\u003eGlass and other smooth, non-porous surfaces\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") double socket arms and the holders that go with them\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-224-1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAP-224-1U Twist-Lock suction cup, RAM-B-238U diamond ball base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuction Cup\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock, Ø 83.8 mm (3.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, high-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.13 kg (0.28 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTwist-Lock suction cup with diamond ball base, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRolling out windscreen-mounted phones or tablets across a vehicle fleet, or need spare cups for mounts already in use? As an Official RAM Mounts Reseller we supply RAM-B-224-1U on its own and quote fleet quantities.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188836131082,"sku":"ramb2241um","price":31.28,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-224-1U_1.jpg?v=1792002356"},{"product_id":"ram-mounts-diamond-ball-base-with-2-hole-amps-pattern-b-size-ram-b-238u","title":"RAM Mounts Diamond Ball Base with 2-Hole AMPS Pattern, B-Size (RAM-B-238U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Diamond Ball Base\u003c\/strong\u003e (RAM-B-238U) is one of RAM's core building blocks: it turns up in 121 of RAM's own kits. The 61.7 × 33.3 mm aluminium plate carries a B-size ball and has two holes 48.6 mm apart, so it can be screwed to a dashboard, an aircraft panel or a kayak deck, or bolted to the back of a phone or tablet holder. This is the black aluminium version; RAM also makes it in composite and in chrome.\u003c\/p\u003e\n\u003cp\u003eConnect it with a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-medium-95-mm-ram-b-201u\"\u003emedium B-size arm\u003c\/a\u003e to a holder such as the \u003ca href=\"\/en\/products\/ram-mounts-x-grip-universal-phone-holder-with-b-size-ball-ram-hol-un7bu\"\u003eX-Grip phone holder\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/ram-mounts-quick-grip-pro-phone-holder-with-b-size-ball-ram-hol-pd5bu\"\u003eQuick-Grip Pro\u003c\/a\u003e. For salt water or a lighter build, see the \u003ca href=\"\/en\/products\/ram-mounts-composite-diamond-ball-base-b-size-rap-b-238u\"\u003ecomposite version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-hole AMPS\u003c\/strong\u003e – holes 48.6 mm (1.912\") apart – the pattern on the back of many RAM holders and cradles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact diamond plate\u003c\/strong\u003e – 61.7 × 33.3 mm (2.43\" × 1.31\") fits narrow panels and consoles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium strength\u003c\/strong\u003e – powder-coated marine-grade aluminium, rated 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks both ways\u003c\/strong\u003e – screw it to a surface as a base, or to a holder so the holder can take a B-size arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDashboards, panels and decks\u003c\/h2\u003e\n\u003cp\u003eRAM lists this base for car and truck dashboards, aircraft panels and flat surfaces on boats and kayaks. Two screws hold it down, so it suits places where a clamp has nothing to grip. On an aircraft, follow the aircraft's and your aviation authority's rules for fitting equipment to the panel.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCar and truck dashboards, aircraft panels, boat and kayak flat surfaces\u003c\/li\u003e\n\u003cli\u003eRAM holders and cradles with the 2-hole AMPS pattern (48.6 mm \/ 1.912\")\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") double socket arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-238U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate Size\u003c\/th\u003e\n\u003ctd\u003e61.7 × 33.3 mm (2.43\" × 1.31\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e2-hole AMPS, 48.6 mm (1.912\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, powder-coated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eDrill-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.05 kg (0.10 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eDiamond ball base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eStandardising on one base across vans, boats or aircraft? As an Official RAM Mounts Reseller we keep this base in stock and quote quantity pricing for installers.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188836262154,"sku":"ramb238u","price":12.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-238U_1.jpg?v=1792002382"},{"product_id":"ram-mounts-add-a-ball-accessory-ball-b-size-for-c-size-socket-arms-ram-b-273-cu","title":"RAM Mounts Add-A-Ball Accessory Ball for C-Size Socket Arms, B-Size (RAM-B-273-CU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Add-A-Ball for C-Size Arms\u003c\/strong\u003e (RAM-B-273-CU) lets one existing C-size mount carry a second device. It takes the place of the bolt through the middle of a short or medium C-size double socket arm and adds a 25.4 mm (1\") B-size ball on the side facing away from the knob. A phone can then ride on the same arm that already holds a tablet – handy where there is no room, or no permission, for a second base.\u003c\/p\u003e\n\u003cp\u003eOn the new ball, a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-short-61-mm-ram-b-201u-a\"\u003eshort\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-b-size-medium-95-mm-ram-b-201u\"\u003emedium B-size arm\u003c\/a\u003e plus an \u003ca href=\"\/en\/products\/ram-mounts-x-grip-universal-phone-holder-with-b-size-ball-ram-hol-un7bu\"\u003eX-Grip phone holder\u003c\/a\u003e makes the second mount. Compatible C-size arms: the \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-short-90-mm-ram-201u-b\"\u003eshort\u003c\/a\u003e and \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-medium-145-mm-ram-201u\"\u003emedium C-size arm\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond device, one base\u003c\/strong\u003e – adds a B-size ball to a C-size arm, so two devices share one mounting point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwaps for the arm bolt\u003c\/strong\u003e – the supplied 5\/16\"-18 bolt, 102 mm (4\") long, replaces the original bolt through the arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor short and medium C arms\u003c\/strong\u003e – suits RAM's short and medium C-size double socket arms – not the long C-size arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB-size capacity\u003c\/strong\u003e – the added ball carries 0.9 kg (2 lb) in standard use and 0.45 kg (1 lb) heavy-duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-grade aluminium\u003c\/strong\u003e – powder-coated for use in vehicles and on boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM C-size double socket arms, short and medium (e.g. RAM-201U-B, RAM-201U)\u003c\/li\u003e\n\u003cli\u003eNot suitable for the long C-size arm (RAM-201U-D)\u003c\/li\u003e\n\u003cli\u003eAny RAM B-size (25.4 mm \/ 1\") double socket arm on the added ball\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-273-CU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eShort and medium C-size double socket arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003e5\/16\"-18 x 4\" bolt, 5\/16\" split lock washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07 kg (0.16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eAccessory ball (RAM-B-367BU), 5\/16\"-18 x 4\" bolt, 5\/16\" split lock washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eAdding phones next to existing tablets across a fleet or on several boat helms? As an Official RAM Mounts Reseller we supply the add-on balls together with the B-size arms and holders that go on them.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188836458762,"sku":"ramb273cu","price":17.06,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-273-CU_1.jpg?v=1792002410"},{"product_id":"ram-mounts-pod-i-no-drill-vehicle-mount-with-18-inch-rod-and-round-amps-plate-b-size-ram-b-316-1-202u","title":"RAM Mounts Pod I No-Drill Vehicle Mount with 18\" Rod and Round Plate, B-Size (RAM-B-316-1-202U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Pod I No-Drill Vehicle Mount with 18\" Rod and Round Plate\u003c\/strong\u003e (RAM-B-316-1-202U) brings a device up from the floor of a car or truck without a single new hole. The Pod I base fastens at the seat rail with one of the vehicle's own bolts, a bendable 18\" (457 mm) aluminium rod rises from it, and a B-size socket arm holds a 63.5 mm (2.5\") round AMPS plate at the top. It is the base of every Pod I tablet kit in this range.\u003c\/p\u003e\n\u003cp\u003eThe plate takes any AMPS-pattern cradle. Or remove it and clamp a holder with its own ball straight into the socket arm: \u003ca href=\"\/en\/products\/ram-mounts-x-grip-universal-phone-holder-with-b-size-ball-ram-hol-un7bu\"\u003eX-Grip phone\u003c\/a\u003e, \u003ca href=\"\/en\/products\/ram-mounts-x-grip-holder-for-7-inch-8-inch-tablets-with-b-size-ball-ram-hol-un8bu\"\u003eX-Grip 7–8\" tablet\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-x-grip-large-phone-holder-with-b-size-ball-ram-hol-un10bu\"\u003elarge X-Grip phone holder\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo holes in the vehicle\u003c\/strong\u003e – the Pod I base is held by an existing seat-rail bolt – check that your seat has a suitable bolt before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod bends to fit\u003c\/strong\u003e – the 18\" (457 mm) rigid aluminium rod can be bent to bring the screen to the right height and distance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e533 mm overall height\u003c\/strong\u003e – from base to plate the mount stands 533 mm (21\") tall before the rod is bent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal round plate\u003c\/strong\u003e – Ø 63.5 mm (2.5\") with AMPS 4-hole (30 × 38 mm) and 3-hole 120° (Ø 46 mm) patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB-size ball and socket\u003c\/strong\u003e – the socket arm at the top lets the plate turn and tilt; rated 0.9 kg (2 lb) standard and 0.45 kg (1 lb) heavy-duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCars and trucks with a suitable bolt at the seat rail\u003c\/li\u003e\n\u003cli\u003eDoes not fit Chevrolet seats from 2014 onwards that use the seat hook system\u003c\/li\u003e\n\u003cli\u003eCradles and holders with the AMPS 4-hole or 3-hole 120° pattern\u003c\/li\u003e\n\u003cli\u003eHolders with a RAM B-size (25.4 mm \/ 1\") ball, fitted in place of the plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-316-1-202U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-B-316-1U Pod I base with 18\" rod and socket arm, RAM-B-202U round plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRod\u003c\/th\u003e\n\u003ctd\u003e18\" (457 mm) aluminium, bendable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e533 mm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eRound plate Ø 63.5 mm (2.5\"): AMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, high-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eSeat rail, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.61 kg (1.35 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003ePod I base with rod and socket arm, round plate, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eLeased or hired vehicles where the dashboard must stay untouched? As an Official RAM Mounts Reseller we supply Pod I mounts per vehicle and quote fleet pricing for the whole rollout.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188836491530,"sku":"ramb316202u","price":67.54,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-316-1-202U_1.jpg?v=1792002418"},{"product_id":"ram-mounts-ball-adapter-with-amps-plate-b-size-ram-b-347u","title":"RAM Mounts Ball Adapter with AMPS Plate, B-Size (RAM-B-347U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Ball Adapter with AMPS Plate\u003c\/strong\u003e (RAM-B-347U) gives anything with the 4-hole AMPS pattern a B-size ball. The 50.8 × 43.2 mm (2\" × 1.7\") aluminium plate has a hole in each corner on the 30 × 38 mm spacing, so it bolts to the back of GPS cradles such as Garmin zumo and dezl holders. Screwed to a flat panel instead, it works as a compact ball base.\u003c\/p\u003e\n\u003cp\u003eComplete kits built around this plate: \u003ca href=\"\/en\/products\/ram-mounts-drill-down-double-ball-mount-with-rectangle-amps-plate-b-size-medium-arm-ram-b-139u\"\u003edrill-down double ball mount\u003c\/a\u003e, \u003ca href=\"\/en\/products\/ram-mounts-handlebar-u-bolt-double-ball-mount-with-amps-plate-b-size-medium-arm-ram-b-149z-347u\"\u003ehandlebar U-bolt mount\u003c\/a\u003e, \u003ca href=\"\/en\/products\/ram-mounts-twist-lock-suction-cup-mount-with-square-amps-plate-b-size-medium-arm-ram-b-166-347u\"\u003eTwist-Lock suction cup mount\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/ram-mounts-motorcycle-brake-clutch-reservoir-mount-with-amps-plate-b-size-medium-arm-ram-b-178u\"\u003ereservoir mount for Garmin zumo\u003c\/a\u003e. Lighter option: \u003ca href=\"\/en\/products\/ram-mounts-composite-ball-adapter-with-amps-plate-b-size-rap-b-347u\"\u003ecomposite version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry-standard AMPS\u003c\/strong\u003e – four corner holes at 30 × 38 mm (1.181\" × 1.496\") match the back of many GPS and device cradles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks as adapter or base\u003c\/strong\u003e – bolt it to a cradle to give the device a ball, or screw it down on a flat surface as a drill-down ball base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB-size ball\u003c\/strong\u003e – 25.4 mm (1\") rubber ball for every RAM B-size double socket arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact aluminium plate\u003c\/strong\u003e – 50.8 × 43.2 mm (2\" × 1.7\"), powder-coated marine-grade aluminium, 0.06 kg (0.13 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load\u003c\/strong\u003e – 0.9 kg (2 lb) in standard use and 0.45 kg (1 lb) in heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eListed by RAM: Garmin dezl OTR1000, GPSMAP 276Cx, RV 890, RV 1090, Tread, zumo 350, 396 LMT-S, 400, 450, 500, 550, 590, 595LM, 660, XT and XT2\u003c\/li\u003e\n\u003cli\u003eMagellan TRX7 and TRX7 CS; Trail Tech Voyager Pro\u003c\/li\u003e\n\u003cli\u003eCradles and holders with the AMPS 4-hole (30 × 38 mm) pattern\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") double socket arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-347U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate Size\u003c\/th\u003e\n\u003ctd\u003e50.8 × 43.2 mm (2\" × 1.7\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole, 30 × 38 mm (1.181\" × 1.496\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eBolts to AMPS cradles or drill-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.06 kg (0.13 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eBall adapter with AMPS plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRe-using navigation cradles across a vehicle fleet? As an Official RAM Mounts Reseller we supply AMPS adapters in quantity, together with the arms and bases to match.