How-to

Fire truck tablet mounts: RAM Mounts docks for fire and rescue

How to choose and install RAM Mounts tablet mounts in fire apparatus: officer-side position, IntelliSkin and GDS docks, Zebra ET6x/ET8x docks, No-Drill bases, frost and heat, locking and hardwired power.

60 min Difficulty: Medium Updated: By SCANSHOP team
In this guide

    A fire truck tablet mount keeps the officer's dispatch or map tablet readable, charged and secure on rough roads, clear of the driver's view and the airbags. This guide helps fleet managers, IT teams and vehicle builders choose and install RAM Mounts in fire and rescue vehicles.

    RAM Mounts logo

    Before you start

    You'll need
    • The tablet model and its sleeve, frame or keyboard
    • Who uses it: the officer, the rear crew or both
    • Photos of dashboard, console, seat mounts and airbag labels
    • The vehicle's voltage and the builder's rules for drilling and wiring
    • A qualified installer for the wiring

    Which option to choose

    RAM's Fire & Rescue page offers two docking routes:

    Slim tablet + IntelliSkin + GDS dock Zebra 2-in-1 + RAM powered dock
    Tablets iPad, Galaxy Tab Active5 and more ET60/ET65, ET80/ET85, keyboard optional
    Charging Pads on the sleeve; USB-C into the dock Pogo pins; 5.5 mm DC into the dock
    Cold and heat Cool-Dock with fan Heated pins, Temp-Right heater (ET6x)
    Mounting 4-hole AMPS ball adapter 75 × 75 mm VESA and 4-hole AMPS
    123456789
    1 Slim tablet in IntelliSkin · 2 Sleeve pads on dock contacts · 3 AMPS ball adapter · 4 2-in-1 tablet and keyboard in a powered dock · 5 Key lock · 6 USB-A ports · 7 Ball mount on VESA plate · 8 USB-C hardwire charger, fused · 9 5.5 mm DC hardwire charger, fused

    Plan the fire truck tablet mount position

    In RAM's overview of fire fleet deployments, "The officer in the captain's chair interprets dispatch information" and devices "may be docked during responses, removed at staging for command reference, and remounted for transport": place the dock within the officer's reach.

    • Keep the driver's view of road and mirrors clear.
    • Keep radio, siren and light controls reachable.
    • Check airbag labels, including curtain and knee airbags.
    Check

    RAM: "Do not install this product near or over an airbag deployment area or in a location that obstructs the driver's vision or interferes with vehicle operation." Follow the vehicle maker's and RAM's instructions.

    1234567
    1 Driver's line of sight · 2 Steering-wheel airbag · 3 Passenger airbag, if fitted · 4 Dock turned to the officer · 5 Officer's seat · 6 Radio panel · 7 Mount base

    Dock slim tablets in IntelliSkin and a GDS dock

    RAM calls the USB charging port "one of the most common failure points in tablet deployment". IntelliSkin "converts the exposed USB port into ruggedized pogo pad contacts", and the GDS dock charges through them. RAM says the Next Gen sleeves add "military-grade drop protection" and keep a USB-C port for charging off the dock.

    • Tough-Dock: "a form-fit, device-specific solution with reinforced retention and integrated power" (RAM). The Cool-Dock adds a fan.
    • Uni-Conn: one dock for mixed tablet models; each tablet needs a sleeve and a button adapter (ask us). RAM says its spring-loaded Uni-Conn docks are "not recommended for high vibration or open cockpit applications".
    iPad in a RAM IntelliSkin sleeve and GDS dock on a short RAM arm on the dashboard of a fire truck cab, officer side
    An iPad in an IntelliSkin sleeve and GDS dock on a short RAM arm, officer side of a fire truck cab. Photo: RAM Mounts

    For the Galaxy Tab Active5: the IntelliSkin Next Gen sleeve with the Cool-Dock or Locking Cool-Dock (RAM: the sleeve doesn't support No Battery Mode). For the iPad 10th and 11th Gen: the iPad IntelliSkin Next Gen with the iPad Cool-Dock, which needs a Power Delivery charger (RAM). Sleeves are sold separately.

