

What's in the box – RAM-HOL-TAB3U
RAM Mounts Tab-Tite Tablet Holder for Apple iPad Gen 1–4 + More (RAM-HOL-TAB3U) is for iPads used without a bulky case. The cups were first sized for the original iPad generations, and RAM now also lists the iPad Air 4 and 5 and the iPad Pro 11" 1st to 4th generation. RAM builds this holder into 15 complete kits – the drill-down mount and the Twist-Lock suction cup mount among them – so buy it on its own when you already have the base and arm.
Add a B-size round plate and a medium arm, or the complete B-size double ball mount. Putting the iPads into cases later? Swap to the cups for iPads with case and keep the holder.
Key Features
- Sized for bare iPads – height 215.9–282.6 mm (8.5"–11.125"), width 162.1–196.9 mm (6.38"–7.75"), depth 3.3–14.2 mm (0.13"–0.56")
- Several iPad generations – RAM lists the iPad 3rd and 4th gen, iPad Air 4 and 5, and iPad Pro 11" 1st–4th gen
- Case-ready by swapping cups – the same backplate takes RAM-HOL-TAB17-CUPSU when the iPads go into protective cases
- Buttons and ports clear – the end cups leave the iPad's controls and connectors free to use
- AMPS 4-hole back – 30 × 38 mm (1.181" × 1.496") for B- and C-size RAM round ball bases
Compatibility
- Listed by RAM (without case): Apple iPad 3rd gen, iPad 4th gen, iPad Air 4, iPad Air 5, iPad Pro 11" 1st–4th gen
- Any tablet 215.9–282.6 mm tall, 162.1–196.9 mm wide and 3.3–14.2 mm deep
- RAM B- and C-size round ball bases with the AMPS 4-hole pattern
Technical Specifications
| Part Number | RAM-HOL-TAB3U |
|---|---|
| Kit Contents | RAM-HOL-ACU Tab-Tite backplate with hardware, RAM-HOL-TAB3-CUPSU end cups |
| Compatible Devices | Apple iPad 3rd and 4th gen, iPad Air 4 and 5, iPad Pro 11" 1st–4th gen (without case) |
| Device Size | Height 215.9–282.6 mm (8.5"–11.125"); width 162.1–196.9 mm (6.38"–7.75"); depth 3.3–14.2 mm (0.13"–0.56") |
| Hole Pattern | AMPS 4-hole, 30 × 38 mm (1.181" × 1.496") |
| Materials | High-strength composite |
| Hardware | 4× #8-32 x 5/8" and 4× #8-32 x 1/2" machine screws, 4× #8-32 nyloc nuts |
| Weight | 0.25 kg (0.55 lb) |
| In the Box | Tab-Tite backplate with iPad end cups, assembly hardware |
Need identical iPad holders in every vehicle or on every workstation? As an Official RAM Mounts Reseller we deliver holders, spare cups and mounting parts as one consistent set.
Complete RAM mounts with this part (15)
Every complete mount below includes this part.
Tab-Tite Drill-Down Mount for Apple iPad 1–4 & Similar Tablets, B-Size, Medium Arm
92,89 € +VATIn stock
Tab-Tite Suction Cup Mount for iPad, iPad Air 4/5 & iPad Pro 11", B-Size
108,77 € +VATIn stock
Tab-Tite Dual Suction Mount for iPad, iPad Air & iPad Pro 11", Extension Knob, B-Size
221,09 € +VATIn stock
Tab-Tite Pod I No-Drill Vehicle Mount for iPad and iPad Air, B-Size
159,00 € +VATIn stock
Tab-Tite Strap Hose Clamp Mount for iPad without Case, B-Size, Medium Arm
118,96 € +VATOut of stock
Tab-Tite Yoke Clamp Mount for Apple iPad Gen 1–4, B-Size, Medium Arm
121,33 € +VATOut of stock
Tab-Tite U-Bolt Rail Mount for Apple iPad, iPad Air & iPad Pro 11, B-Size, Medium Arm
104,74 € +VATOut of stock
Tab-Tite Dual Suction Mount with Extension Knob for iPad Gen 1–4, B-Size, Short Arm
214,22 € +VATOut of stock
Tab-Tite Dual Suction Mount for iPad Gen 1–4, B-Size, Short Arm
151,18 € +VATOut of stock
Tab-Tite Dual Suction Mount for iPad Gen 1–4 with Extended Retention Knob, B-Size, Medium Arm
215,64 € +VATOut of stock
Tab-Tite Dual Suction Mount for iPad Gen 1–4 without Case, B-Size, Medium Arm
144,31 € +VATOut of stock
Tab-Tite Dual Suction Cup Tablet Mount for Apple iPad, B-Size, Medium Arm
198,10 € +VATOut of stock
Tab-Tite with Tough-Wedge Mount for 10" Tablets, B-Size, Long Arm
177,96 € +VATOut of stock
No-Drill Tab-Tite iPad 1–4 Mount for 1999–2016 Ford F-250 to F-750, C-Size
449,53 € +VATOut of stock
Tab-Tite Cup Holder Mount for Apple iPad, RAM-A-CAN II, B-Size, Long Arm
150,00 € +VATOut of stock
Questions about RAM-HOL-TAB3U
My iPads are going into cases – do I need new holders?
Not necessarily. Replace the cups with RAM-HOL-TAB17-CUPSU, the set sized for the same iPad models in a case; the backplate stays.
Does RAM-HOL-TAB3U fit the iPad Pro 11"?
RAM lists the iPad Pro 11" from the 1st to the 4th generation, used without a case.
Should I add a tether?
RAM recommends one for off-road driving and open cockpits, as a backup in case the tablet is knocked loose.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