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188836524298,"sku":"ramb347u","price":13.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-347U_1.jpg?v=1792002425"},{"product_id":"ram-mounts-torque-small-rail-base-for-9-515-9-mm-rails-b-size-ram-b-408-37-62u","title":"RAM Mounts Torque Small Rail Base for 9.5–15.9 mm Rails, B-Size (RAM-B-408-37-62U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Torque Small Rail Base\u003c\/strong\u003e (RAM-B-408-37-62U) clamps onto the thinnest tubes in a vehicle – 9.5 to 15.9 mm across. Typical places are scooter and motorcycle mirror stems and the steel posts of a car headrest, where a phone holder can face the rear passengers. It bolts on with two cap screws and nyloc nuts, and four sizes of composite bushings make it fit snugly on the smaller rails.\u003c\/p\u003e\n\u003cp\u003eKits built on this base: \u003ca href=\"\/en\/products\/ram-mounts-x-grip-phone-mount-with-torque-small-rail-base-b-size-short-arm-ram-b-408-37-62-a-un7u\"\u003ephone mount, short arm\u003c\/a\u003e, \u003ca href=\"\/en\/products\/ram-mounts-x-grip-phone-mount-with-torque-small-rail-base-b-size-medium-arm-ram-b-408-37-62-un7u\"\u003ephone mount, medium arm\u003c\/a\u003e and \u003ca href=\"\/en\/products\/ram-mounts-x-grip-mount-with-torque-small-rail-base-for-7-8-inch-tablets-b-size-medium-arm-ram-b-408-37-62-un8u\"\u003e7–8\" tablet mount\u003c\/a\u003e. For thicker bars, use the \u003ca href=\"\/en\/products\/ram-mounts-torque-medium-rail-base-for-19-125-4-mm-rails-b-size-ram-b-408-75-1u\"\u003emedium Torque base\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for thin rails\u003c\/strong\u003e – fits tubes from 9.5 to 15.9 mm (0.375\"–0.625\") in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnug fit at every size\u003c\/strong\u003e – composite bushings of 0.32\", 0.4\", 0.47\" and 0.55\" plus a rubber strip pad the clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStays tight\u003c\/strong\u003e – nyloc nuts do not back off under engine vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall and light\u003c\/strong\u003e – powder-coated marine-grade aluminium, about 0.10 kg (0.21 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB-size ball\u003c\/strong\u003e – connects to any RAM B-size double socket arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRound rails 9.5–15.9 mm (0.375\"–0.625\"): scooter and motorcycle mirror stems, car headrest posts\u003c\/li\u003e\n\u003cli\u003eAll RAM B-size (25.4 mm \/ 1\") double socket arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-B-408-37-62U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamp Range\u003c\/th\u003e\n\u003ctd\u003e9.5–15.9 mm (0.375\"–0.625\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eB, 25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated marine-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eBolted rail clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003e2× #8-32 x 0.75\" socket head cap screws, 2× #8-32 nyloc nuts, composite bushings 0.32\", 0.4\", 0.47\" and 0.55\" (2 of each), 57.2 mm rubber strip, 9\/64\" hex key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.10 kg (0.21 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTorque small rail base with ball, hardware and spacer pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eEquipping scooter couriers or a fleet of cars with rear-seat screens on the headrests? As an Official RAM Mounts Reseller we keep Torque bases and spare hardware packs in our range.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188837212426,"sku":"ramb40862u","price":36.73,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-B-408-37-62U_1.jpg?v=1792002443"},{"product_id":"ram-mounts-double-ball-mount-with-steel-reinforced-round-plates-d-size-short-ram-d-101u-c-in1","title":"RAM Mounts Double Ball Mount with Steel-Reinforced Round Plates, D-Size, Short Arm (RAM-D-101U-C-IN1)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Steel-Reinforced D-Size Ball Mount\u003c\/strong\u003e (RAM-D-101U-C-IN1) looks like the standard short D-size mount, but each ball plate is built around a steel-reinforced bolt. That makes the ball post the strongest part of the assembly for terminals that take a beating. The 91.4 mm (3.6\") arm keeps it compact at 200 mm (7.875\") tall.\u003c\/p\u003e\n\u003cp\u003eReplacing a single plate? The \u003ca href=\"\/en\/products\/ram-mounts-large-round-plate-with-ball-steel-reinforced-bolt-d-size-ram-d-202u-in1\"\u003esteel-reinforced large round plate\u003c\/a\u003e is sold on its own. For a longer reach, the \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-d-size-medium-214-mm-ram-d-201u\"\u003emedium D-size arm\u003c\/a\u003e fits the same balls.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel-reinforced ball bolts\u003c\/strong\u003e – both large round plates carry their ball on a steel-reinforced bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in for the standard short kit\u003c\/strong\u003e – same 93.5 mm (3.68\") plates, large 3-hole 120° and 2-hole 180° patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact\u003c\/strong\u003e – 91.4 mm (3.6\") socket to socket, 200 mm (7.875\") overall height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD-size capacity\u003c\/strong\u003e – rated for 2.72 kg (6 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHeavy terminals, hard use\u003c\/h2\u003e\n\u003cp\u003eRAM lists this kit for Honeywell Thor CV30, CV31, VX8 and VX9 vehicle-mount computers. If the standard \u003ca href=\"\/en\/products\/ram-mounts-double-ball-mount-with-two-large-round-plates-d-size-short-arm-ram-d-101u-c\"\u003eRAM-D-101U-C\u003c\/a\u003e is already in use on your vehicles, this version keeps the same dimensions and hole patterns, so the brackets and drill holes stay the same.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHoneywell Thor CV30, CV31, VX8, VX9 (listed by RAM)\u003c\/li\u003e\n\u003cli\u003eSurfaces and brackets drilled for the large 3-hole 120° or 2-hole 180° pattern\u003c\/li\u003e\n\u003cli\u003eRAM D-size (57.2 mm \/ 2.25\") arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-D-101U-C-IN1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003e2× RAM-D-202U-IN1 steel-reinforced large round plate, RAM-D-201U-C short arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eHoneywell Thor CV30, CV31, VX8, VX9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall Size\u003c\/th\u003e\n\u003ctd\u003eD, 57.2 mm (2.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003eShort, 91.4 mm (3.6\") socket to socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e200 mm (7.875\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate Size\u003c\/th\u003e\n\u003ctd\u003e2× Ø 93.5 mm (3.68\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e3-hole 120° (large) and 2-hole 180° on both plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad Capacity\u003c\/th\u003e\n\u003ctd\u003e2.72 kg (6 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eMarine-grade aluminium, steel-reinforced ball bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eDrill-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.36 kg (3.00 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTwo steel-reinforced large round plates with ball, short double socket arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRunning terminals in vehicles that see rough work every day? As an Official RAM Mounts Reseller we stock reinforced and standard D-size parts and can quote both for a fleet comparison.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188838129930,"sku":"ramd101ucin1","price":192.18,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-D-101U-C-IN1_1.jpg?v=1792002469"},{"product_id":"ram-mounts-heavy-duty-long-accessory-display-bracket-vesa-amps-ram-dis-103-2au","title":"RAM Mounts Heavy Duty Long Accessory\/Display Bracket, VESA \u0026 AMPS (RAM-DIS-103-2AU)","description":"\u003cp\u003eWith a landscape monitor or tablet in the middle and a phone dock to one side, a workstation quickly outgrows a single plate. \u003cstrong\u003eRAM Mounts Heavy Duty Long Accessory\/Display Bracket\u003c\/strong\u003e (RAM-DIS-103-2AU) solves that with a 309 mm powder-coated steel bracket and extra support brackets for heavier setups. For a portrait screen with a keyboard below, choose the \u003ca href=\"\/en\/products\/ram-mounts-heavy-duty-short-accessory-display-bracket-vesa-amps-ram-dis-103-1au\"\u003eshort 279 mm bracket\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003eMount the bracket with a \u003ca href=\"\/en\/products\/ram-mounts-round-plate-with-ball-c-size-amps-pattern-ram-202u\"\u003eC-size round plate\u003c\/a\u003e and a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-short-90-mm-ram-201u-b\"\u003eshort\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-medium-145-mm-ram-201u\"\u003emedium C-size arm\u003c\/a\u003e; a \u003ca href=\"\/en\/products\/ram-mounts-diamond-ball-base-with-2-hole-amps-pattern-b-size-ram-b-238u\"\u003eB-size diamond base\u003c\/a\u003e also fits the AMPS holes.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLandscape screen plus a dock\u003c\/strong\u003e – the VESA pattern holds a monitor or tablet horizontally, with room for a phone dock on the left or right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger reach\u003c\/strong\u003e – 308.9 mm (12.16\") overall – about 30 mm longer than the short version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport brackets for heavy setups\u003c\/strong\u003e – structural ribs and support brackets keep a screen, dock and keyboard steady together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-coated steel\u003c\/strong\u003e – a hard-wearing finish for daily use in vehicles and at desks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo pattern families\u003c\/strong\u003e – VESA 75 × 75 \/ 100 × 100 mm for the display, AMPS 2-hole and 4-hole for docks, keyboards and the RAM base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMonitors and tablets with a VESA 75 × 75 or 100 × 100 mm pattern, in landscape\u003c\/li\u003e\n\u003cli\u003ePhone docks, keyboards, hubs and speakers with an AMPS 2-hole or 4-hole pattern, including GDS accessories\u003c\/li\u003e\n\u003cli\u003eRAM round or diamond ball bases on the AMPS holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-DIS-103-2AU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e308.9 mm (12.16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eVESA 75 × 75 mm and 100 × 100 mm; AMPS 2-hole and 4-hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrientation\u003c\/th\u003e\n\u003ctd\u003eDisplay in landscape, dock to the left or right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePowder-coated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003e4× #8-32 x 5\/8\" machine screws, 4× #8-32 nyloc nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.83 kg (1.84 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eLong accessory\/display bracket, screws and nuts for a round or diamond base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eFitting a landscape screen and phone dock into every vehicle of a service fleet? Talk to us – as an Official RAM Mounts Reseller we match bracket, base, arm and docks per vehicle and quote the whole rollout.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839145738,"sku":"ramdis1032au","price":50.24,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-DIS-103-2AU_1.jpg?v=1792002658"},{"product_id":"ram-mounts-key-locking-power-dual-usb-a-dock-with-heated-pins-for-zebra-et60-et65-ram-hol-ze25pd2hlu","title":"RAM Mounts Key-Locking Power + Dual USB-A Dock with Heated Pins for Zebra ET60 \u0026 ET65 (RAM-HOL-ZE25PD2HLU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Locking Heated Dual USB ET6x Dock\u003c\/strong\u003e (RAM-HOL-ZE25PD2HLU) is the most complete Zebra ET60\/ET65 dock in RAM's range: key lock, heated pogo pins and a pair of USB-A peripheral ports together. Choose it when the tablet is the hub of a vehicle workstation that faces sub-zero mornings and is often parked unattended.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-HOL-ZE25PD2HLU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eKey-locking power + dual USB dock with heated pins for Zebra ET60 \u0026amp; ET65\u003c\/strong\u003e – 5.5 mm DC input on 1 m cable, 2× USB-A pigtail\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eKeys\u003c\/strong\u003e – 2 keys\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eSide bracket\u003c\/strong\u003e – for accessory mounting\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" and 2× #8-32 x 1\/2\" machine screws, 6× #8-32 nyloc nuts, 4× #10-24 x 5\/8\" machine screws, 4× #10-24 nyloc nuts\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eCable ties\u003c\/strong\u003e – 8× 102 mm (4\") and 2× 178 mm (7\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Hardwire it with the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u\"\u003eRAM-GDS-CHARGE-V10U\u003c\/a\u003e for 10–32 V systems or the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2060-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v9u\"\u003eRAM-GDS-CHARGE-V9U\u003c\/a\u003e for 20–60 V. The \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-d-size-ram-d-2461u\"\u003eD-size VESA 75 plate\u003c\/a\u003e or a \u003ca href=\"\/en\/products\/ram-mounts-ball-adapter-with-amps-plate-c-size-ram-347u\"\u003eC-size AMPS ball adapter\u003c\/a\u003e with a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-short-90-mm-ram-201u-b\"\u003eshort C-size arm\u003c\/a\u003e gives a stiff base for the dock.