Troubleshooting

Zebra ZD611 troubleshooting: lights, errors and fixes

What the five ZD611 status lights mean and how to fix media out, cover open, cut errors, calibration problems, faded or blank labels and jobs that don't print.

10 min Difficulty: Easy Updated: By SCANSHOP team
In this guide

    The ZD611d reports problems with five status lights. Find your lights or symptom below. More help: ZD611 setup guide and all ZD611 guides.

    What the lights mean

    Light Pattern Meaning
    STATUS Steady green Ready to print
    STATUS Green, slowly on and off Sleep (low-power) mode
    STATUS Steady red Media out or not detected, cover open, cut error, or printhead not recognised
    STATUS Steady amber Printhead too hot, printhead element fault, out of memory, or a power fault on the USB host or serial port
    STATUS Flashing amber Printhead too cold
    STATUS + PAUSE Both flashing red Printhead overheated
    PAUSE Steady amber Paused
    DATA Flashing amber Out of memory
    SUPPLIES Steady red Media out
    NETWORK Steady red Ethernet or Wi-Fi fault

    Find your symptom

    What you see Likely cause Fix
    STATUS + SUPPLIES steady No labels detected Fix 1 →
    STATUS + PAUSE steady Cover open or not latched Fix 2 →
    STATUS steady, all other lights off Cutter blade stuck (cutter models) Fix 3 →
    STATUS steady or flashing, or STATUS and PAUSE flashing red Printhead too hot or too cold Fix 4 →
    STATUS + DATA flashing Printer memory full Fix 5 →
    Labels skip, print runs across the gap, or media out with labels loaded Sensor position or calibration Fix 6 →
    Print is pale, patchy or has white lines Darkness, speed, dirty printhead Fix 7 →
    Labels feed but stay blank Wrong label type or loaded upside down Fix 8 →
    Nothing prints from the PC, PAUSE on, or NETWORK red Paused, driver or connection Fix 9 →

    Fixes

    1. Media outSTATUS and SUPPLIES steady red

    CauseThe roll is empty, a label is missing on the liner, or the sensor can't see the labels.

    Fix

    1. Roll empty? Load a new one with the printer still on, so the job isn't lost.
    2. Missing label? Open the cover and pull the labels forward until the next label sits over the platen roller.
    3. Check that the labels run under both media guides and that the roll turns freely.
    4. Close the cover and press FEED once.
    5. Still red with labels loaded? Go to Fix 6.
    2. Cover openSTATUS red, PAUSE amber

    CauseThe cover is not fully latched, or its switch is faulty.

    Fix

    1. Press down on the front of the cover until it snaps shut on both sides.
    2. Still on with the cover closed? The printer needs service. Contact us.
    3. Cut errorSTATUS steady red on its own

    CauseThe cutter blade is bound and can't move properly, usually because of adhesive and paper particles.

    Fix

    1. Make sure the cover is latched (Fix 2).
    2. Hold POWER for 5 seconds and wait until the printer has shut down completely.
    3. Switch it on again.
    4. Error returns? Contact us; the cutter has no user-serviceable parts.
    Important

    Never remove the cutter cover or put fingers or objects into it. Zebra warns that cotton swabs and solvents, including alcohol, can damage the cutter or cause jams.

    4. Printhead too hot or too coldSTATUS amber or flashing

    CauseToo hot: a long run of dense labels, a hot room or direct sunlight. Too cold: the room is below the printer's minimum operating temperature.

    Fix

    1. STATUS steady amber: wait; printing resumes once the printhead has cooled.
    2. STATUS and PAUSE flashing red: switch off, let the printer cool for several minutes and switch on again.
    3. Too cold: switch off, move the printer somewhere warmer and let it warm up slowly to avoid condensation. Alert stays? Contact us.
    5. Out of memorySTATUS amber, DATA flashing amber

    CauseNo room is left to store a label format, graphic or font.