    Recommended RAM Mounts for slim tablets in fire trucks

    Samsung Galaxy Tab Active5 in the RAM Mounts IntelliSkin Next Gen protective sleeve, compatible with GDS Uni-Conn docks
    RAM MOUNTRAM Mounts IntelliSkin Next Gen Sleeve for Samsung Galaxy Tab Active5Part no. RAM-GDS-SKIN-SAM90-NG
    132,23 €+VATIn stock
    RAM Mounts GDS Cool-Dock with Fan for Samsung Tab Active5 and 3 – product photo
    RAM MOUNTRAM Mounts GDS Cool-Dock with Cooling Fan for Samsung Galaxy Tab Active5 & Active3Part no. RAM-GDS-DOCKF-SAM62CPU
    303,79 €+VATAvailable on request

    Buying for a fleet or a tender? Ask us for a quote.

    Get a quote

    Video: RAM Mounts

    Choose a Zebra ET60 or ET80 vehicle dock

    Zebra's ET80/ET85 are "Rugged 2-in-1 Windows Tablets"; the ET60/ET65 run Android or Windows. RAM's powered docks charge both, with or without the keyboard:

    ET8x Locking Dock ET6x Locking Dock, heated pins
    Tablets ET80, ET85, with or without Rugged Frame ET60, ET65
    Keyboard Takes the Friction Hinge Rugged Keyboard Latch holds the tablet; keyboard opens freely
    Power Pogo pins, 5.5 mm DC input Pins heated against freezing, 5.5 mm DC input
    Both Key lock, 2 × USB-A (900 mA per port), 75 × 75 mm VESA and AMPS
    Zebra ET80 2-in-1 rugged tablet with keyboard in a RAM Mounts powered dock on a fire truck dashboard
    A Zebra ET80 with its keyboard in a RAM powered dock on a fire truck dashboard. Photo: RAM Mounts

    Mount and weight: the docks' 75 × 75 mm VESA pattern matches RAM's steel-reinforced D-size VESA plate, which has both 75 × 75 and 100 × 100 mm holes (our pairing: RAM names no ball kit for these docks). RAM lists D size for "Rugged tablets, laptops, and heavy equipment" at about 6 lb (≈ 2.7 kg): "Approximate capacity for a standard ball with a mid-length arm. Shorter arms and steel-reinforced posts increase real-world capacity." An ET60/ET65 (2.44 lb, standard battery, Zebra) in its dock (2.18 lb, RAM) is about 4.6 lb (≈ 2.1 kg) before the keyboard: add a short or medium D-size arm and a D-size round plate. An ET80/ET85 (2.8 lb) with keyboard (1.85 lb, both Zebra) in the ET8x dock (2.8 lb, RAM) is about 7.5 lb (≈ 3.4 kg), above that figure, where RAM advises the next ball size up: ask us for the mount (see our RAM ball sizes guide). Tablet setup: our ET60/ET65 guide.

    Recommended RAM Mounts for Zebra 2-in-1 tablets in fire trucks

    RAM Mounts Key-Locking Power + Dual USB-A Dock for Zebra ET80 and ET85 – main product photo
    RAM Mounts Key-Locking Power + Dual USB-A Dock with Heated Pins for Zebra ET60 and ET65 – main product photo
    RAM MOUNTRAM Mounts Key-Locking Power + Dual USB-A Dock with Heated Pins for Zebra ET60 & ET65Part no. RAM-HOL-ZE25PD2HLU
    721,56 €+VATAvailable on request
    RAM Mounts Temp-Right dock heating module for Zebra ET6x and Getac ZX10 docks – main product photo
    RAM MOUNTRAM Mounts Temp-Right Dock Heating Module for Zebra ET6x & Getac ZX10Part no. RAM-DOCK-HEATER1-EU
    282,94 €+VATAvailable on request

    Buying for a fleet or a tender? Ask us for a quote.

    Get a quote

    Plan for frost and summer heat

    RAM warns that in heat "tablets can overheat and enter thermal shutdown". Zebra rates the ET60/ET65 for −20 to +55 °C (standard battery) and 5–40 °C for charging.

    Problem RAM option What RAM states
    Tablet too cold Temp-Right heater, ET6x and ZX10 docks only On below about 0 °C (32 °F), off at a safe operating temperature; operating range −30 to +70 °C
    Tablet too hot Cool-Dock Built-in 12 V DC fan with a 2.2 m hardwire power cable

    The heater needs RAM's "24-60VDC Input (12VDC Output) Charger" (RAM-GDS-CHARGE-V16U), so check the vehicle voltage. For the Cool-Dock fan's power feed, ask us.