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll three upgrades\u003c\/strong\u003e – key lock with 2 keys, heated pogo pins and two USB-A ports in one dock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts for two devices\u003c\/strong\u003e – USB 2.0, 12 Mbps, up to 900 mA per port, 305 mm (12\") pigtail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold-weather contacts\u003c\/strong\u003e – heating elements keep the pins from icing up in wet, freezing conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyboard-compatible\u003c\/strong\u003e – the 2-in-1 latch secures the tablet while the Zebra keyboard opens and closes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable\u003c\/strong\u003e – side bracket, Vent-Temp, Temp-Right and NFC Extender add-ons, AMPS and VESA 75 back\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWinter-ready workstation\u003c\/h2\u003e\n\u003cp\u003eTwo USB ports run a scanner and a keyboard or another accessory, the heated contacts keep the tablet charging when the vehicle has stood outside overnight, and the key lock keeps it in place between jobs. If one of those – lock, heating or the second port – is not needed, a simpler sibling dock from the same family covers the job.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZebra ET60 and ET65, with or without the keyboard\u003c\/li\u003e\n\u003cli\u003eTwo USB 2.0 peripherals at up to 900 mA each\u003c\/li\u003e\n\u003cli\u003eRAM GDS hardwire chargers with a male 5.5 mm DC plug\u003c\/li\u003e\n\u003cli\u003eRAM C- and D-size parts with AMPS 4-hole or VESA 75 × 75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-HOL-ZE25PD2HLU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eZebra ET60, ET65 (with or without Zebra keyboard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eKey lock, 2 keys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e5.5 mm DC input, 1 m (3.3 ft) cable; charging via heated pogo pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData Ports\u003c\/th\u003e\n\u003ctd\u003e2× USB 2.0 Type-A on 305 mm (12\") pigtail; 12 Mbps; 900 mA per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\"); VESA 75 × 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eRoHS, WEEE, FCC, CE, ICES, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.99 kg (2.18 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eLocking heated power + dual USB dock, 2 keys, side bracket, mounting hardware, cable ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSpecifying one dock for a mixed fleet that faces Nordic winters? As an Official RAM Mounts Reseller we help you settle on the right ET6x variant and supply it with chargers and mounts in volume.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839309578,"sku":"ramdocket6065","price":721.56,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-HOL-ZE25PD2HLU_1.jpg?v=1792006641"},{"product_id":"ram-mounts-spring-loaded-powered-dock-for-panasonic-fz-a3-ram-hol-pan16pu","title":"RAM Mounts Spring-Loaded Powered Dock for Panasonic FZ-A3 (RAM-HOL-PAN16PU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Spring-Loaded Powered Dock for Panasonic FZ-A3\u003c\/strong\u003e (RAM-HOL-PAN16PU) charges the tablet through pogo-pin contacts whenever it is docked, fed from a 5.5 mm DC jack on the dock. Cut-outs keep every button and port within reach, and there is room for the Panasonic extended battery. The back carries both a 4-hole AMPS and a VESA 75 × 75 mm pattern for RAM C- and D-size bases.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-HOL-PAN16PU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003ePowered dock for Panasonic FZ-A3\u003c\/strong\u003e – spring-loaded, pogo-pin charging, 5.5 mm DC jack, AMPS 4-hole and VESA 75 × 75 mm on the back\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" machine screws, 4× #8-32 nyloc nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Power it with the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u\"\u003e10–32 V hardwire charger\u003c\/a\u003e or, on forklifts, the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2060-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v9u\"\u003e20–60 V version\u003c\/a\u003e. For the mount, choose a \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-c-size-ram-2461u\"\u003eC-size\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-d-size-ram-d-2461u\"\u003eD-size VESA 75 plate\u003c\/a\u003e, or a \u003ca href=\"\/en\/products\/ram-mounts-round-plate-with-ball-c-size-amps-pattern-ram-202u\"\u003eC-size round plate\u003c\/a\u003e, with a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-medium-145-mm-ram-201u\"\u003eC-size arm\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharges when docked\u003c\/strong\u003e – pogo-pin contacts take power from the dock's 5.5 mm DC jack – no cable into the tablet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts and buttons stay free\u003c\/strong\u003e – cut-outs leave all controls and ports reachable; the Panasonic extended battery and the RAM Mounting \u0026amp; Accessory Plate are supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom for a second device\u003c\/strong\u003e – a 2-hole AMPS accessory bracket can be attached to the dock to carry a phone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC- and D-size mounting\u003c\/strong\u003e – AMPS 4-hole 30 × 38 mm (1.181\" × 1.496\") and VESA 75 × 75 mm patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle approvals\u003c\/strong\u003e – listed with FCC, IC and E-Mark regulatory approval and CE and RoHS certification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIn vehicles and on forklifts\u003c\/h2\u003e\n\u003cp\u003eWire the dock to the vehicle with a GDS hardwire charger that ends in a 5.5 mm plug: the 10–32 V version for cars and vans, the 20–60 V version for forklift electrics. A 2-hole AMPS accessory bracket can be added to the dock, giving a second mounting point for a phone beside the tablet. Position it outside airbag deployment zones.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePanasonic FZ-A3, including with the Panasonic extended battery\u003c\/li\u003e\n\u003cli\u003eRAM C- and D-size bases with the AMPS 4-hole (30 × 38 mm) or VESA 75 × 75 mm pattern\u003c\/li\u003e\n\u003cli\u003eGDS hardwire chargers with a male 5.5 mm DC plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-HOL-PAN16PU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003ePanasonic FZ-A3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e5.5 mm DC jack; charging via pogo pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\"); VESA 75 × 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eH 266.7 × W 284.2 × D 105.7 mm (10.5\" × 11.19\" × 4.16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eFCC, IC, E-Mark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eCE, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.94 kg (2.07 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003ePowered dock, 4 machine screws, 4 nyloc nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMoving a fleet of service vans or lift trucks onto the FZ-A3? As an Official RAM Mounts Reseller we size the dock, charger, plate and arm for each vehicle type and quote the whole project.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839342346,"sku":"ramdockfza3","price":271.56,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-HOL-PAN16PU_1.jpg?v=1792005790"},{"product_id":"ram-mounts-temp-right-dock-heating-module-for-zebra-et6x-getac-zx10-ram-dock-heater1-eu","title":"RAM Mounts Temp-Right Dock Heating Module for Zebra ET6x \u0026 Getac ZX10 (RAM-DOCK-HEATER1-EU)","description":"\u003cp\u003eRugged tablets slow down or shut off when a freezer store or an unheated cab gets too cold. \u003cstrong\u003eRAM Mounts Temp-Right Dock Heating Module\u003c\/strong\u003e (RAM-DOCK-HEATER1-EU) fits onto an existing RAM or GDS dock for the Zebra ET6x or Getac ZX10 and blows warm air across the back of the docked tablet. It switches itself on at around 0 °C (32 °F) and off again once the device is back in its working range.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-DOCK-HEATER1-EU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTemp-Right heating module\u003c\/strong\u003e – thermistor control, 12 V DC axial fan, safety plunger, 1 m input cable\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eAssembly hardware\u003c\/strong\u003e – to fit the module to the dock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 RAM specifies the 24–60 V DC input (12 V DC output) charger RAM-GDS-CHARGE-V16U to power this module – order it together with the heater.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches itself on and off\u003c\/strong\u003e – an integrated thermistor starts the heater at about 0 °C (32 °F) and stops it once the tablet is warm enough to work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat where the tablet needs it\u003c\/strong\u003e – a 12 V DC axial fan pushes warm air across the back of the docked device\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnly heats a docked tablet\u003c\/strong\u003e – a safety plunger keeps the heater off until the tablet presses it in the dock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature range\u003c\/strong\u003e – operates from −30 °C to +70 °C and can be stored from −40 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd-on, not a new dock\u003c\/strong\u003e – fits the existing RAM and GDS docks for Zebra ET6x and Getac ZX10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIn cold stores and on cold routes\u003c\/h2\u003e\n\u003cp\u003eRAM built Temp-Right for cold-storage warehousing and for transport and logistics vehicles that run in deep winter. Because a thermistor controls the heater, drivers and warehouse staff do not have to switch anything – the tablet is simply kept warm while it sits in the dock.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM and GDS tablet docks for Zebra ET6x\u003c\/li\u003e\n\u003cli\u003eRAM and GDS tablet docks for Getac ZX10\u003c\/li\u003e\n\u003cli\u003ePower from RAM's 24–60 V DC input charger RAM-GDS-CHARGE-V16U (12 V DC output), sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-DOCK-HEATER1-EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eDocks for Zebra ET6x and Getac ZX10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e11–16 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Output\u003c\/th\u003e\n\u003ctd\u003e85 W; 12 V @ 7.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eActivation\u003c\/th\u003e\n\u003ctd\u003eBelow approx. 0 °C (32 °F), thermistor controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Cable\u003c\/th\u003e\n\u003ctd\u003e1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−30 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage Temperature\u003c\/th\u003e\n\u003ctd\u003e−40 °C to +85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite, stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eWEEE and RoHS compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.32 kg (0.71 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eHeating module, assembly hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eEquipping cold-store equipment or winter delivery vehicles with ET6x or ZX10 tablets? As an Official RAM Mounts Reseller we can supply the dock, heater and the right charger as one set per vehicle.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839375114,"sku":"ramdockheat1-eu","price":282.94,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-DOCK-HEATER1-EU_1.jpg?v=1792002675"},{"product_id":"ram-mounts-locking-gds-tough-dock-for-samsung-tab-active5-3-ram-gds-dockl-sam62cpu","title":"RAM Mounts Locking GDS Tough-Dock for Samsung Galaxy Tab Active5 \u0026 Active3 (RAM-GDS-DOCKL-SAM62CPU)","description":"\u003cp\u003eCharge and lock, nothing more: \u003cstrong\u003eRAM Mounts Tab Active5\/Active3 Tough-Dock with key lock\u003c\/strong\u003e (RAM-GDS-DOCKL-SAM62CPU) is the basic dock for Tab Active tablets in an IntelliSkin Next Gen sleeve. Drop the tablet in, the spring latch closes, and the key stops anyone lifting it out of an unattended van or forklift. With no USB ports it is the simplest of the Tab Active locking docks.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-GDS-DOCKL-SAM62CPU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eLocking top latch\u003c\/strong\u003e – spring-loaded, keyed (RAM-GDS-DOCKLH2U)\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eDock body for Tab Active\u003c\/strong\u003e – RAM-GDS-DOCKB-SAM62U\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eDock cup with USB-C input\u003c\/strong\u003e – RAM-GDS-DOCK-V10C-CU, pogo-pin charging\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eCable clamp\u003c\/strong\u003e – \u003ca href=\"\/en\/products\/ram-mounts-gds-cable-clamp-for-micro-usb-usb-c-cables-ram-gds-cab-clamp1u\"\u003eRAM-GDS-CAB-CLAMP1U\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eKeys\u003c\/strong\u003e – 2\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" machine screws, 4× #8-32 nyloc nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Power the USB-C input with a \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-1030-v-input-ram-gds-charge-v21cu\"\u003e10–30 V PD hardwire charger\u003c\/a\u003e, or the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-3060-v-input-ram-gds-charge-v22cu\"\u003e30–60 V version\u003c\/a\u003e on electric forklifts. Mount it with a \u003ca href=\"\/en\/products\/ram-mounts-ball-adapter-with-amps-plate-c-size-ram-347u\"\u003eC-size AMPS ball adapter\u003c\/a\u003e and a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-medium-145-mm-ram-201u\"\u003eC-size arm\u003c\/a\u003e. Hot cab? The \u003ca href=\"\/en\/products\/ram-mounts-locking-gds-cool-dock-with-fan-for-samsung-tab-active5-3-ram-gds-docklf-sam62cpu\"\u003elocking Cool-Dock\u003c\/a\u003e adds a fan.