    Fix

    1. Make the label format or its print area smaller, or delete stored graphics, fonts and formats you no longer use.
    6. Labels skip or calibration failsSkipped labels, print across the gap, false media out

    CauseWrong sensor position, or the printer was calibrated for different labels.

    Fix

    1. Check the sensor: centre (default) for gap labels and continuous paper; on the middle of the black mark or notch otherwise.
    2. Run SmartCal: with STATUS steady green, hold PAUSE + CANCEL for 2 seconds. The printer feeds a few labels and returns to steady green.
    3. Still skipping? Calibrate manually:
      1. Hold PAUSE for 2 seconds. All lights flash amber, then STATUS stays amber: this is manual media calibration mode.
      2. Press PAUSE. SUPPLIES flashes, then PAUSE flashes.
      3. Open the cover. Peel the labels off the first 80 mm of liner and lay the bare liner over the platen roller, with the front edge of the first label under the media guides. Close the cover and press PAUSE.
      4. SUPPLIES flashes while the printer measures the liner. When PAUSE flashes, open the cover, pull the labels forward until a label sits directly over the sensor, and close it.
      5. Press PAUSE. The printer feeds several labels and returns to steady green when it has measured them.
    4. If it doesn't finish, move the sensor slightly and repeat. With pre-printed labels, place the sensor where there is least printing.
    ZD411/ZD421/ZD611/ZD621 Manual Media Calibration

    Video: Zebra Technologies (shown on a ZD411)

    7. Faded or patchy printPale, uneven print or white lines

    CauseWrong darkness or speed, a dirty or worn printhead or platen roller, or the wrong power supply.

    Fix

    1. Raise the darkness or lower the speed in the driver's printing preferences or your label software. Don't go above the maximum speed your labels are rated for.
    2. Clean the printhead as described in Zebra's printhead cleaning instructions, and check the platen roller for dirt or damage.
    3. Use only the power supply that came with the printer.
    4. White lines after cleaning mean a worn printhead or platen. Contact us.
    8. Labels come out blankNo alert, labels feed without print

    CauseLabels that need a ribbon, or labels loaded upside down.

    Fix

    1. Scratch the label quickly with a fingernail. No black mark: the labels are not direct thermal; replace them.
    2. Check that the print side faces up towards the printhead.
    9. Nothing prints from the PCJob sent, printer does nothing

    CauseThe printer is paused, the ZDesigner driver is missing, or the network is down.

    Fix

    1. PAUSE amber: press PAUSE to continue. To delete jobs first, press CANCEL while paused (next job) or hold it for 2 seconds (all jobs).
    2. Printer shown as an unknown or "Unspecified device" in Windows: it was connected before the driver was installed. Follow our ZDesigner driver guide.
    3. Hold FEED + CANCEL for 2 seconds. If the configuration report prints, the problem is on the PC or network side.
    4. NETWORK red: check the Ethernet cable at both ends, then read the IP address on the report and compare it with the printer port in Windows.
    Note

    Printers with Zebra's EU Protected Mode need its password to change protected network settings (see our ZD611 setup guide).

    Frequently asked questions

    What does a red light on the Zebra ZD611 mean?

    STATUS and SUPPLIES both red: media out. STATUS red with PAUSE amber: cover not latched. STATUS red on its own: a cut error on cutter models.

    How do I calibrate the ZD611?

    With STATUS steady green, hold PAUSE and CANCEL for 2 seconds to run SmartCal. If labels still skip, calibrate manually (Fix 6).

    How do I reset the ZD611 to factory settings?

    Switch the printer off, hold PAUSE and FEED while you switch it on, and release when STATUS is the only light on. This resets the printer settings but not the network settings; calibrate again afterwards.

    Was this guide helpful?

    Used in this guide

    Compatible consumables and accessories for the ZD611.