    Choose a vehicle base: drill-down or No-Drill

    Use a drill-down base where the body builder allows drilling; RAM's case studies show US fire departments using drill-down mounts, vertical bases and swing arms. Otherwise, RAM offers No-Drill bases that "use your vehicle's passenger-side seat bolts".

    RAM No-Drill vehicle base fixed at existing floor mounting points, carrying a pole with a rugged tablet holder on a RAM ball arm
    Left: a rugged tablet holder on a RAM ball arm and pole. Right: its No-Drill base at existing floor mounting points. Photo: RAM Mounts

    For its universal No-Drill laptop mount (now Legacy), RAM's tested vehicles are US-market models; RAM warns some installs "may limit the adjustability of the passenger seat" and recommends the base mainly for left-hand-drive vehicles. RAM states no fit for European fire apparatus, so check the seat fixings with the body builder.

    Video: RAM Mounts

    Lock the tablet and the mount

    Both Zebra docks are key-locking, and the Tab Active5 docks come in locking versions. To stop the arm being unscrewed, fit a Pin-Lock security nut to a D- or E-size arm (RAM: "safe from theft and tampering"). More in our locking tablet mount guide.

    Hardwire the power and test

    • USB-C GDS docks (Tough-Dock, Cool-Dock, Uni-Conn): a USB-C GDS charger such as the RAM-GDS-CHARGE-V3C-3U (10–30 V DC in, Power Delivery, 45 W), which RAM offers for "any USB Type-C GDS vehicle solution".
    • Zebra ET6x and ET8x docks take a 5.5 mm DC plug, and RAM names no charger for them: send us the vehicle voltage and we'll confirm one.

    RAM's wiring diagram offers "Direct to Battery" (always on) or "To Cab Fuse Block" (on ignition). Leave the wiring to a qualified installer, fused per the charger's and the vehicle maker's instructions; see our GDS hardwire charger guide.

    Test docking with gloves on, check charging with the ignition on (and off, if wired for constant power), test the locks and retighten the knob after the first drives. Make the first truck your template: in a RAM case study, a US fire and EMS department reports that with an install blueprint, new rigs "could be equipped in approximately 20 minutes".

    Extend it to the station and the fleet

    For the station and other vehicles, see our fire station tablet charging docks, ambulance tablet mounts and rugged tablet vehicle mounts guides.

    SCANSHOP is an official RAM Mounts reseller. Send us the tablet model, vehicle type and voltage, and we'll quote a parts list for one truck or the whole fleet.

    Frequently asked questions

    What is the best tablet mount for a fire truck?

    An IntelliSkin sleeve and GDS dock for an iPad or Galaxy Tab Active5; RAM's key-locking powered dock for a Zebra ET6x or ET8x, on a mount rated for the set's weight. Always clear of airbags and the driver's view.

    Is there a RAM vehicle dock for the Zebra ET80?

    Yes: the RAM Power + Dual USB Locking Dock for Zebra ET8x (RAM-HOL-ZE22PD2LU). It charges and locks the ET80 or ET85, has two USB-A ports and takes Zebra's keyboard.

    Can you use an iPad in a fire truck?

    RAM's fire case studies show iPads in IntelliSkin sleeves and GDS docks. RAM notes consumer tablets "are not built to withstand tough environments"; the sleeve protects the tablet and its charging port.

    How do I keep a vehicle tablet working in freezing weather?

    Use a heated-pin dock; for Zebra ET6x or Getac ZX10 docks, add the Temp-Right heater (on below about 0 °C). Zebra's ET6x charging range is 5–40 °C.

    Was this guide helpful?

    Used in this guide

    Compatible consumables and accessories for the Zebra ET60.

    Products used in this guide

    More Zebra ET60 guides

    Still stuck?

    Send us your model and a short description of the problem. Our team will help you find a solution.

    Contact support
    RAM Mounts Power + Dual USB Locking Dock for Zebra ET8x 2-in-1 Tablet (RAM-HOL-ZE22PD2LU)542,42 €+VAT View product