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey lock\u003c\/strong\u003e – the top latch locks with a key, deterring theft from unattended vehicles; 2 keys supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharges while docked\u003c\/strong\u003e – USB-C input with 5–20 V @ 3 A (60 W max), passed to the tablet through 8 pogo pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree tablet generations\u003c\/strong\u003e – takes the Galaxy Tab Active5, Active3 and Active2 in IntelliSkin Next Gen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Stand compatible\u003c\/strong\u003e – the GDS Hand-Stand strap and kickstand can stay on the sleeve in the dock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard RAM back\u003c\/strong\u003e – 4-hole AMPS pattern (30 × 38 mm) for RAM ball adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOn forklifts and in vans\u003c\/h2\u003e\n\u003cp\u003eThe dock is built for tablets that stay in the vehicle: a warehouse truck, a yard tractor or a service van. Lock it at the end of the shift, and the tablet is still charged at the start of the next one. Do not mount it in an airbag deployment zone.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSamsung Galaxy Tab Active5, Tab Active3, Tab Active2 in IntelliSkin Next Gen (not included)\u003c\/li\u003e\n\u003cli\u003e\"No Battery Mode\" of Tab Active5\/Active3 is not supported\u003c\/li\u003e\n\u003cli\u003eRAM B- or C-size ball adapters with the AMPS 4-hole pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-DOCKL-SAM62CPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eSamsung Galaxy Tab Active5, Tab Active3, Tab Active2 in IntelliSkin Next Gen (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eKey lock, 2 keys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eUSB-C input; 5–20 V @ 3 A, up to 60 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePogo Pins\u003c\/th\u003e\n\u003ctd\u003e8-pin, charging only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData Ports\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.68 kg (1.50 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eLocking top latch, dock body, USB-C dock cup, cable clamp, 2 keys, mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eFitting out a forklift fleet with Galaxy Tab Active5 tablets? As an Official RAM Mounts Reseller we supply locking docks, chargers and arms per truck and quote the whole job.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839440650,"sku":"ramdocklsam62","price":303.32,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-DOCKL-SAM62CPU_1.jpg?v=1792004041"},{"product_id":"ram-mounts-gds-tough-dock-for-samsung-tab-active5-3-ram-gds-dock-sam62cpu","title":"RAM Mounts GDS Tough-Dock for Samsung Galaxy Tab Active5 \u0026 Tab Active3, USB-C Power (RAM-GDS-DOCK-SAM62CPU)","description":"\u003cp\u003eCharging is all it does: the \u003cstrong\u003eRAM GDS power-only Tough-Dock for Samsung Tab Active5 \/ Active3\u003c\/strong\u003e (RAM-GDS-DOCK-SAM62CPU) seats the tablet, sleeved in IntelliSkin Next Gen, on pogo pins under a top latch and passes up to 60 W from its USB-C socket. The older Tab Active2 fits as well, so mixed fleets can share one dock model, and RAM uses this dock in its \u003ca href=\"\/en\/products\/ram-mounts-gds-cool-dock-with-fan-for-samsung-tab-active5-3-ram-gds-dockf-sam62cpu\"\u003eCool-Dock for the same tablets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-GDS-DOCK-SAM62CPU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTough-Dock body for Tab Active5 \/ Active3 \/ Active2\u003c\/strong\u003e – RAM-GDS-DOCKB-SAM62U\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTop latch\u003c\/strong\u003e – \u003ca href=\"\/en\/products\/ram-mounts-gds-tough-dock-cool-dock-top-latch-non-locking-ram-gds-dockh2u\"\u003eRAM-GDS-DOCKH2U\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003ePowered dock cup\u003c\/strong\u003e – pogo pins, USB-C female input (\u003ca href=\"\/en\/products\/ram-mounts-gds-powered-dock-cup-for-intelliskin-next-gen-tablets-8-pin-usb-c-ram-gds-dock-v10pu\"\u003eRAM-GDS-DOCK-V10PU\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eGDS USB Type-C 2.0 cable\u003c\/strong\u003e – USB-C to USB-A (\u003ca href=\"\/en\/products\/ram-mounts-gds-usb-a-to-usb-c-2-0-cable-1-m-ram-gds-cab-usbc-amcmu-1\"\u003eRAM-GDS-CAB-USBC-AMCMU-1\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eCable clamp for USB-C cables\u003c\/strong\u003e – with zip ties (\u003ca href=\"\/en\/products\/ram-mounts-gds-cable-clamp-for-micro-usb-usb-c-cables-ram-gds-cab-clamp1u\"\u003eRAM-GDS-CAB-CLAMP1U\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" machine screws, 4× #8-32 nyloc nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Hardwire it with the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-1030-v-input-ram-gds-charge-v21cu\"\u003e10–30 V USB-C PD charger\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-3060-v-input-ram-gds-charge-v22cu\"\u003e30–60 V model\u003c\/a\u003e, and mount it on a \u003ca href=\"\/en\/products\/ram-mounts-ball-adapter-with-amps-plate-b-size-ram-b-347u\"\u003eB-size\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-ball-adapter-with-amps-plate-c-size-ram-347u\"\u003eC-size\u003c\/a\u003e AMPS ball adapter.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Tab Active generations\u003c\/strong\u003e – Galaxy Tab Active5, Tab Active3 and Tab Active2 in IntelliSkin Next Gen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 W charging\u003c\/strong\u003e – 5–20 V @ 3 A through the pogo-pin cup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple wiring\u003c\/strong\u003e – charging only – one USB-C input, no data leads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable and clamp in the box\u003c\/strong\u003e – GDS USB-C to USB-A cable and USB-C cable clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the GDS Hand-Stand\u003c\/strong\u003e – the tablet can keep its hand strap and kickstand attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSamsung Galaxy Tab Active5, Tab Active3 and Tab Active2 in IntelliSkin Next Gen (sleeve sold separately)\u003c\/li\u003e\n\u003cli\u003eRAM B- or C-size ball adapters with the 4-hole AMPS pattern, 30 × 38 mm\u003c\/li\u003e\n\u003cli\u003eGDS Hand-Stand hand strap and kickstand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-DOCK-SAM62CPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eSamsung Galaxy Tab Active5, Tab Active3 and Tab Active2 in IntelliSkin Next Gen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase Required\u003c\/th\u003e\n\u003ctd\u003eIntelliSkin Next Gen sleeve, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eUSB-C female input; 5–20 V @ 3 A, up to 60 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData \/ Peripherals\u003c\/th\u003e\n\u003ctd\u003eCharging only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e4-hole AMPS 30 × 38 mm (1.181\" × 1.496\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eRequires a RAM 4-hole AMPS ball adapter (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.54 kg (1.2 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eDock body, top latch, powered dock cup, USB-C to USB-A cable, cable clamp, 4× #8-32 x 5\/8\" machine screws, 4× #8-32 nyloc nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRunning Galaxy Tab Active3 and Active5 side by side? As an Official RAM Mounts Reseller we supply one dock model for both, plus the sleeves and mounts for each vehicle.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839506186,"sku":"ramdocksam62","price":239.57,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-DOCK-SAM62CPU_1.jpg?v=1792003272"},{"product_id":"ram-mounts-locking-tough-dock-power-dual-usb-for-zebra-et4x-et401-10-inch-with-rugged-frame-ram-hol-ze21pd2klu","title":"RAM Mounts Locking Tough-Dock Power + Dual USB for Zebra ET401 \u0026 ET4x 10\" (RAM-HOL-ZE21PD2KLU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Locking Tough-Dock Power + Dual USB\u003c\/strong\u003e (RAM-HOL-ZE21PD2KLU) brings together everything the 10\" ET4x dock range offers apart from the latch: a key lock, pogo-pin charging and two USB-A ports in one composite housing. Each port delivers up to 900 mA on a 250 mm cable, and power enters through the 5.5 mm DC jack. Use it where a parked vehicle carries the tablet plus two wired peripherals that should not walk off.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-HOL-ZE21PD2KLU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eLocking Tough-Dock Power + Dual USB for Zebra ET4x 10\"\u003c\/strong\u003e – key lock, pogo pins, 5.5 mm DC input (1 m cable), 2× USB 2.0 Type-A on a 250 mm cable\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eKeys\u003c\/strong\u003e – 2 keys for the lock\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eSide bracket\u003c\/strong\u003e – for mounting accessories next to the dock\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" and 2× #8-32 x 1\/2\" machine screws, 6× #8-32 nyloc nuts, 4× #10-24 x 5\/8\" machine screws, 4× #10-24 nyloc nuts\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eCable ties\u003c\/strong\u003e – 2 small\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Choose the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u\"\u003e10–32 V\u003c\/a\u003e or \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2060-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v9u\"\u003e20–60 V\u003c\/a\u003e GDS hardwire charger to suit the vehicle. For a compact install, mount it on a \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-c-size-ram-2461u\"\u003eC-size VESA 75 plate\u003c\/a\u003e with a \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-short-90-mm-ram-201u-b\"\u003eshort C-size arm\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock plus two ports\u003c\/strong\u003e – key lock with 2 keys and 2× USB 2.0 Type-A on one 250 mm cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e900 mA per port\u003c\/strong\u003e – enough current for two USB peripherals; 12 Mbps transfer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharges through contacts\u003c\/strong\u003e – pogo pins powered from the 5.5 mm DC input with 1 m cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanner and battery add-ons\u003c\/strong\u003e – the side scanner works while docked; Expansion Back and PowerPack battery fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts like the rest of the range\u003c\/strong\u003e – AMPS 4-hole, VESA 75 × 75 mm and a 2-hole accessory plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZebra ET40 and ET45 10\" with Rugged Frame\u003c\/li\u003e\n\u003cli\u003eZebra ET401 10\" with RAM Skin (required)\u003c\/li\u003e\n\u003cli\u003eWithout Rugged Frame: insert RAP-INSERT-ZE21LU\u003c\/li\u003e\n\u003cli\u003eNot for IntelliSkin – locking GDS dock RAM-GDS-DOCKL-ZE21PD2U covers those\u003c\/li\u003e\n\u003cli\u003eUp to two USB peripherals, 900 mA per port\u003c\/li\u003e\n\u003cli\u003eRAM C- and D-size bases with AMPS 4-hole or VESA 75 × 75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-HOL-ZE21PD2KLU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eZebra ET4x 10\" with Rugged Frame; ET401 10\" with RAM Skin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eKey lock, 2 keys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e5.5 mm DC input, 1 m cable; charging via pogo pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData Ports\u003c\/th\u003e\n\u003ctd\u003e2× USB 2.0 Type-A on 250 mm cable, 12 Mbps, 900 mA per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\"); VESA 75 × 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eRoHS, WEEE, FCC, CE, ICES, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.85 kg (1.87 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eLocking Tough-Dock Power + Dual USB, 2 keys, side bracket, mounting hardware, 2 cable ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSpecifying fully equipped vehicles – tablet, two peripherals, lock and power? As an Official RAM Mounts Reseller we deliver the whole bill of materials and quote volume pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839571722,"sku":"ramet4t","price":376.54,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-HOL-ZE21PD2KLU_1.jpg?v=1792006445"},{"product_id":"ram-mounts-tough-dock-power-dual-usb-for-zebra-et4x-et401-10-inch-with-rugged-frame-ram-hol-ze21pd2u","title":"RAM Mounts Tough-Dock Power + Dual USB for Zebra ET401 \u0026 ET4x 10\" (RAM-HOL-ZE21PD2U)","description":"\u003cp\u003eTwo peripherals, one dock: \u003cstrong\u003eRAM Mounts Tough-Dock Power + Dual USB for Zebra ET4x 10\"\u003c\/strong\u003e (RAM-HOL-ZE21PD2U) gives the docked tablet a pair of USB-A ports on a 250 mm cable, each rated up to 900 mA. Charging works as on the rest of the range – pogo pins fed from a 5.5 mm DC input – and this version also carries FCC and ICES marks. It does not lock; the \u003ca href=\"\/en\/products\/ram-mounts-locking-tough-dock-power-dual-usb-for-zebra-et4x-et401-10-inch-with-rugged-frame-ram-hol-ze21pd2klu\"\u003elocking dual-USB dock\u003c\/a\u003e does.