    Compatible labels

    ProductSize (W × H) Material Labels / rollCorePrice
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (800262-125) Zebra Z-Select 2000D800262-12557.15 × 31.75 mm Thermal Paper 210025.4 mm14,06 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 51x25mm, 2580 labels/roll, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (880199-025D) Zebra Z-Select 2000D880199-025D51 × 25 mm Thermal Paper 258025.4 mm14,06 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 57x51mm, 1370 labels/roll, perforated, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (800262-205) Zebra Z-Select 2000D800262-20557 × 51 mm Thermal Paper 137025.4 mm14,06 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 38.1 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880595-025DU) Zebra Z-Perform 1000D880595-025DU38.1 × 25.4 mm Thermal Paper 258025.4 mm11,76 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50.8 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880175-031D) Zebra Z-Perform 1000D880175-031D50.8 × 31.75 mm Thermal Paper 210025.4 mm13,12 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 31.75 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800261-105) Zebra Z-Select 2000D800261-10531.75 × 25.4 mm Thermal Paper 258025.4 mm9,27 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 57.15 mm, H: 101.6 mm, D: 127 mm, C: 25.4 mm (800262-405) Zebra Z-Select 2000D800262-40557.15 × 101.6 mm Thermal Paper 70025.4 mm14,06 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, removeable, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 38x25mm, 2580 labels/roll, perforated, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (800261-107) Zebra Z-Select 2000D800261-10738 × 25 mm Thermal Paper 258025.4 mm12,98 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 57x76mm, 930 labels/roll, perforated, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (3007209-T) Zebra Z-Select 2000D3007209-T57 × 76 mm Thermal Paper 93025.4 mm14,06 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 57.15 mm, H: 19.05 mm, D: 127 mm, C: 25.4 mm (800262-075) Zebra Z-Select 2000D800262-07557.15 × 19.05 mm Thermal Paper 331525.4 mm14,06 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 31x22mm, 2780 labels/roll, perforated, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (3007208-T) Zebra Z-Select 2000D3007208-T31 × 22 mm Thermal Paper 278025.4 mm9,27 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 25.4 mm, H: 76.2 mm, D: 127 mm, C: 25.4 mm (3007207) Zebra Z-Select 2000D300720725.4 × 76.2 mm Thermal Paper 93025.4 mm8,64 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D Removable, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (800262-127) Zebra Z-Select 2000D Removable800262-12757.15 × 31.75 mm Thermal Paper 210025.4 mm15,76 €+VATIn stock
    Zebra Z-Select 2000D 190 Tag, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 102mm, dimensions (WxH) 32x57mm, 600 labels/roll, perforated, sensing slot, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (800999-005) Zebra Z-Select 2000D 190 Tag800999-00532 × 57 mm Thermal Paper 60025.4 mm9,10 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, 8000D Jewelry without flaps, W: 56 mm, H: 13 mm, D: 127 mm, C: 25.4 mm (10010064) Zebra 8000D Jewelry without flaps1001006456 × 13 mm Thermal Paper 351025.4 mm42,73 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 29 mm, H: 33 mm, D: 127 mm, C: 25.4 mm (3012789-T) Zebra Z-Perform 1000D3012789-T29 × 33 mm Thermal Paper 200025.4 mm12,70 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 31.75 mm, H: 12.7 mm, D: 127 mm, C: 25.4 mm (880169-012D) Zebra Z-Perform 1000D880169-012D31.75 × 12.7 mm Thermal Paper 465025.4 mm13,93 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 31.75 mm, H: 76.2 mm, D: 127 mm, C: 25.4 mm (880169-076D) Zebra Z-Perform 1000D880169-076D31.75 × 76.2 mm Thermal Paper 93025.4 mm15,89 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 38.1 mm, H: 12.7 mm, D: 127 mm, C: 25.4 mm (3007189-T) Zebra Z-Perform 1000D3007189-T38.1 × 12.7 mm Thermal Paper 505025.4 mm19,54 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 38.1 mm, H: 19.05 mm, D: 127 mm, C: 25.4 mm (880171-019D) Zebra Z-Perform 1000D880171-019D38.1 × 19.05 mm Thermal Paper 330025.4 mm16,37 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 38.1 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880171-031D) Zebra Z-Perform 1000D880171-031D38.1 × 31.75 mm Thermal Paper 210025.4 mm16,37 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 40 mm, H: 40 mm, D: 127 mm, C: 25.4 mm (3012558-T) Zebra Z-Perform 1000D3012558-T40 × 40 mm Thermal Paper 167525.4 mm17,40 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D Removable, W: 40 mm, H: 40 mm, D: 127 mm, C: 25.4 mm (3012759-T) Zebra Z-Perform 1000D Removable3012759-T40 × 40 mm Thermal Paper 171025.4 mm18,93 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 44.45 mm, H: 12.7 mm, D: 127 mm, C: 25.4 mm (880173-012D) Zebra Z-Perform 1000D880173-012D44.45 × 12.7 mm Thermal Paper 465025.4 mm18,98 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50.8 mm, H: 38.1 mm, D: 127 mm, C: 25.4 mm (3008727-T) Zebra Z-Perform 1000D3008727-T50.8 × 38.1 mm Thermal Paper 173025.4 mm15,81 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50.8 mm, H: 101.6 mm, D: 127 mm, C: 25.4 mm (880599-101DU) Zebra Z-Perform 1000D880599-101DU50.8 × 101.6 mm Thermal Paper 70025.4 mm16,23 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50.8 mm, H: 12.7 mm, D: 127 mm, C: 25.4 mm (880175-012D) Zebra Z-Perform 1000D880175-012D50.8 × 12.7 mm Thermal Paper 465025.4 mm16,44 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Select 2000D 190 Tag, W: 57 mm, H: 34.93 mm, D: 127 mm, C: 25.4 mm (800999-009) Zebra Z-Select 2000D 190 Tag800999-00957 × 34.93 mm Thermal Paper 96725.4 mm11,98 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 57.15 mm, H: 38.1 mm, D: 127 mm, C: 25.4 mm (3007899-T) Zebra Z-Perform 1000D3007899-T57.15 × 38.1 mm Thermal Paper 172025.4 mm17,82 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (3011250-T) Zebra Z-Perform 1000D3011250-T57.15 × 31.75 mm Thermal Paper 206025.4 mm18,06 €+VATOut of stock View
    Thermal labels 32x20 / 2000 pcs, 25 g, semi-gloss acrylic adhesive 1 row outer beam white color rounded corners, plastic core Thermal labels 32x20 / 2000 pcsKK00117632 × 20 mm Thermal Paper 200025 mm3,72 €+VATIn stock
    Paper direct thermal labels 40x40 / 1000 pcs, 40 g, semi-glossy, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 40x40 / 1000 pcsKK00019340 × 40 mm Thermal Paper 100040 mm3,26 €+VATIn stock
    Thermal labels 50x30 / 1000 pcs, 40 g, semi-gloss acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 50x30 / 1000 pcsKK00053850 × 30 mm Thermal Paper 100040 mm3,72 €+VATIn stock
    Thermal labels 40x25 / 2000 pcs, 40 g, semi-gloss release adhesive 1 row outer coil rounded corners Thermal labels 40x25 / 2000 pcsKK00048840 × 25 mm Thermal Paper 200040 mm9,28 €+VATIn stock