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-HOL-ZE21PD2U\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTough-Dock Power + Dual USB for Zebra ET4x 10\"\u003c\/strong\u003e – pogo pins, 5.5 mm DC input (1 m cable), 2× USB 2.0 Type-A on a 250 mm cable\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eSide bracket\u003c\/strong\u003e – for mounting accessories next to the dock\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" and 2× #8-32 x 1\/2\" machine screws, 6× #8-32 nyloc nuts, 4× #10-24 x 5\/8\" machine screws, 4× #10-24 nyloc nuts\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eCable ties\u003c\/strong\u003e – 2 small\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Power the dock and both ports from the vehicle with the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u\"\u003e10–32 V hardwire charger\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2060-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v9u\"\u003e20–60 V version\u003c\/a\u003e. A \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-c-size-ram-2461u\"\u003eC-size VESA 75 plate\u003c\/a\u003e and \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-medium-145-mm-ram-201u\"\u003eC-size arm\u003c\/a\u003e take it to the right height.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo USB-A ports\u003c\/strong\u003e – USB 2.0 Type-A ×2 on a 250 mm cable, 12 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore current per port\u003c\/strong\u003e – up to 900 mA on each port, against 500 mA on the single-port dock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging by contact\u003c\/strong\u003e – pogo pins take power from the 5.5 mm DC jack and 1 m input cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Zebra add-on support\u003c\/strong\u003e – side scanner, Expansion Back and PowerPack battery usable in the dock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM mounting standards\u003c\/strong\u003e – AMPS 4-hole 30 × 38 mm, VESA 75 × 75 mm and a 2-hole plate for a diamond base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZebra ET40 and ET45 10\" with Rugged Frame\u003c\/li\u003e\n\u003cli\u003eZebra ET401 10\" with RAM Skin (required)\u003c\/li\u003e\n\u003cli\u003eWithout Rugged Frame: RAM insert RAP-INSERT-ZE21U\u003c\/li\u003e\n\u003cli\u003eNot for IntelliSkin – RAM's GDS dock RAM-GDS-DOCK-ZE21PD2U covers those\u003c\/li\u003e\n\u003cli\u003eUp to two USB peripherals, 900 mA per port\u003c\/li\u003e\n\u003cli\u003eRAM C- and D-size bases with AMPS 4-hole or VESA 75 × 75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-HOL-ZE21PD2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eZebra ET4x 10\" with Rugged Frame; ET401 10\" with RAM Skin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e5.5 mm DC input, 1 m cable; charging via pogo pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData Ports\u003c\/th\u003e\n\u003ctd\u003e2× USB 2.0 Type-A on 250 mm cable, 12 Mbps, 900 mA per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\"); VESA 75 × 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eRoHS, WEEE, FCC, CE, ICES, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.63 kg (1.38 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTough-Dock Power + Dual USB, side bracket, mounting hardware, 2 cable ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eBuilding a mobile workstation around the ET4x 10\" with two wired peripherals? As an Official RAM Mounts Reseller we can specify and supply the complete in-vehicle set.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839604490,"sku":"ramet4t-2","price":293.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-HOL-ZE21PD2U_1.jpg?v=1792006457"},{"product_id":"ram-mounts-powered-dock-for-zebra-et80-et85-ram-hol-ze22pu","title":"RAM Mounts Powered Dock for Zebra ET8x 2-in-1 Tablet (RAM-HOL-ZE22PU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Powered Dock for Zebra ET8x\u003c\/strong\u003e (RAM-HOL-ZE22PU) charges the 2-in-1 tablet through pogo-pin contacts every time it is set in place. A barrel-type DC socket on a 1 m lead brings in the power; there is no lock and no USB port. Bare tablets, framed tablets and tablets with the Zebra keyboard attached all fit the same cradle.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-HOL-ZE22PU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003ePowered dock for Zebra ET8x\u003c\/strong\u003e – pogo-pin charging, 5.5 mm DC input with 1 m cable\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eSide bracket\u003c\/strong\u003e – for accessory mounting\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" and 2× #8-32 x 1\/2\" machine screws, 6× #8-32 nyloc nuts, 4× #10-24 x 5\/8\" machine screws, 4× #10-24 nyloc nuts\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eZip ties\u003c\/strong\u003e – 8× 102 mm (4\") and 2× 178 mm (7\") zip ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Connect the DC input to the vehicle with the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u\"\u003e10–32 V GDS hardwire charger\u003c\/a\u003e (12 V output) or, on higher-voltage forklifts, the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2060-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v9u\"\u003e20–60 V model\u003c\/a\u003e. A \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-c-size-ram-2461u\"\u003eC-size VESA 75 plate\u003c\/a\u003e and \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-medium-145-mm-ram-201u\"\u003eC-size arm\u003c\/a\u003e finish the mount.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharges on contact\u003c\/strong\u003e – pogo pins top up the ET8x whenever it is docked, powered via the 5.5 mm DC jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyboard-friendly\u003c\/strong\u003e – takes the tablet with or without Rugged Frame and with the Friction Hinge Rugged Keyboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule-ready back\u003c\/strong\u003e – two housings for RAM's optional NFC Repeater, Vent-Temp and Temp-Right modules\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory plate built in\u003c\/strong\u003e – 2-hole plate for a RAM diamond base carrying a phone, scanner or the NFC Repeater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMPS and VESA 75\u003c\/strong\u003e – fits RAM bases with 30 × 38 mm AMPS 4-hole or 75 × 75 mm VESA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZebra ET8x 2-in-1 tablets, with or without Rugged Frame\u003c\/li\u003e\n\u003cli\u003eZebra Friction Hinge Rugged Keyboard (optional)\u003c\/li\u003e\n\u003cli\u003eGDS Hand-Stand and Roto-Mag grips; Zebra Expansion Back\u003c\/li\u003e\n\u003cli\u003eRAM bases with AMPS 4-hole or VESA 75 × 75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-HOL-ZE22PU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eZebra ET8x 2-in-1 tablet, with or without Rugged Frame; Friction Hinge Rugged Keyboard supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e5.5 mm DC input, 1 m cable; charging via pogo pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData Ports\u003c\/th\u003e\n\u003ctd\u003eNone (power only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\"); VESA 75 × 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eH 301 mm (11.85\") × W 323.9 mm (12.75\") × D 110.7 mm (4.36\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eRoHS, WEEE, CE, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.08 kg (2.39 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003ePowered dock, side bracket, mounting hardware, 10 zip ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMoving a field team onto ET8x 2-in-1 tablets? As an Official RAM Mounts Reseller we supply powered docks, hardwire chargers and mounts per vehicle with one project quote.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839637258,"sku":"ramet8dock","price":341.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-HOL-ZE22PU_1.jpg?v=1792006556"},{"product_id":"ram-mounts-form-fit-holder-for-zebra-et80-et85-ram-hol-ze22u","title":"RAM Mounts Form-Fit Holder for Zebra ET8x 2-in-1 Tablet (RAM-HOL-ZE22U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts Form-Fit Holder for Zebra ET8x\u003c\/strong\u003e (RAM-HOL-ZE22U) is the plain way to fix an ET8x 2-in-1 in a vehicle: a spring-loaded cradle shaped to the tablet, without electronics and without a lock. It takes the tablet bare or in its Rugged Frame, and with the optional Friction Hinge Rugged Keyboard attached. Where charging is needed, RAM offers powered versions such as \u003ca href=\"\/en\/products\/ram-mounts-powered-dock-for-zebra-et80-et85-ram-hol-ze22pu\"\u003eRAM-HOL-ZE22PU\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-HOL-ZE22U\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eForm-fit holder for Zebra ET8x\u003c\/strong\u003e – spring-loaded, non-powered, non-locking\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eSide bracket\u003c\/strong\u003e – for accessory mounting\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" and 2× #8-32 x 1\/2\" machine screws, 6× #8-32 nyloc nuts, 4× #10-24 x 5\/8\" machine screws, 4× #10-24 nyloc nuts\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eZip ties\u003c\/strong\u003e – 8× 102 mm (4\") and 2× 178 mm (7\") zip ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Mount it with a \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-c-size-ram-2461u\"\u003eC-size VESA 75 plate\u003c\/a\u003e or a \u003ca href=\"\/en\/products\/ram-mounts-75-x-75-mm-vesa-plate-with-ball-d-size-ram-d-2461u\"\u003eD-size VESA 75 plate\u003c\/a\u003e and an arm such as the \u003ca href=\"\/en\/products\/ram-mounts-double-socket-arm-c-size-medium-145-mm-ram-201u\"\u003emedium C-size arm\u003c\/a\u003e. A \u003ca href=\"\/en\/products\/ram-mounts-diamond-ball-base-with-2-hole-amps-pattern-b-size-ram-b-238u\"\u003eB-size diamond base\u003c\/a\u003e on the 2-hole plate holds a phone or scanner next to the tablet.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring-loaded form fit\u003c\/strong\u003e – holds the ET8x with or without Rugged Frame, keyboard attached or not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for climate modules\u003c\/strong\u003e – two rear housings accept RAM Vent-Temp, Temp-Right or an NFC Repeater module (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom for grips\u003c\/strong\u003e – space behind the tablet for GDS Hand-Stand or Roto-Mag and for the Zebra Expansion Back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory plate\u003c\/strong\u003e – built-in 2-hole plate for a RAM diamond base – phone, scanner or NFC Repeater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard RAM mounting\u003c\/strong\u003e – AMPS 4-hole 30 × 38 mm and VESA 75 × 75 mm on the back\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThrough a Nordic winter\u003c\/h2\u003e\n\u003cp\u003eTwo housings on the back of the holder take RAM's optional temperature modules: Temp-Right helps in very cold conditions, and Vent-Temp uses the air-conditioning outlets to bring warm or cool air to the tablet. Both are sold separately and fit into the holder rather than hanging off the mount.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZebra ET8x 2-in-1 tablets, with or without Rugged Frame\u003c\/li\u003e\n\u003cli\u003eZebra Friction Hinge Rugged Keyboard (optional)\u003c\/li\u003e\n\u003cli\u003eGDS Ergo accessories (Hand-Stand, Roto-Mag) and the Zebra Expansion Back\u003c\/li\u003e\n\u003cli\u003eRAM Vent-Temp, Temp-Right and NFC Repeater modules\u003c\/li\u003e\n\u003cli\u003eRAM bases with AMPS 4-hole or VESA 75 × 75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-HOL-ZE22U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eZebra ET8x 2-in-1 tablet, with or without Rugged Frame; Friction Hinge Rugged Keyboard supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eNone (non-powered holder)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003eAMPS 4-hole 30 × 38 mm (1.181\" × 1.496\"); VESA 75 × 75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eH 301 mm (11.85\") × W 323.9 mm (12.75\") × D 110.7 mm (4.36\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.03 kg (2.26 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eForm-fit holder, side bracket, mounting hardware, 10 zip ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eNeed ET8x holders for a mixed fleet where only some vehicles charge in the cradle? As an Official RAM Mounts Reseller we can combine powered and non-powered versions in one order.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839670026,"sku":"ramet8tab","price":254.27,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-HOL-ZE22U_1.jpg?v=1792006563"},{"product_id":"ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u","title":"RAM Mounts GDS Hardwire Charger, 10–30 V In, 12 V DC Out, 5.5 mm Plug (RAM-GDS-CHARGE-V10U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts GDS 12 V Hardwire Charger\u003c\/strong\u003e (RAM-GDS-CHARGE-V10U) connects a 12 V dock to the electrical system of a car, van or truck. It accepts 10–30 V DC and gives the dock a regulated 12 V through a 5.5 mm barrel plug. For electric forklifts with higher system voltage, the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2060-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v9u\"\u003e20–60 V version\u003c\/a\u003e is the match.\u003c\/p\u003e\n\u003cp\u003eNeed a different output from the same vehicle supply? RAM's 10–32 V family also covers \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1032-v-in-9-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v17u\"\u003e9 V\u003c\/a\u003e, \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1032-v-in-14-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v19u\"\u003e14 V\u003c\/a\u003e and \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1032-v-in-19-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v11u\"\u003e19 V\u003c\/a\u003e docks.