    Thermal labels 30x10 / 2000 pcs, 40 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 30x10 / 2000 pcsKK00014830 × 10 mm Thermal Paper (Eco) 200040 mm4,18 €+VATIn stock
    Thermal labels 32x20 / 180 pcs, 25 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 32x20 / 180 pcsKK00079832 × 20 mm Thermal Paper (Eco) 18025 mm0,70 €+VATIn stock
    Paper thermal labels 32x20 / 2500 pcs, 25 g, eco acrilic glue, an external coil, white, corners rounded Paper thermal labels 32x20 / 2500 pcsKK00117732 × 20 mm Thermal Paper (Eco) 250025 mm6,04 €+VATIn stock
    Paper thermal labels 32x20 / 2000 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 32x20 / 2000 pcsKK00014732 × 20 mm Thermal Paper (Eco) 200040 mm3,72 €+VATIn stock
    Paper thermal labels 32x25 / 2000 pcs, 25 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 32x25 / 2000 pcsKK01022732 × 25 mm Thermal Paper (Eco) 200025 mm2,88 €+VATIn stock
    Paper thermal labels 40x30 / 1000 pcs, 40 g, eco acrilic glue, an external coil, white, corners rounded Paper thermal labels 40x30 / 1000 pcsKK00146540 × 30 mm Thermal Paper (Eco) 100040 mm3,26 €+VATIn stock
    Thermal labels 50x25 / 1000 pcs, 40 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 50x25 / 1000 pcsKK00077050 × 25 mm Thermal Paper (Eco) 100040 mm4,64 €+VATIn stock
    Paper thermal labels 55x80 / 500 pcs, 40 g, top, adhesive, an external coil, 1 row, white, rounded corners Paper thermal labels 55x80 / 500 pcsKK01595055 × 80 mm Thermal Paper (Top) 50040 mm5,86 €+VATIn stock
    Thermal labels 60x30 / 1000 pcs, 40 g, eco acrylic glue 1 row outer coil rounded corners white Thermal labels 60x30 / 1000 pcsETEBA-0600/0300-210060 × 30 mm Thermal Paper (Eco) 100040 mm4,42 €+VATIn stock
    Thermal labels 60x40 / 1000 pcs, 40 g, eco acrylic release adhesive 1 row outer coil color white rounded corners Thermal labels 60x40 / 1000 pcsKK01039560 × 40 mm Thermal Paper (Eco) 100040 mm6,50 €+VATIn stock
    Thermal labels 60x30 / 1000 pcs, 40 g, semi-gloss acrylic adhesive 1 row outer coil yellow color rounded corners Thermal labels 60x30 / 1000 pcsKK0172660 × 30 mm Thermal Paper 100040 mm14,86 €+VATIn stock
    Thermal labels 60x30 / 1000 pcs, 40 g, semi-gloss acrylic adhesive 1 row outer beam pink color rounded corners Thermal labels 60x30 / 1000 pcsKK0172760 × 30 mm Thermal Paper 100040 mm14,86 €+VATIn stock
    Thermal labels 60x30 / 1000 pcs, 40 g, semi-gloss acrylic adhesive 1 row outer beam orange color rounded corners Thermal labels 60x30 / 1000 pcsKK0172860 × 30 mm Thermal Paper 100040 mm16,72 €+VATIn stock
    Paper thermal labels 40x25 / 2000 pcs, 40 g, eco, acrylic adhesive, 1 row, an external coil, white, rounded corners Paper thermal labels 40x25 / 2000 pcsKK06982740 × 25 mm Thermal Paper (Eco) 200040 mm4,64 €+VATIn stock
    Thermal labels 30x20 / 2000 pcs, 40 g, eco 1 row acrylic adhesive, plastic core, outer winding white color rounded corners Thermal labels 30x20 / 2000 pcsKK06986830 × 20 mm Thermal Paper (Eco) 200040 mm3,72 €+VATIn stock
    Thermal labels 60x30 / 1000 pcs, 40 g, matt acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 60x30 / 1000 pcsKK07019260 × 30 mm Thermal Paper 100040 mm5,10 €+VATIn stock
    Thermal labels 50x30 / 1000 pcs, 40 g, rubber glue 1 row an external coil white color rounded corners Thermal labels 50x30 / 1000 pcsKK00126050 × 30 mm Thermal Paper 100040 mm3,72 €+VATIn stock
    Thermal cardboard Tags 50x37 / 1000 pcs, 40 g, eco, glueless, white, perforated black mark , 1S-120 Thermal cardboard Tags 50x37 / 1000 pcsKK00031850 × 37 mm Thermal Cardboard 100040 mm9,28 €+VATIn stock
    Thermal labels 50x30 / 1000 pcs, 40 g, acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 50x30 / 1000 pcsKK00110950 × 30 mm Thermal Paper 100040 mm3,72 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 35 mm, H: 149.23 mm, D: 127 mm, C: 25.4 mm (3003772-T) Zebra Z-Perform 1000D3003772-T35 × 149.23 mm Thermal Paper 48025.4 mm15,11 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 38.1 mm, H: 76.2 mm, D: 127 mm, C: 25.4 mm (880595-076DU) Zebra Z-Perform 1000D880595-076DU38.1 × 76.2 mm Thermal Paper 93025.4 mm16,49 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 40 mm, H: 25 mm, D: 127 mm, C: 25.4 mm (3008503-T) Zebra Z-Perform 1000D3008503-T40 × 25 mm Thermal Paper 249025.4 mm16,37 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 44.45 mm, H: 19.05 mm, D: 127 mm, C: 25.4 mm (880173-019D) Zebra Z-Perform 1000D880173-019D44.45 × 19.05 mm Thermal Paper 330025.4 mm18,90 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 45 mm, H: 25 mm, D: 127 mm, C: 25.4 mm (3011447-T) Zebra Z-Perform 1000D3011447-T45 × 25 mm Thermal Paper 244125.4 mm17,65 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50 mm, H: 215 mm, D: 127 mm, C: 25.4 mm (3013290-T) Zebra Z-Perform 1000D3013290-T50 × 215 mm Thermal Paper 33925.4 mm21,41 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50.8 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (3003392) Zebra Z-Perform 1000D300339250.8 × 50.8 mm Thermal Paper 141025.4 mm18,38 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50.8 mm, H: 165.1 mm, D: 127 mm, C: 25.4 mm (3012297-T) Zebra Z-Perform 1000D3012297-T50.8 × 165.1 mm Thermal Paper 44225.4 mm18,16 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50.8 mm, H: 76.2 mm, D: 127 mm, C: 25.4 mm (3011661-T) Zebra Z-Perform 1000D3011661-T50.8 × 76.2 mm Thermal Paper 93825.4 mm16,49 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 60 mm, H: 71320 mm, D: 127 mm, C: 25.4 mm (3009731-T) Zebra Z-Perform 1000D3009731-T60 × 71320 mm Thermal Paper 125.4 mm17,40 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D Removable, W: 31.75 mm, H: 76.2 mm, D: 127 mm, C: 25.4 mm (880665-076DU) Zebra Z-Perform 1000D Removable880665-076DU31.75 × 76.2 mm Thermal Paper 93025.4 mm16,24 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880175-025D) Zebra Z-Perform 1000D880175-025D50.8 × 25.4 mm Thermal Paper 258025.4 mm16,34 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 57.15 mm, H: 38.1 mm, D: 127 mm, C: 25.4 mm (880177-038D) Zebra Z-Perform 1000D880177-038D57.15 × 38.1 mm Thermal Paper 179025.4 mm17,19 €+VATOut of stock View
    Labels, Zebra, Thermal Paper, 8000D Jewelry with flaps, W: 56 mm, H: 13 mm, D: 127 mm, C: 25.4 mm (10010065) Zebra 8000D Jewelry with flaps1001006556 × 13 mm Thermal Paper 351025.4 mm42,73 €+VATOut of stock View

    More ZD611 guides

    ZD611 ComparisonZebra ZD611 vs ZD621: 2-inch or 4-inch desktop printer?5 min · Easy ZD611 SetupZebra ZD611 setup guide: labels, calibration, driver15 min · Easy

    Related guides

    ZT610 TroubleshootingZebra ZT610 and ZT620 troubleshooting: alerts, lights and fixes15 min · Easy
    Still stuck?

    Send us your model and a short description of the problem. Our team will help you find a solution.

    Contact support
    Zebra ZD611d Desktop Label Printer (ZD6A023-D2EE00EZ)483,33 €+VAT View product