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers cars, vans and trucks\u003c\/strong\u003e – the 10–30 V DC input works from typical road-vehicle supplies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V regulated output\u003c\/strong\u003e – 12 V DC within ±300 mV, up to 3.5 A, for docks with a 12 V DC input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugs straight into the dock\u003c\/strong\u003e – male 5.5 mm OD × 2.5 mm ID barrel plug on a short 0.2 m (7.9\") lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular wiring\u003c\/strong\u003e – a flat two-pole connector on the 1.2 m (3.9 ft) input lead lets you swap the charger without re-running cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather and fault protection\u003c\/strong\u003e – IP66, moisture resistant, 3 A inline ATC fuse, over-voltage, short-circuit and reverse-polarity protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM and GDS docks with a 5.5 mm DC power input rated for 12 V DC\u003c\/li\u003e\n\u003cli\u003eVehicles and forklifts with a 10–30 V DC supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-V10U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e10–30 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e12 V DC (±300 mV), 3.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDock Connector\u003c\/th\u003e\n\u003ctd\u003eMale barrel plug, 5.5 mm OD × 2.5 mm ID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Lead\u003c\/th\u003e\n\u003ctd\u003e1.2 m (3.9 ft) with 2-pole flat marine connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Lead\u003c\/th\u003e\n\u003ctd\u003e0.2 m (7.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−10 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage Temperature\u003c\/th\u003e\n\u003ctd\u003e−40 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eOver-voltage, short-circuit, reverse-polarity; SAE J-1113-5 load dump; moisture resistant; IP66; 3 A inline ATC fuse; 18 AWG copper wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eFCC, CE, UKCA, IC; RoHS, WEEE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eE-Mark, RCM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.14 kg (0.31 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eHardwire charger with input and output leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eStandardising docks across a van or service fleet? We are an Official RAM Mounts Reseller and keep the 12 V charger and matching docks in our range, with volume pricing for multi-vehicle rollouts.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839768330,"sku":"ramgds2","price":67.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-CHARGE-V10U_1.jpg?v=1792002725"},{"product_id":"ram-mounts-intelliskin-next-gen-protective-sleeve-for-samsung-galaxy-tab-s9-s9-fe-s10-fe-s10-lite-ram-gds-skin-sam86-ng","title":"RAM Mounts IntelliSkin Next Gen Sleeve for Samsung Galaxy Tab S9, S9 FE, S10 FE \u0026 S10 Lite (RAM-GDS-SKIN-SAM86-NG)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts IntelliSkin Next Gen for Galaxy Tab S9, S9 FE, S10 FE and S10 Lite\u003c\/strong\u003e (RAM-GDS-SKIN-SAM86-NG) turns Samsung's everyday Tab S tablets into devices that can live in a GDS dock. The sleeve wraps the tablet in a polycarbonate shell with a rubber layer, carries its own pogo pads on the bottom edge and leaves an opening for a headphone cable. For the larger plus models, take \u003ca href=\"\/en\/products\/ram-mounts-intelliskin-next-gen-protective-sleeve-for-samsung-galaxy-tab-s10-s9-s9-fe-ram-gds-skin-sam87-ng\"\u003ethe S10+ \/ S9+ sleeve\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-GDS-SKIN-SAM86-NG\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eIntelliSkin Next Gen sleeve\u003c\/strong\u003e – for Galaxy Tab S9, S9 FE, S10 FE and S10 Lite\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eUSB-C caps\u003c\/strong\u003e – 4 optional caps for the external port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 No dock in the van yet? A \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-1030-v-input-ram-gds-charge-v21cu\"\u003e10–30 V USB-C Power Delivery hardwire charger\u003c\/a\u003e plugs into the sleeve's USB-C port; the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-9-v-non-pd-1030-v-input-ram-gds-charge-v7cu\"\u003estandard 10–30 V USB-C charger\u003c\/a\u003e fits too.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour tablets, one sleeve\u003c\/strong\u003e – fits the Galaxy Tab S9, S9 FE, S10 FE and S10 Lite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone cable access\u003c\/strong\u003e – an extra cut-out leaves room for an audio jack plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocks through pads\u003c\/strong\u003e – GDS contacts moulded into the sleeve carry power and data, at up to USB 3.1 (5 Gbps) in a suitable dock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C fallback\u003c\/strong\u003e – external USB-C 2.0 port, with four optional caps to keep it clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgrade path for vehicle docks\u003c\/strong\u003e – positioning marker for Next Gen docks; existing GDS vehicle docks accept new docking cups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSamsung Galaxy Tab S9, Tab S9 FE, Tab S10 FE, Tab S10 Lite\u003c\/li\u003e\n\u003cli\u003eIntelliSkin Next Gen docks; GDS vehicle docks with Next Gen docking cups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-SKIN-SAM86-NG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eSamsung Galaxy Tab S9, S9 FE, S10 FE, S10 Lite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eGDS D Shape pogo pads; external USB-C 2.0 port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData Transfer\u003c\/th\u003e\n\u003ctd\u003eUp to USB 3.1 (5 Gbps) via D Shape contacts; up to USB 2.0 (480 Mbps) via external USB-C port (actual speed depends on dock, charger and device)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003ePolycarbonate and thermoplastic elastomers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.35 kg (0.77 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eIntelliSkin Next Gen sleeve, 4 optional USB-C caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eBringing Galaxy Tab S tablets into service vans or onto warehouse desks? As an Official RAM Mounts Reseller we put sleeves, docks and chargers together in a single project quote.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839833866,"sku":"ramgds20","price":159.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-SKIN-SAM86-NG_1.jpg?v=1792004949"},{"product_id":"ram-mounts-gds-tough-dock-for-samsung-tab-s7-s9-s9-fe-s10-fe-s10-lite-ram-gds-dock-sam76cpu","title":"RAM Mounts GDS Tough-Dock for Samsung Galaxy Tab S7 11\", S9, S9 FE, S10 FE \u0026 S10 Lite, USB-C Power (RAM-GDS-DOCK-SAM76CPU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts charge-only Tough-Dock for Galaxy Tab S7 11\", S9 and S10 FE\/Lite\u003c\/strong\u003e (RAM-GDS-DOCK-SAM76CPU) keeps one of five Galaxy Tab S models – S7 11\", S9, S9 FE, S10 FE or S10 Lite – powered in the vehicle. The tablet stays in its IntelliSkin Next Gen sleeve, drops into the spring-loaded cradle and picks up power through pogo pins, so nobody has to find the charging port at every stop. A single USB-C socket on the bottom cup feeds up to 60 W.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-GDS-DOCK-SAM76CPU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTough-Dock body for Tab S7 11\"\/S9\/S9 FE\/S10 FE\/S10 Lite\u003c\/strong\u003e – RAM-GDS-DOCKB-SAM76U\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eTop latch\u003c\/strong\u003e – holds the top edge of the sleeved tablet (\u003ca href=\"\/en\/products\/ram-mounts-gds-tough-dock-cool-dock-top-latch-non-locking-ram-gds-dockh2u\"\u003eRAM-GDS-DOCKH2U\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003ePowered dock cup\u003c\/strong\u003e – 8 pogo pins, USB-C input (\u003ca href=\"\/en\/products\/ram-mounts-gds-powered-dock-cup-for-intelliskin-next-gen-tablets-8-pin-usb-c-ram-gds-dock-v10pu\"\u003eRAM-GDS-DOCK-V10PU\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eGDS USB Type-C 2.0 cable\u003c\/strong\u003e – \u003ca href=\"\/en\/products\/ram-mounts-gds-usb-a-to-usb-c-2-0-cable-1-m-ram-gds-cab-usbc-amcmu-1\"\u003eRAM-GDS-CAB-USBC-AMCMU-1\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eCable clamp for USB-C cables\u003c\/strong\u003e – \u003ca href=\"\/en\/products\/ram-mounts-gds-cable-clamp-for-micro-usb-usb-c-cables-ram-gds-cab-clamp1u\"\u003eRAM-GDS-CAB-CLAMP1U\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eMounting hardware\u003c\/strong\u003e – 4× #8-32 x 5\/8\" machine screws, 4× #8-32 nyloc nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Wire it to the vehicle with the RAM USB-C hardwire charger \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-1030-v-input-ram-gds-charge-v21cu\"\u003eRAM-GDS-CHARGE-V21CU\u003c\/a\u003e for 10–30 V systems (\u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-3060-v-input-ram-gds-charge-v22cu\"\u003eRAM-GDS-CHARGE-V22CU\u003c\/a\u003e for 30–60 V systems such as forklifts). Tablets that rotate to the office can charge on the \u003ca href=\"\/en\/products\/ram-mounts-gds-6-port-power-delivery-desktop-charger-for-intelliskin-next-gen-ram-gds-dock-6g1pd-ngu\"\u003e6-port desktop charger for IntelliSkin Next Gen\u003c\/a\u003e. To mount it, add a 4-hole AMPS ball adapter: \u003ca href=\"\/en\/products\/ram-mounts-ball-adapter-with-amps-plate-b-size-ram-b-347u\"\u003eRAM-B-347U\u003c\/a\u003e (B-size) or \u003ca href=\"\/en\/products\/ram-mounts-ball-adapter-with-amps-plate-c-size-ram-347u\"\u003eRAM-347U\u003c\/a\u003e (C-size).\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePogo-pin charging\u003c\/strong\u003e – contacts in the bottom cup charge the tablet as soon as it is seated – no plug to line up\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 60 W\u003c\/strong\u003e – 5–20 V at 3 A through the USB-C input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive tablets, one body\u003c\/strong\u003e – shaped for the Tab S7 11\", S9, S9 FE, S10 FE and S10 Lite inside an IntelliSkin Next Gen sleeve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-hole AMPS on the back\u003c\/strong\u003e – 30 × 38 mm pattern for a RAM ball adapter, arm and base of your choice\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Stand ready\u003c\/strong\u003e – works with the GDS Hand-Stand hand strap and kickstand attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSamsung Galaxy Tab S7 11\", Tab S9, Tab S9 FE, Tab S10 FE and Tab S10 Lite, each inside an IntelliSkin Next Gen sleeve (not included)\u003c\/li\u003e\n\u003cli\u003eRAM ball adapters and other mounts with the 4-hole AMPS pattern, 30 × 38 mm\u003c\/li\u003e\n\u003cli\u003eGDS Hand-Stand hand strap and kickstand attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-DOCK-SAM76CPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-DOCKB-SAM76U body, RAM-GDS-DOCKH2U top latch, RAM-GDS-DOCK-V10PU powered cup, RAM-GDS-CAB-USBC-AMCMU-1 cable, RAM-GDS-CAB-CLAMP1U cable clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003ctd\u003eSamsung Galaxy Tab S7 11\", Tab S9, Tab S9 FE, Tab S10 FE and Tab S10 Lite inside an IntelliSkin Next Gen sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase Required\u003c\/th\u003e\n\u003ctd\u003eIntelliSkin Next Gen sleeve, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eUSB-C input; 5–20 V @ 3 A, up to 60 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData \/ Peripherals\u003c\/th\u003e\n\u003ctd\u003eCharging only, no data or peripheral ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Pattern\u003c\/th\u003e\n\u003ctd\u003e4-hole AMPS 30 × 38 mm (1.181\" × 1.496\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eHigh-strength composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Type\u003c\/th\u003e\n\u003ctd\u003eRAM ball adapter with 4-hole AMPS pattern (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.64 kg (1.40 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eTough-Dock body for Galaxy Tab S7 11\"\/S9\/S9 FE\/S10 FE\/S10 Lite (RAM-GDS-DOCKB-SAM76U), top latch (RAM-GDS-DOCKH2U), powered dock cup with USB-C input (RAM-GDS-DOCK-V10PU), GDS USB Type-C 2.0 cable (RAM-GDS-CAB-USBC-AMCMU-1), cable clamp (RAM-GDS-CAB-CLAMP1U), 4× #8-32 x 5\/8\" machine screws, 4× #8-32 nyloc nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eHanding Galaxy Tab S9 or S10 FE tablets to a team of drivers? We are an Official RAM Mounts Reseller and put together docks, IntelliSkin sleeves and mounting parts per vehicle in one order.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188839866634,"sku":"ramgds21","price":218.01,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-DOCK-SAM76CPU_1.jpg?v=1792003290"},{"product_id":"ram-mounts-gds-hardwire-charger-1032-v-in-19-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v11u","title":"RAM Mounts GDS Hardwire Charger, 10–32 V In, 19 V DC Out, 5.5 mm Plug (RAM-GDS-CHARGE-V11U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts GDS 19 V Hardwire Charger\u003c\/strong\u003e (RAM-GDS-CHARGE-V11U) is for docks that ask for 19 V rather than the more common 12 V. It is wired to a 10–32 V vehicle supply and delivers 19 V at up to 3.5 A through a male 5.5 mm barrel plug, in cars, trucks and forklifts alike.\u003c\/p\u003e\n\u003cp\u003eOn forklifts above 32 V, the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2460-v-in-19-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v12u\"\u003e24–60 V version\u003c\/a\u003e gives the same 19 V. For 12 V docks, use \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u\"\u003eRAM-GDS-CHARGE-V10U\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e19 V output\u003c\/strong\u003e – 19 V DC (±300 mV) at up to 3.5 A for docks with a 19 V input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10–32 V DC input\u003c\/strong\u003e – runs from 12 V and 24 V vehicle electrical systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 5.5 mm dock inputs\u003c\/strong\u003e – male barrel plug, 5.5 mm OD × 2.5 mm ID, on a 0.2 m (7.9\") lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisconnects at the harness\u003c\/strong\u003e – flat two-pole marine connector on the 1.2 m (3.9 ft) input lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated IP66\u003c\/strong\u003e – moisture resistant, 3 A inline ATC fuse, protection against over-voltage, short circuit, reverse polarity and load dump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM and GDS docks with a 5.5 mm DC input that require 19 V DC\u003c\/li\u003e\n\u003cli\u003eCars, trucks and forklifts with a 10–32 V DC supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-V11U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e10–32 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e19 V DC (±300 mV), 3.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDock Connector\u003c\/th\u003e\n\u003ctd\u003eMale barrel plug, 5.5 mm OD × 2.5 mm ID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Lead\u003c\/th\u003e\n\u003ctd\u003e1.2 m (3.9 ft) with 2-pole flat marine connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Lead\u003c\/th\u003e\n\u003ctd\u003e0.2 m (7.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−10 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage Temperature\u003c\/th\u003e\n\u003ctd\u003e−40 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eOver-voltage, short-circuit, reverse-polarity; SAE J-1113-5 load dump; moisture resistant; IP66; 3 A inline ATC fuse; 18 AWG copper wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eFCC, CE, UKCA, IC; RoHS, WEEE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eE-Mark, RCM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.14 kg (0.31 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eHardwire charger with input and output leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMixing 12 V and 19 V docks across one fleet? As an Official RAM Mounts Reseller we help you pick the right charger per dock and supply the full set in one order.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188840259850,"sku":"ramgds8","price":69.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-CHARGE-V11U_1.jpg?v=1792002730"},{"product_id":"ram-mounts-gds-hardwire-charger-1032-v-in-9-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v17u","title":"RAM Mounts GDS Hardwire Charger, 10–32 V In, 9 V DC Out, 5.5 mm Plug (RAM-GDS-CHARGE-V17U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts GDS 9 V Hardwire Charger\u003c\/strong\u003e (RAM-GDS-CHARGE-V17U) is the lowest-voltage member of RAM's 5.5 mm charger family. Wired to a car, van or truck supply between 10 and 32 V, it gives 9 V at up to 3.5 A – for docks whose input is rated at 9 V.\u003c\/p\u003e\n\u003cp\u003eSame dock on a forklift with a 24–60 V supply? Use \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2460-v-in-9-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v18u\"\u003eRAM-GDS-CHARGE-V18U\u003c\/a\u003e. For 12 V docks, choose \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u\"\u003eRAM-GDS-CHARGE-V10U\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 V output\u003c\/strong\u003e – 9 V DC at up to 3.5 A for docks with a 9 V input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide vehicle input\u003c\/strong\u003e – 10–32 V DC covers 12 V and 24 V road vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarrel plug\u003c\/strong\u003e – male 5.5 mm OD × 2.5 mm ID, on a 0.2 m (7.9\") lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular harness\u003c\/strong\u003e – 1.2 m (3.9 ft) input lead with flat two-pole marine connector for tool-free disconnection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection built in\u003c\/strong\u003e – over-voltage, short-circuit, reverse-polarity and SAE J-1113-5 load-dump protection; moisture resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM and GDS docks with a 5.5 mm DC input that require 9 V DC\u003c\/li\u003e\n\u003cli\u003eCars, vans and trucks with a 10–32 V DC supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-V17U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e10–32 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e9 V DC, 3.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDock Connector\u003c\/th\u003e\n\u003ctd\u003eMale barrel plug, 5.5 mm OD × 2.5 mm ID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Lead\u003c\/th\u003e\n\u003ctd\u003e1.2 m (3.9 ft) with 2-pole flat marine connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Lead\u003c\/th\u003e\n\u003ctd\u003e0.2 m (7.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−10 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage Temperature\u003c\/th\u003e\n\u003ctd\u003e−40 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eOver-voltage, short-circuit, reverse-polarity; SAE J-1113-5 load dump; moisture resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eFCC, CE, UKCA, IC; RoHS, WEEE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eRCM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.15 kg (0.32 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eHardwire charger with input and output leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eKeeping spares for docks that run on 9 V? As an Official RAM Mounts Reseller we stock the less common outputs too and quote quantities for service teams.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188840325386,"sku":"ramgds9","price":54.03,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-CHARGE-V17U_1.jpg?v=1792002765"},{"product_id":"ram-mounts-gds-modular-1030-v-hardwire-charger-with-usb-a-port-usb-a-to-dc-cable-ram-gds-charge-m55-v7b1u","title":"RAM Mounts GDS Modular 10–30 V Hardwire Charger with USB-A to DC Cable (RAM-GDS-CHARGE-M55-V7B1U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts GDS Modular 10–30 V Hardwire Charger with USB-A to DC Cable\u003c\/strong\u003e (RAM-GDS-CHARGE-M55-V7B1U) pairs the USB-A charger \u003ca href=\"\/en\/products\/ram-mounts-gds-modular-hardwire-charger-with-usb-a-socket-10-30-v-in-ram-gds-charge-v7b1u\"\u003eRAM-GDS-CHARGE-V7B1U\u003c\/a\u003e with a 1.5 m cable that ends in a DC barrel plug. The result is a complete feed for a dock or device that takes 5 V through a DC barrel input. Because the cable plugs into a USB-A socket, it can be swapped later without opening the vehicle wiring.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-GDS-CHARGE-M55-V7B1U\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eModular hardwire charger, 10–30 V\u003c\/strong\u003e – \u003ca href=\"\/en\/products\/ram-mounts-gds-modular-hardwire-charger-with-usb-a-socket-10-30-v-in-ram-gds-charge-v7b1u\"\u003eRAM-GDS-CHARGE-V7B1U\u003c\/a\u003e – female USB-A socket, 5–9 V at 2.5 A, 1.2 m input lead with flat two-pole connector\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eUSB-A to DC barrel cable\u003c\/strong\u003e – 1.5 m (4.9 ft), male USB-A to male DC barrel (\u003ca href=\"\/en\/products\/ram-mounts-gds-usb-a-to-dc-barrel-cable-1-5-m-ram-gds-cab-usba-dc-1u\"\u003eRAM-GDS-CAB-USBA-DC-1U\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Spare or longer runs: the \u003ca href=\"\/en\/products\/ram-mounts-gds-usb-a-to-dc-barrel-cable-1-5-m-ram-gds-cab-usba-dc-1u\"\u003eUSB-A to DC cable\u003c\/a\u003e is sold separately. Trucks with a 30–64 V supply need the \u003ca href=\"\/en\/products\/ram-mounts-gds-modular-3064-v-hardwire-charger-with-usb-a-port-usb-a-to-dc-cable-ram-gds-charge-m55-v8bu\"\u003e30–64 V kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete set\u003c\/strong\u003e – charger and USB-A to DC barrel cable in one part number\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 V device charging\u003c\/strong\u003e – 5–9 V DC output at up to 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V and 24 V vehicles\u003c\/strong\u003e – 10–30 V DC input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable changes, wiring stays\u003c\/strong\u003e – the DC cable unplugs from the USB-A socket; the charger unplugs at its flat two-pole connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e – over-voltage, short-circuit, reverse-polarity and SAE J-1113-5 load-dump protection; moisture resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDocks and devices with a DC barrel input that charge at 5 V, up to 2.5 A\u003c\/li\u003e\n\u003cli\u003eVehicles with a 10–30 V DC supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-M55-V7B1U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-V7B1U charger, RAM-GDS-CAB-USBA-DC-1U cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e10–30 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e5–9 V DC, 2.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Connector\u003c\/th\u003e\n\u003ctd\u003eMale DC barrel plug on 1.5 m (4.9 ft) USB-A cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Lead\u003c\/th\u003e\n\u003ctd\u003e1.2 m (3.9 ft) with 2-pole flat marine connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−10 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage Temperature\u003c\/th\u003e\n\u003ctd\u003e−40 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eOver-voltage, short-circuit, reverse-polarity; SAE J-1113-5 load dump; moisture resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eFCC, CE, UKCA, IC; RoHS, WEEE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eE-Mark, RCM, IEC\/UL 62368-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.20 kg (0.43 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eHardwire charger with USB-A socket, USB-A to DC barrel cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eOrdering a charging set for every van in the fleet? As an Official RAM Mounts Reseller we ship complete kits per vehicle and quote volume pricing.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188840390922,"sku":"ramgdscha-2","price":68.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-CHARGE-M55-V7B1U_1.jpg?v=1792002700"},{"product_id":"ram-mounts-gds-modular-3064-v-hardwire-charger-with-usb-a-port-usb-a-to-dc-cable-ram-gds-charge-m55-v8bu","title":"RAM Mounts GDS Modular 30–64 V Hardwire Charger with USB-A to 5.5 mm DC Cable (RAM-GDS-CHARGE-M55-V8BU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts GDS 30–64 V Charger Kit with 5.5 mm DC Cable\u003c\/strong\u003e (RAM-GDS-CHARGE-M55-V8BU) combines \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-female-usb-a-3064-v-input-ram-gds-charge-v8bu\"\u003eRAM-GDS-CHARGE-V8BU\u003c\/a\u003e with a 1.5 m USB-A to DC barrel cable. It is meant for forklifts and other vehicles with a 30–64 V supply, where a dock or device takes 5 V through a 5.5 mm DC input. The 10–30 V edition of the same set is \u003ca href=\"\/en\/products\/ram-mounts-gds-modular-1030-v-hardwire-charger-with-usb-a-port-usb-a-to-dc-cable-ram-gds-charge-m55-v7b1u\"\u003eRAM-GDS-CHARGE-M55-V7B1U\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-GDS-CHARGE-M55-V8BU\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eModular hardwire charger, 30–64 V\u003c\/strong\u003e – \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-female-usb-a-3064-v-input-ram-gds-charge-v8bu\"\u003eRAM-GDS-CHARGE-V8BU\u003c\/a\u003e – female USB-A socket, 5–9 V at 2.5 A, 1.2 m input lead with flat two-pole connector\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eUSB-A to DC barrel cable\u003c\/strong\u003e – 1.5 m (4.9 ft), male USB-A to male 5.5 mm DC (\u003ca href=\"\/en\/products\/ram-mounts-gds-usb-a-to-dc-barrel-cable-1-5-m-ram-gds-cab-usba-dc-1u\"\u003eRAM-GDS-CAB-USBA-DC-1U\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 Spare cables are available as \u003ca href=\"\/en\/products\/ram-mounts-gds-usb-a-to-dc-barrel-cable-1-5-m-ram-gds-cab-usba-dc-1u\"\u003eRAM-GDS-CAB-USBA-DC-1U\u003c\/a\u003e. For USB-C devices on the same trucks, the \u003ca href=\"\/en\/products\/ram-mounts-gds-modular-30-64-v-hardwire-charger-with-usb-a-to-usb-c-cable-ram-gds-charge-usbc-v8bu\"\u003ekit with USB-C cable\u003c\/a\u003e uses the same charger.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForklift voltage\u003c\/strong\u003e – 30–64 V DC input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharger and cable in one\u003c\/strong\u003e – USB-A socket charger plus 1.5 m USB-A to 5.5 mm DC cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 V output\u003c\/strong\u003e – 5–9 V DC at up to 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo disconnect points\u003c\/strong\u003e – USB-A socket on the output, flat two-pole marine connector on the 1.2 m (3.9 ft) input lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected\u003c\/strong\u003e – over-voltage, short-circuit, reverse-polarity and SAE J-1113-5 load-dump protection; moisture resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOn the forklift\u003c\/h2\u003e\n\u003cp\u003eThe charger is wired to the truck once. When the dock or terminal is replaced, the cable comes out of the USB-A socket, or the whole charger unplugs at its flat two-pole connector – the truck's wiring stays as it is.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDocks and devices with a 5.5 mm DC input that charge at 5 V, up to 2.5 A\u003c\/li\u003e\n\u003cli\u003eForklifts and vehicles with a 30–64 V DC supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-M55-V8BU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-V8BU charger, RAM-GDS-CAB-USBA-DC-1U cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e30–64 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e5–9 V DC, 2.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Connector\u003c\/th\u003e\n\u003ctd\u003eMale 5.5 mm DC plug on 1.5 m (4.9 ft) USB-A cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Lead\u003c\/th\u003e\n\u003ctd\u003e1.2 m (3.9 ft) with 2-pole flat marine connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−10 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage Temperature\u003c\/th\u003e\n\u003ctd\u003e−40 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eOver-voltage, short-circuit, reverse-polarity; SAE J-1113-5 load dump; moisture resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eFCC, CE, UKCA, IC; RoHS, WEEE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eE-Mark, RCM, IEC\/UL 62368-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.19 kg (0.42 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eHardwire charger with USB-A socket, USB-A to 5.5 mm DC cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eKitting out a fleet of electric forklifts? As an Official RAM Mounts Reseller we deliver one complete charging set per truck and quote the project as a whole.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188840423690,"sku":"ramgdscha-3","price":71.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-CHARGE-M55-V8BU_1.jpg?v=1792002704"},{"product_id":"ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-1030-v-input-ram-gds-charge-v21cu","title":"RAM Mounts GDS Modular USB-C Power Delivery Hardwire Charger 25 W, 10–30 V In (RAM-GDS-CHARGE-V21CU)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts GDS 25 W USB-C Power Delivery Hardwire Charger\u003c\/strong\u003e (RAM-GDS-CHARGE-V21CU) gives USB-C docks and devices Power Delivery charging straight from a 10–30 V vehicle supply. It negotiates 5–12 V, up to 25 W, through a fitted 1 m USB-C cable – a step up from the non-PD \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-9-v-non-pd-1030-v-input-ram-gds-charge-v7cu\"\u003eRAM-GDS-CHARGE-V7CU\u003c\/a\u003e, and below the 45 W \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-45-w-1030-v-input-ram-gds-charge-v3c-3u\"\u003eRAM-GDS-CHARGE-V3C-3U\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNeed more power for a larger tablet? The \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-45-w-1030-v-input-ram-gds-charge-v3c-3u\"\u003e45 W PD charger\u003c\/a\u003e goes up to 15 V at 3 A. For 30–60 V supplies, the 25 W equivalent is \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-usb-c-pd-25-w-3060-v-input-ram-gds-charge-v22cu\"\u003eRAM-GDS-CHARGE-V22CU\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Power Delivery\u003c\/strong\u003e – negotiates 5–12 V DC, up to 25 W and 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitted USB-C cable\u003c\/strong\u003e – 1 m (3.3 ft) male USB-C on the output side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact input lead\u003c\/strong\u003e – 0.2 m (7.9\") bare-wire lead to the vehicle supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold-start range\u003c\/strong\u003e – operates from −20 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected output\u003c\/strong\u003e – over-voltage, over-current, short-circuit and SAE J-1113-5a load-dump protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB-C devices and RAM or GDS USB-C docks with Power Delivery charging\u003c\/li\u003e\n\u003cli\u003eVehicles with a 10–30 V DC supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-V21CU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e10–30 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003eUSB Power Delivery, 5–12 V DC, 25 W, 2.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Connector\u003c\/th\u003e\n\u003ctd\u003eMale USB-C on 1 m (3.3 ft) cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Lead\u003c\/th\u003e\n\u003ctd\u003e0.2 m (7.9\"), bare wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−20 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage Temperature\u003c\/th\u003e\n\u003ctd\u003e−40 °C to +85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eOver-voltage, over-current, short-circuit; SAE J-1113-5a load dump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eRoHS, WEEE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eFCC, CSA, CE, UKCA, RCM, e-Mark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.20 kg (0.45 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003ePD hardwire charger with USB-C cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMoving a fleet from micro-USB to USB-C devices? As an Official RAM Mounts Reseller we pair PD chargers with the right USB-C docks and quote for the full changeover.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188840456458,"sku":"ramgdscha-5","price":95.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-CHARGE-V21CU_1.jpg?v=1792002789"},{"product_id":"ram-mounts-gds-hardwire-charger-1032-v-in-14-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v19u","title":"RAM Mounts GDS Hardwire Charger, 10–32 V In, 14 V DC Out, 5.5 mm Plug (RAM-GDS-CHARGE-V19U)","description":"\u003cp\u003e\u003cstrong\u003eRAM Mounts GDS 14 V Hardwire Charger\u003c\/strong\u003e (RAM-GDS-CHARGE-V19U) supplies docks rated at 14 V from any 10–32 V source in a car, truck or forklift. A 3 A inline ATC fuse and 18 AWG copper wire are part of the build, and the input lead unplugs at a flat two-pole connector for later upgrades.\u003c\/p\u003e\n\u003cp\u003eFor trucks with up to 60 V, the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-2060-v-in-14-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v20u\"\u003e20–60 V version\u003c\/a\u003e has the same 14 V output. 12 V docks pair with \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-1030-v-in-12-v-out-male-5-5-mm-dc-plug-ram-gds-charge-v10u\"\u003eRAM-GDS-CHARGE-V10U\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 V output\u003c\/strong\u003e – 14 V DC at up to 3.5 A for docks that specify 14 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10–32 V DC input\u003c\/strong\u003e – fits cars, trucks and forklifts within that range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFused input\u003c\/strong\u003e – 3 A inline ATC fuse with 18 AWG copper wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard dock plug\u003c\/strong\u003e – male 5.5 mm OD × 2.5 mm ID barrel on a 0.2 m (7.9\") lead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgrade without rewiring\u003c\/strong\u003e – the 1.2 m (3.9 ft) input lead ends in a flat two-pole marine connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRAM and GDS docks with a 5.5 mm DC input that require 14 V DC\u003c\/li\u003e\n\u003cli\u003eCars, trucks and forklifts with a 10–32 V DC supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-V19U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e10–32 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e14 V DC, 3.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDock Connector\u003c\/th\u003e\n\u003ctd\u003eMale barrel plug, 5.5 mm OD × 2.5 mm ID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Lead\u003c\/th\u003e\n\u003ctd\u003e1.2 m (3.9 ft) with 2-pole flat marine connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Lead\u003c\/th\u003e\n\u003ctd\u003e0.2 m (7.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e−10 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage Temperature\u003c\/th\u003e\n\u003ctd\u003e−40 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eOver-voltage, short-circuit, reverse-polarity; SAE J-1113-5 load dump; moisture resistant; 3 A inline ATC fuse; 18 AWG copper wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eFCC, CE, UKCA, IC; RoHS, WEEE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.14 kg (0.31 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eHardwire charger with input and output leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003ePlanning a dock rollout for delivery trucks or yard vehicles? As an Official RAM Mounts Reseller we supply the 14 V charger together with docks and mounts, priced per project.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188840816906,"sku":"ramgdscha-6","price":53.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-CHARGE-V19U_1.jpg?v=1792002777"},{"product_id":"ram-mounts-qi2-15w-wireless-charger-ip67-magsafe-compatible-ram-gds-charge-w2m","title":"RAM Mounts Qi2 15 W Wireless Charger, IP67 Waterproof, Magnetic Alignment (RAM-GDS-CHARGE-W2M)","description":"\u003cp\u003e\u003cstrong\u003eRAM Qi2 15 W Wireless Charger\u003c\/strong\u003e (RAM-GDS-CHARGE-W2M) is a sealed magnetic charging pad: an iPhone 12 or newer lines up on it by itself and charges at up to 15 W. Rated IP67 and fitted with a braided USB-C lead, it is meant for open boats, work vehicles and other places where an ordinary desk charger would not last. RAM also builds it into complete mounts such as the \u003ca href=\"\/en\/products\/ram-mounts-ball-adapter-with-qi2-15-w-wireless-charger-for-magsafe-iphones-rap-b-202-ap-mag-1-w2mu\"\u003eball adapter with Qi2 charger\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/ram-mounts-quick-grip-pro-phone-holder-with-ball-qi2-15-w-wireless-charger-ram-hol-pd5b-w2mu\"\u003eQuick-Grip Pro with Qi2 charger\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ss-box\" style=\"border-radius:10px;padding:16px 20px;margin:20px 0;background:#f3faf4;\"\u003e\n\u003ch2 style=\"margin:0 0 10px;font-size:20px;line-height:1.3;color:#111;\"\u003e📦 What's in the box – RAM-GDS-CHARGE-W2M\u003c\/h2\u003e\n\u003cul style=\"list-style:none;padding-left:0;margin:0;\"\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eQi2 15 W wireless charger\u003c\/strong\u003e – with 1 m (3.3 ft) woven USB-C cable\u003c\/li\u003e\n\u003cli style=\"margin:6px 0;\"\u003e\n\u003csvg width=\"18\" height=\"18\" viewbox=\"0 0 24 24\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" aria-hidden=\"true\" style=\"display:inline-block;vertical-align:-4px;margin-right:4px;\"\u003e\u003cpath fill-rule=\"evenodd\" clip-rule=\"evenodd\" d=\"M1.25 12C1.25 17.9371 6.06294 22.75 12 22.75C17.9371 22.75 22.75 17.9371 22.75 12C22.75 6.06294 17.9371 1.25 12 1.25C6.06294 1.25 1.25 6.06294 1.25 12ZM16.6757 8.26285C17.0828 8.63604 17.1103 9.26861 16.7372 9.67573L11.2372 15.6757C11.0528 15.8768 10.7944 15.9938 10.5217 15.9998C10.249 16.0057 9.98576 15.9 9.79289 15.7071L7.29289 13.2071C6.90237 12.8166 6.90237 12.1834 7.29289 11.7929C7.68342 11.4024 8.31658 11.4024 8.70711 11.7929L10.4686 13.5544L15.2628 8.32428C15.636 7.91716 16.2686 7.88966 16.6757 8.26285Z\" fill=\"#1b5e20\"\u003e\u003c\/path\u003e\u003c\/svg\u003e \u003cstrong\u003eUSB-A adapter\u003c\/strong\u003e – for plugging the USB-C cable into a USB-A socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0;font-size:14px;color:#3d5a40;\"\u003e💡 In a vehicle, power it from the \u003ca href=\"\/en\/products\/ram-mounts-gds-modular-hardwire-charger-with-usb-a-socket-10-30-v-in-ram-gds-charge-v7b1u\"\u003e10–30 V hardwire charger with USB-A socket\u003c\/a\u003e, or the \u003ca href=\"\/en\/products\/ram-mounts-gds-hardwire-charger-female-usb-a-3064-v-input-ram-gds-charge-v8bu\"\u003e30–64 V version\u003c\/a\u003e on higher-voltage systems. Prefer a ready-made mount? The \u003ca href=\"\/en\/products\/ram-mounts-quick-grip-pro-xl-phone-holder-with-ball-qi2-15-w-wireless-charger-ram-hol-pd7b-w2mu\"\u003eQuick-Grip Pro XL with Qi2 charger\u003c\/a\u003e takes large phones.\u003c\/p\u003e\n\u003cp style=\"margin:14px 0 0;\"\u003e\u003ca href=\"#sp-accessories\" style=\"display:inline-block;padding:9px 18px;border-radius:6px;border:1.5px solid #2e7d32;background:transparent;color:#2e7d32;font-size:14px;font-weight:600;line-height:1.3;text-decoration:none;\"\u003eView accessories →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQi2 charging up to 15 W\u003c\/strong\u003e – MPP 15 W for Qi2 magnetic phones; EPP 7.5 W and BPP 5 W for other Qi devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLines up by magnet\u003c\/strong\u003e – magnetic alignment with MagSafe-compatible iPhone 12 and later, and with AirPods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed against water and dust\u003c\/strong\u003e – IP67-rated housing for decks, cabs and outdoor work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproved for vehicles\u003c\/strong\u003e – SAE J1455 and E-Mark, plus FCC, CE and RCM certification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected electronics\u003c\/strong\u003e – over-current, short-circuit and over-temperature protection; RoHS and WEEE compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes several USB sources\u003c\/strong\u003e – USB 5 V @ 3 A, Quick Charge 2.0 at 9 V or USB PD 2.0 at 5–15 V @ 2 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOn the water and on the road\u003c\/h2\u003e\n\u003cp\u003eThe pad is sealed to IP67, so spray on a boat console or rain through an open cab door does not reach the electronics. For road vehicles it carries SAE J1455 and E-Mark approval. Charging is specified between 0 °C and +40 °C, storage between −20 °C and +80 °C. In a car or truck, place the phone and charger outside airbag deployment areas.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApple iPhone 12 and later with magnetic alignment, plus AirPods\u003c\/li\u003e\n\u003cli\u003eFurther Qi phones on RAM's list, e.g. Apple iPhone 8–11, iPhone SE and iPhone Air; Samsung Galaxy S8–S26 and Note 8–10; Google Pixel 3–9a; selected Blackview, Cat, Huawei, LG, Nokia, Sony, Xiaomi and ZTE models\u003c\/li\u003e\n\u003cli\u003eUSB-C power sockets, or USB-A sockets with the included adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eRAM-GDS-CHARGE-W2M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWireless Output\u003c\/th\u003e\n\u003ctd\u003eQi2 MPP 15 W; EPP 7.5 W; BPP 5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003eUSB 5 V @ 3 A; QC 2.0 9 V @ 2.22 A; USB PD 2.0 5–15 V @ 2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable\u003c\/th\u003e\n\u003ctd\u003e1 m (3.3 ft) woven cable, USB-C male, with USB-A adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e80 % wireless power transfer or higher; 360 kHz; standby approx. 8 mA at 5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003e0 °C to +40 °C (storage −20 °C to +80 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eIP67, SAE J1455, FCC, CE, E-Mark, RCM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRegulatory\u003c\/th\u003e\n\u003ctd\u003eRoHS, WEEE; over-current, short-circuit and over-temperature protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07 kg (0.15 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the Box\u003c\/th\u003e\n\u003ctd\u003eQi2 wireless charger with 1 m USB-C cable, USB-A adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eAdding phone charging to a charter boat, a rescue RIB or a fleet of service vans? As an Official RAM Mounts Reseller we supply the charger on its own or already fitted to a RAM holder.\u003c\/p\u003e","brand":"RAM MOUNT","offers":[{"title":"Default Title","offer_id":53188840915210,"sku":"ramgdscha-8","price":69.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/1792\/6922\/files\/RAM-GDS-CHARGE-W2M_1.jpg?v=1792002859"}],"url":"https:\/\/scanshop.lv\/en\/collections\/ram-mounts-vehicle-mounts.oembed?page=71","provider":"SCANSHOP","version":"1.0","type":"link"}